We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
one. HS series slurry pump is created for the steady pumping of substantial abrasive, substantial density slurries with minimal servicing specifications. The sporting elements are created of ultra chrome or and rubber. It will maintain high effectiveness more than the wear lifestyle of its factors.
two. The metal soaked parts and rubber kinds can be interchangeable for managing distinct liquids or slurries.
three. HS slurry pumps are offered in sizes ranging from 1 inch to 18 inch discharge and function higher performance functionality capable of flow charges from 10.8 to 5400 m³/h and heads up to 125 meters for large head versions.
Functions:
1. Cylindrical framework of bearing assembly: hassle-free to adju EPT the place among impeller and EPT liner
and can beremoved comple tel: +86~13 0571 88828y
2. Interchangeable anti-abrasive soaked parts produced of substantial-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs give high running stress abilities
and an additional evaluate of safety.
4. The discharge branch can be oriented to any eight positions at the interval of forty five levels
5. A variety of drive sorts: DC(direct relationship), V-belt drive, gear box reducer, hydraulic couplings, VFD,
S EPT control, and so forth
six. The shaft seal utilizes the packing seal, expeller seal and mechanical seal
Typical Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • Development |
| • Alumina Sector | • Power Plant | • Potash Fertilizer Plant | • EPT industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Model | Max Electrical power (Kw) |
Inlet & Outlet dimension (inch) | Content for Put on Components | Movement Charge (Q) | Head (H) meter |
Pace (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | 1.5/1 | M | 12.6~28.eight | 3.5~8 | six~68 | 1200~3800 | 152 |
| R | 10.8~25.two | 3~seven | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | 2/1.five | M | 32.4~72 | nine~20 | six~fifty eight | 1200~3200 | 184 |
| R | 25.2~54 | 7~fifteen | 5.5~41 | one thousand~2600 | 178 | |||
| 50HS-C | 30 | 3/2 | M | 39.6~86.four | eleven~24 | twelve~sixty four | 1300~2700 | 214 |
| R | 36~seventy five.6 | ten~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/three | M | 86.4~198 | 24~55 | 9~52 | a thousand~2200 | 245 |
| R | 79.2~180 | 22~50 | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/four | M | 162~360 | forty~one hundred | 12~56 | 800~1550 | 365 |
| R | a hundred and forty four~324 | forty~90 | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | 120 | eight/six | M | 360~828 | 100~230 | 10~sixty one | 500~1140 | 510 |
| R | 324~720 | ninety~two hundred | seven~49 | 400~1000 | 510 | |||
| 200MS-E | 120 | 10/8 | M | 666~1440 | 185~400 | fourteen~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | ten/8 | M | 612~1368 | one hundred seventy~380 | eleven~61 | four hundred~850 | 686 |
| R | 540~1188 | 150~330 | twelve~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | seven~sixty eight | 300~800 | 762 |
| R | 720~1620 | 200~450 | 7~forty five | three hundred~650 | 762 | |||
| 300HS-TU | 560 | fourteen/12 | M | 1260~2772 | 350~770 | thirteen~sixty three | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven hundred | 13~44 | three hundred~500 | 965 | |||
| 350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/18 | M | 2520~5400 | 700~1500 | 13~fifty seven | 200~four hundred | 1370 |
| 25HHS-C | 30 | 1.5/one | M | 16.2~34.two | four.5~9.5 | 25~ninety two | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/two | M | sixty eight.4~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | 120 | four/three | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | 6/4 | M | 324~720 | ninety~two hundred | 30~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | one hundred thirty~280 | 20~ninety four | 500~a thousand | 711 |
For the substance of donning components,
“M” = metal, extremely chromium alloy “R” = anti-abrasive rubber
Welcome to speak to us any time for specifics.
Your inquiry will get our prompt attention and reaction !
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For a lot more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic products manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our organization and the shown alternative components contained herein are not sponsored, accepted, or created by the OEM.
