We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 different branches. For more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction of double phase screw air compressor
Double stage screw air compressor in the major parts with double screw,the compression approach by the fir EPT phase screw and second screw by way of grading collection compression.
Double screw air compressor in addition to uphold twin-screw compressor has the rewards of basic structure,adaptable set up and higher effectiveness,but also highlights the rewards of their very own efficient,energy-conserving:
one.can minimize the bearing load,boost volume performance,
2.in the circumstance of some load operation,can enhance efficlency,power saving.
Double screw air compressor than twin-screw compressor strength preserving up to 15%,each operate for 8000 hours a calendar year, Annual financial savings of about two hundred thousand yuan electrical power.
Benefit of two phase screw air compressor
one. Hierarchical compression to conserve compression work
Via the two-stage sequence method, the authentic one-phase compression method is divided into two compression procedures. This sort of a procedure placing can decrease the ratio of every solitary-stage compression method, which can effectively lessen the compression and compression of every stage screw. Essential drive electrical power.
In the process of perfect gasoline compression, the sum of the power necessary for one-stage pressure transmission and the power essential for multi-phase compression is equivalent, but in the actual compression approach, thanks to a series of variables these kinds of as the transmission electrical power decline of the coupling, the friction coefficient of the bearing and the viscosity of the coolant With the boost of the applied force, the worthless electrical power exceeding the same ratio is produced, so the ineffective energy in the genuine compression procedure can be reduced by lowering the compression ratio of every phase, so that the sum of the energy needed for multi-phase compression is less than that of single-phase compression Needed energy.
2. The intermediate heat oil coo EPT and minimizes the temperature of the fuel coming into the following stage. All the gasoline compression method is actually the procedure of the friction in between the fuel and the moving areas and being compressed by it.
In the presence of friction, the gas will rise in temperature thanks to friction, and there will inevitably be a development of shadow accounts. This component of power will be introduced in the sort of power in the mounted quantity of air compression by rising its own pressure.
The temperature rise of the gasoline raises the force of the gas alone in the course of the compression approach and increases the compression ratio. For that reason, it is required to spend additional electricity to drive the equipment to shrink the air to the desired stress worth. Consequently, the two-phase screw compressor is offered with a coolant injection curtain system.
Q1: What is the rotor velocity for the air conclude?
A1: 2980rmp.
Q2: What’s your lead time?
A2: usually, 5-7 days. ( EPT orders: 15days)
Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).
Q4: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.
Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.
Q6: What is your guarantee for air compressor?
A6: One year for the entire air compressor(not like the intake spare areas) and technical supports can be offered according to your demands.
Q7: Can you acknowledge EPT orders?
A7: Sure, EPT orders are warmly welcome.
Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.
Q9: Do you have spare parts in stock?
A9: Yes, we do.
Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 various branches. For much more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original products manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our organization and the outlined alternative components contained herein are not sponsored, accepted, or manufactured by the OEM.
