Tag Archives: China worm shaft

15 worm gear reducer manual Cost China in Ahvaz Iran Years Experience Manufacturing PP PE HDPE PS Double Shaft Shredder with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

15 years experience manufacturing double shaft shredder

Brief Introduction to Shredder:
The shredder is a widely used machine for tearing big material to small pieces, which make them easy for next step to transportation or recycling. It consists of single shaft shredder, double shaft shredder, four shaft shredder, horizontal big pipe shredder, smaller pipe crusher….
Plastic Shredder machine is an ideal machine for plastic, paper, wood, fiber, rubber, organic waste a wide variety of non metallic materials. The size of the machine required for each project depends on the initial size of the material, capacity and the final particle size desired.
The shredder series range is controlled by microcomputer, featuring start, stop, reverse functions. It is fitted with an automatic overload return mechanism to prevent damage to rotor and other parts. It runs at high torque, low speed, with low noise output, suitable for recycling a wide range of materials.

1. Single Shaft Shredder
Application:
The single shaft shredder is mainly used for big block objects, such as die head material, thick wall pipes, and also can be used for film roller, paper and fibers, etc….
Main characters:
1. The blades and blades rack of single shaft shredder can be demounted on the rotating shaft. It is easy to clear, change and maintenance.
2. The rotating blades of single shaft shredder are fixed on the shaft by V shape. It is good for shredding the material evenly which can make the energy consumption is low and noise is very small.
3. Every rotating blade of single shaft shredder has 4 cutting edges, after one cutting edge is worn out, it can be changed to other ones. And also with same design to the fixed blade, which has two cutting edges, also when one cutting edge is worn out, it can be change to the other one.
4. The shaft of single shaft shredder is driven by motor through the gear box, it runs stable, low noise, high torque.
5. The material is pushed by hydraulic pusher of single shaft shredder automatically. It works strong and stable.
6. The electric system of single shaft shredder is controlled by PLC, which make the shaft can rotate in positive direction, reversal direction and stop, then to protect the machines running safely.

Model:

Model	Main power	Pushing power	Qty rotating blades	Qty fixed blades	Shaft rotating diameter	Capacity (kg)	Size (mm)	Weight (kg)
TSS600	22kw	1.5kw	28	2	φ252mm	200~400	1800x1200x1800	2000
TSS800	37kw	2.2kw	38	2	φ400mm	500~800	2700x1700x2000	3200
TSS1000	45kw	2.2kw	48	3	φ400mm	700~1000	2800x2000x2300	4300
TSS1200	55kw	3.7kw	78	3	φ430mm	1000~1500	2950x2200x2500	5500
TSS1500	90kw	3.7kw	102	4	φ480mm	1300~1800	3100x2550x2700	7800
TSS2000	55kw*2	5.5kw	177	4	φ480mm	1800~2500	3300x3050x2800	9500

2. Double Shaft Shredder
Application:
The double shaft shredder is mainly used for hard material, such as barrel, basket, panel material, wood, car tires and even big bale film etc…..
Main characters:
1. The shredding cabinet of double shaft shredder is made of special thickness steel panel with precision machining. It is fixed by big angle hexagonal bolts and with strong inlet hopper. All these is to ensure the big and heavy material can be put directly into the shredding cabinets
2. The rotating blades of double shaft shredder are with special designed to the thickness, shape and arranging series which ensure it is strong cutting ability, sharpening cutting edge and then make it wor ept high efficiently.
3. Low speed running, low noise and less powder flying of double shaft shredder.
4. The blades of double shaft shredder are made of special alloy steel, strong and long time working.
5. The electric system of double shaft shredder is controlled by PLC, which make the shaft can rotate in positive direction, reversal direction and stop, then to protect the machines running safely.

Model:

Model	Motor power(KW)	Qty of blades	Size of shredding chamber	Capacity (kg/h)
TDS600	15	12	600*550 mm	300~800
TDS800	37	16	800*600 mm	500~1500
TDS1000	30×2	20	1000*700 mm	1000~2000
TDS1200	37×2	24	1200*800 mm	1500~2500
TDS1500	45kw×2	22	1600*900 mm	2000~3000

3. Double single-shaft shredder/plastic film shredder

Application:
Special for PE PP film, agriculture film, PE PP bags, film roller, package film, wrap film, LD HD film, BOPP film…
Main characters:
1. Special designed double shaft shredder for soft material.
2. The blades and blades rack can be demounted on the rotating shaft. It is easy to clear, change and maintenance.
3. The rotating blades of film shredder are fixed on the shaft by V shape. It is good for shredding the material evenly which can make the energy consumption is low and noise is very small.
4. Every rotating blade of single shaft shredder has 4 cutting edges, after one cutting edge is worn out, it can be changed to other ones. And also with same design to the fixed blade, which has two cutting edges, also when one cutting edge is worn out, it can be change to the other one.
5. The shaft of film shredder is driven by motor through the gear box, it runs stable, low noise, high torque.
6. The electric system of film shredder is controlled by PLC, which make the shaft can rotate in positive direction, reversal direction and stop, then to protect the machines running safely.

Model:

Model	Motor power(KW)	Qty of blades	Diameter of shaft	Capacity (kg/h)
TFS600	18.5×2	54	ø255 mm	500~650
TFS800	22×2	82	ø255 mm	750~900
TFS1000	30×2	100	ø300 mm	900~1100
TFS1200	37×2	122	ø300 mm	1200~1500
TFS1500	45kw×2	158	ø320 mm	1600~2000

4. Four Shaft Shredder
Application:
1. Bucket products: PE bucket, metal drum, paint bucket, intermediate -bulk container (IBC) and dustbin
2. Wastes: household waste, medical waste, kit ept waste, industrial waste, park waste
3. Plastic products: PE bottle, PE frame, PE block, PE can
4. Metal products: aluminum profile, oil filter, car shell, pop-top can, metal can
5. Paper: newspaper, card paper, corrugated paper, copy paper
6. Electronic appliances: refrigerator, circuit board, laptop shell, TV set shell, CD disk
7. Glass

Main characters:
Four shaft shredder is heavy-duty machine. They have advantages in standardization and modularization design, high interchangeability for their components. Their blades are made of special alloy steel with high strength, strong anti-wear and reparability. The drive part takes advantage of 4 motors, heavy planet gear boxes to make main shafts rotate at different speeds. The electric part takes advantage of PLC program and touch screen control with video monitor system and the automatic detecting overload protection function. They have low rotation speed, big torque and low noise characters. So they have won customers’ ept and got popularity in the shredding process in the recycle ept They fit for shredding large and hard objects such as car body, solid industrial waste ,medical waste, e-waste, PE pail, PE frame, PE bottle, metal can, metal pail, intertexture bag, fridge, electric circuit board, paper box, wood and so on.

5. Package Shredder Crusher Machine

6. Pipe Shredder/Granulator

Order flowing process:

Customer requirements →Scheme designed →confirmed by customers →order fixed →manufacturing →trial running in our factory →confirmed by customers →shipped →engineer available overseas →whole life after sales services

Contacts:

RETECH Machinery is an experienced and professional manufacturing for series plastic washing recycling machine/ plastic granulating recycling machine including ET bottle recycling machines, PE PP film recycling machines, plastic PE PP PS ABS PET PC PVC LD HD LLD BOPP granulating line, water treatment for the waste water from washing line, and auxiliary equipment for plastic recycling….
If you are interesting more details of our products, please contact with us no hesitation!

Mob: 0086~13083988828 138581177782-50376571

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

15 worm gear reducer manual Cost China in Ahvaz Iran Years Experience Manufacturing PP PE HDPE PS Double Shaft Shredder with top quality

Good worm gear cutting method factory China in Edinburgh United Kingdom Quality Gearbox Parallel Shaft H Series Gear Units in China with top quality

Good Quality Gearbox Parallel Shaft H Series Gear Units in China

Components:
1. Housing: Cast Iron
2. Gearset: Planetary Gears Set
3. Input Configurations:
Integrated with Electric Motors (50Hz & 60Hz 3 Phrase AC Motors – 4P,6P,8P, DC Motors, Explosion-proof Motors, Hydraulic Motors)
Keyed Solid Shaft Input
4. Output Configurations:
Keyed Cylindrical Solid Shaft Output
Keyed Hollow Shaft Output
Splined Hollow Shaft Output
Models:
HJ – 1 Stage Star Wheel Gearset (Small Teeth Difference Involute Planetary Gear Set)
HN – 1 Stage Star Wheel Gearset Integrated with 1 Stage Planetary Gear Set
HH – 2 Stage Star Wheel Gearset

Features:
1. AOKMAN® H series planetary gear units(star wheel gearboxes) is a new design internal meshing small teeth number difference involute planetary gear transmission mechanism. H series is very ideal for high load and continuous duty
2. Compact structure, high load capacity
3. High efficiency
4. Smooth operation, low noise
5. Large ratio range, intensive gear ratio
6. Modular design, easy to maintain

Parameters:

Types	Sizes	Nominal Ratio	Efficiency
HJ	18B,20B,71B,80B 19B,21B,67B,75B	18~80	≥95%
HN	18B,20B,71B,80B 19B,21B,67B,75B	75~600	≥94%
HH	18B,20B,71B,80B 19B,21B,67B,75B	450~5,000	≥90%

Frame Sizes:
18B,20B,22B,25B,28B,31B,35B,40B,45B,50B,56B,63B,71B,80B
19B,21B,23B,26B,30B,33B,37B,42B,47B,53B,60B,67B,75B
Installation:
Horizontal Mounting
Vertical Mounting
Circular Disc Base Mounting
Lubrication:
Oil Immersion and Splash Lubrication
Forced Lubrication
Cooling:
Natural Cooling
Auxiliary Cooling Devices

Product Pictures:

Our company :
AOKMAN® was founded in 1982, which has more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare parts.
We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with a strong presence in the international market.
AOKMAN® has become a reliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.

Customer visiting:

FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than one hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% ept payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

Welcome to contact us for more detail information and inquiry.
If you have specific parameters and requirement for our gearbox, customization is available.

Good worm gear cutting method factory China in Edinburgh United Kingdom Quality Gearbox Parallel Shaft H Series Gear Units in China with top quality

Good make worm gear drive shop China in Padang Indonesia Performance Gearbox ATA Series Shaft Mounted Gear Reducer with top quality

Good Performance Gearbox ATA Series Shaft Mounted Gear Reducer

Components:

1. Housing: Nodular Cast Iron(Ductile Iron) QT600
2. Gears Profile: Hardened Helical Gears
3. Gears Material: 20CrMnTi
4. Gears Processing: Carburizing, Quenching, Grinding
5. Gears Hardness: Surface Hardness: HRC58-62, Inner Hardness: HBS156-207
6. Gears Accuracy: 6 Class
7. Shafts Material: 40Cr
8. Input Configurations:
Keyed Solid Shaft Input
IEC Normalized Motor Flange
9. Output Configurations:
Keyed Hollow Shaft Output
10. Oil Seal: ZheJiang SOG
11. Bearings: NSK, SKF, HRB, ZWZ, LYC
12. Spare Parts: Torque arm, Optional Backstop

The features of ATA shaft mounted gearbox:
Mounting Type: Tie rod Hanging shaft mounted
Output Shaft: Single key hollow shaft, each model can select three hollow diameter at most.
Gearbox Housing: Hard Iron Steel, can be used outside.
Anti-slip device: Can suit for any model, It’s very convenient to be mounted.

The maintenance of ATA shaft mounted gearbox:
1. Before starting the reducer must be filled of N159 or N220 extreme pressure industrial gear oils, till the gearbox oil shows an intermediate position
2. After three months running, the gearbox need to change oil, attention it must be debris inside the machine rinse before adding new oil.
3. At the reducer hollow shaft ends and drive pulley end gland plate must fastened with loc ept screws.
4. The reducer pulley and the motor pulley must be parallel when they are installed and the belt tightness should be moderate.

Rated Power	1.1~193KW
Intput Speed	500~1400r/min
Output Speed	25~300r/min
Ratio	IN=5.0…31.5
Installation Form	Shaft mounted

The models of ATA shafted mounted gearbox:
1 Stage: ATA30, ATA35, ATA40, ATA45, ATA50, ATA60, ATA70, ATA80, ATA100, ATA125
2 Stage: ATA35D, ATA40D, ATA45D, ATA50D, ATA60D, ATA70D, ATA80D, ATA100D, ATA125D

Gearbox Parameters:

Models	Output Bore Dia.	Maximum Torque	Nominal Ratio(i)
ATA30	30mm	180Nm	5 7 10 12.5 15 20 25 31
ATA35	35mm	420Nm
ATA40	40mm/45mm	950Nm
ATA45	45mm/50mm/55mm	1400Nm
ATA50	50mm/55mm/60mm	2300Nm
ATA60	60mm/70mm	3600Nm
ATA70	70mm/85mm	5100Nm
ATA80	80mm/100mm	7000Nm
ATA100	100mm/125mm	11000Nm
ATA125	125mm/135mm	17000Nm

Product pictures:

Product application:

Our company :
AOKMAN® was founded in 1982, which has more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare parts.
We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with a strong presence in the international market.
AOKMAN® has become a reliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.

Customer visiting:

Our Services:

Pre-sale services	1. Select equipment model.
	2.Design and manufacture products according to clients’ special requirement.
	3.Train technical personal for clients
Services during selling	1.Pre-check and accept products ahead of delivery.
Services during selling	2. Help clients to draft solving plans.
After-sale services	1.Assist clients to prepare for the first construction scheme.
	2. Train the first-line operators.
	3.Take initiative to eliminate the trouble rapidly.
	4. Provide technical exchanging.

FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than one hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% ept payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

If you have any demand for our products please feel free to contact me

Good make worm gear drive shop China in Padang Indonesia Performance Gearbox ATA Series Shaft Mounted Gear Reducer with top quality

Semi-Automatic worm shaft and worm gear near me China in Padova Italy Flatbed Die-Cutter for Corrugated Board My-1200e with top quality

MY E SERIES Semi automatic die-cutting and creasing machine

Specifications:

Model	Unit	MY1200E	MY1300E	MY1500E
Max. Paper Size	mm	1200X780	1300*960	1500X1100
Min. Paper Size	mm	350X350	400*410	500X410
Max. Die-cutting Size	mm	1180X760	1280*940	1480X1080
Max. Speed	sh/h	0-5000	0-4600	0-4000
Max. Wor ept Pressure	T	300	300	300
Max. Paper Thickness	mm	1-7	1-7	1-7
Die-cutting Precision	mm	±0.5	±0.5	±0.5
Total Power	KW	15	15	19
Total Weight	T	12500	14000	17000
Overall Dimension	mm	673040002145	725041002145	770046002205

Features of the machine:

Main Features:

The Bobst type cut structure makes the cutting platform movement like a scissor, it will realize a full and easier cut.
Main worm gear uses alloy copper material, after the experienced operator’s manual scraping treatment and strict standard testing, it can ensures the driving parts 10 years life.
The main chains adopt imported British Renold brand, the differences of 10 chains are less than 0.2mm.
The connect between gear box and driving shaft adopts sleeve and pin structure ensuring a strong connection.
1. Speed:

The machine adopts frequency controller to achieve stepless speed acceleration which can reach to 4500 times per hour. During actual production, it can generally run at 3600 to 4000 times per hour according to the quality of the board. If the quality of the paper is good, a good operator even can operate the machine at 4200 times per hours without feeling too hard.

Safety:

As it is shown in the picture of the machine, the machine adopts rear part paper feeding method which keeps the operator away from the die-cutting part. The mounting and adjustment of the die plate is also done outside of the die-cutting part with sensors and detectors at die-cutting part to ensure that the machine can not be started when the die-cutting plate is at adjustment status.
Besides the sensors at die-cutting part, there are sensor or approach switches at window part to make the whole machine at monitoring status to ensure its safety.

Operation convenience:

There is Man-machine interface installed in the control panel which will shows the safety status of the machine as well as malfunctions to facilitate the operator. Camera is also installed in front of the operator for him/her to monitor the operation status at the delivery part.

Main Structures and Key Material Used
1. Four Main Big Parts:

They are referring to: bottom station, moving platform, upper platform and machine wall. The bottom station is made of gray cast iron -HT 200; the moving platform is ductile iron – QT 42-10 and the machine wall is high quality A3 steel.

Main Drive:

The 11 KW Siemens Motor together with the pneumatic clutch, worm shaft and worm gear forms a moving set to ensure stable pressure out put of not less than 300 tons.

The material for the worm shaft is 40Cr with quenching treatment and gear hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
The bearing that is used is SKF. The bush is copper alloy ZQSn6-6-3.

Die-cutting and Creasing Part:

The drive is transferred via crank rod to pendulum which will bring the moving platform to move up and down to reach die-cut and creasing purpose.
The pendulum is made of high quality ductile iron. The pendulum axis is done by induction harden with surface hardness HRC 43-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 type automatic die-cutting and creasing machine. Compared with automatic die-cutting and creasing machine which is used for cardboard die-cutting, this type of semi-automatic die-cutting and creasing machine is mainly used for corrugated board which needs less pressure for die-cutting, in this case quite some producers have made smaller width on the pendulum and smaller diameter on the pendulum shaft. We keep wider pendulum and bigger diameter on its shaft to make our machine last for a longer life.

The die-cutting plate uses 7 mm 75 Crl plate which has more hardness and life span than the manganese plate.

Board Conveying:

It adopts 3-cam intermittent positioning device to ensure the boarding conveying accurate and stable.
The machine uses gripper bar type with 12A long joints chain which is less in weight and less shock to the intermittent device under the precondition to ensure the strength of the chain. The brand of the chain is Remold U.K with high precise and quality. .
The Gripper bar adopts aviation aluminum with three bridge type- light in weight and high in strength.

Electric Part

The electrical parts are designed and assembled according to the European CE standard and uses world wide known brand products.

Installation of Die

The die mounting and dismounting adopts side withdrawing ways which time saving and easy for operation.
There are two ways for the fixation of the die-either by bolt or clippers which are subject to customer’s advice.
The chase loc ept is pneumatic which is simple, convenient and reliable.

Special Characters of Our Machine:
1. Clever And Special Front Lay Design:

Compared with the card board sheet, the corrugated board has more strength. If the corrugated board abnormally reaches to the front lay, it will damage the front lay and the gripper bar when the front lay reaches to its highest position.
Generally the producers will install sensors on this part to stop the machine when the paper is fed abnormally to the front lay. However, when the machine is running at the high speed, the inertia will bring the machine to run for a while to make the front lay to its highest point and then also damage the front lay and the gripper bar.
Our special design is that when the abnormal board feeding happens and being detected, the front lay can never reaches to its highest point which makes free from front lay and gripper bar damages because of abnormal paper feeding.
As it is our special design, so there is no picture to be shown here.

Optional Delivery Platform:

According to the requirement of the client we can do the delivery platform either square type or E type (as shown in the picture) . If the client has enough pallets, he can choose square type. If the client does have enough pallet, he can choose, E type platform for which will also provide 4 delivery trolleys.

Pneumatic Preloading and Lifting Step Unit:

The preloading device is pneumatic driven. When one paper size is set, when you do other pile of preloading, there is no bother of you to reset the preloading device, you can just press the button and the machine will do for you.
The lifting step unit is also pneumatic to facilitate the conveying of the paper pile.

Dancing Roller Feeding:

Conveying Part:

The board received by the dance roller will go through a conveying part with belt conveying and belt pressing which makes the board being pressed before reaching to the front lay.
Before the board reaches to the front lay, he will be repositioned by the side lay.
By these ways, the board conveyed by the dance roller will be more accurate and stable when they reach to the gripper bar.
There is also detector to detect the status of the board. If board does not come to the front lay at normal position, the detector will send signals to stop the machine.

Configurations:

Name	Brand and Origin	Remarks
Bearing	SKF Swiss	Key part
Bearing	IKO Japan or HangZhou, China	Not key part
Chain	Renold U.K;	Main Chain ( Discrepancy of less than 0.2 mm for per 10 chains of machine chain length)
Chain	CHOHO Japan	Other Chain are Choho Japan
Relay	Omron Japan
Contactor, buttons	TELEMECANIQUE France
Photo Electric Switch	Fotek ZheJiang
Stabilizer	MEANWELL ZheJiang
Variator	Delta ZheJiang
Main Motor	Siemens	Joint Venture
PLC	Delta, ZheJiang
Man-machine Interface	Delta
Pneumatic Parts	Sunrise, ZheJiang
Rotary Joints	SMC Japan
Motor at feeding and delivery	CPG ZheJiang

Semi-Automatic worm shaft and worm gear near me China in Padova Italy Flatbed Die-Cutter for Corrugated Board My-1200e with top quality

Handfed worm shaft nomenclature sales China in Chandigarh India Carton Box Flatbed Die Cutting Machine with Stripping with top quality

Semi-automatic die cutting and creasing machine with stripping unit

1. Specifications:

Model	Unit	MY1200EPA	MY1300EPA	MY1500EPA
Max. Paper Size	mm	1200*780	1300*960	1500*1100
Min. Paper Size	mm	350*350	400*410	500*410
Max. Die-cutting Size	mm	1180*760	1280*940	1480*1080
Max. Speed	sh/h	0-5500	0-5500	0-4500
Max. Wor ept Pressure	T	300	300	300
Max. Paper Thickness	mm	1-7	1-7	1-7
Die-cutting Precision	mm	±0.5	±0.5	±0.5
Total Power	KW	16	16	19
Total Weight	kg	15500	17000	20000
Overall Dimension	mm	728050002350	780051002345	835057002405

2. Features of the machine:
Main Features:

The Bobst type cut structure makes the cutting platform movement like a scissor, it will realize a full and easier cut.
Main worm gear uses alloy copper material, after the experienced operator’s manual scraping treatment and strict standard testing, it can ensures the driving parts 10 years life.
The main chains adopt imported British Renold brand, the differences of 10 chains are less than 0.2mm.
The connect between gear box and driving shaft adopts sleeve and pin structure ensuring a strong connection.
Speed:

The machine adopts frequency controller to achieve stepless speed acceleration which can reach to 4500 times per hour. During actual production, it can generally run at 3800 to 4000 times per hour according to the quality of the board. If the quality of the paper is good, a good operator even can operate the machine at 4200 times per hours without feeling too hard.

Safety:

Operation convenience:

Main Structures and Key Material Used
Four Main Big Parts:

Main Drive:

The 11 KW Siemens Motor together with the pneumatic clutch, worm shaft and worm gear forms a moving set to ensure stable pressure out put of not less than 300 tons.
The material for the worm shaft is 40Cr with quenching treatment and gear hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.

The bearing that is used is SKF. The bush is copper alloy ZQSn6-6-3.

Die-cutting and Creasing Part:

The drive is transferred via crank rod to pendulum which will bring the moving platform to move up and down to reach die-cut and creasing purpose.
The pendulum is made of high quality ductile iron. The pendulum axis is done by induction harden with surface hardness HRC 43-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 type automatic die-cutting and creasing machine. Compared with automatic die-cutting and creasing machine which is used for cardboard die-cutting, this type of semi-automatic die-cutting and creasing machine is mainly used for corrugated board which needs less pressure for die-cutting, in this case quite some producers have made smaller width on the pendulum and smaller diameter on the pendulum shaft. We keep wider pendulum and bigger diameter on its shaft to make our machine last for a longer life.
The die-cutting plate uses 7 mm 75 Crl plate which has more hardness and life span than the manganese plate.

Board Conveying:

It adopts 3-cam intermittent positioning device to ensure the boarding conveying accurate and stable.
The machine uses gripper bar type with 12A long joints chain which is less in weight and less shock to the intermittent device under the precondition to ensure the strength of the chain. The brand of the chain is Renold U.K with high precise and quality. .

The Gripper bar adopts aviation aluminum with three bridge type- light in weight and high

Electric Part

The electrical parts are designed and assembled according to the European CE standard and uses world wide known brand products.

Installation of Die

Special Characters of Our Machine:
Clever And Special Front Lay Design:

Optional Delivery Platform:

Pneumatic Pre-loading and Lifting Step Unit:

The pre-loading device is pneumatic driven. When one paper size is set, when you do other pile of pre-loading, there is no bother of you to reset the pre-loading device, you can just press the button and the machine will do for you.
The lifting step unit is also pneumatic to facilitate the conveying of the paper pile.

Dancing Roller Feeding:

Quite some of the die-cutting machine producers use direct feeding method which is the operator will feed the board directly to the mouth of the gripper. What we have found that the feeding time to the gripper is only 0.3 seconds which makes the board feeding work hard and inaccurate.
Our machine uses an additional dance roller feeding system whose board feeding time can be extend to 0.6 second. Together with the conveying parts it makes an easier work of the operator and faster in efficiency of the machine.
For example: If an operator operates the direct feeding semi-automatic die-cutting machine at 3300 sheets per hour, he can easily operate our machine at 3700 – 4000 sheets per hour.
V. Conveying Part:
The board received by the dance roller will go through a conveying part with belt conveying and belt pressing which makes the board being pressed before reaching to the front lay.
Before the board reaches to the front lay, he will be repositioned by the side lay.
By these ways, the board conveyed by the dance roller will be more accurate and stable when they reach to the gripper bar.
There is also detector to detect the status of the board. If board does not come to the front lay at normal position, the detector will send signals to stop the machine.

Striping Part
Striping is half striping which can strip off three – edge waste of the board.
There are upper chase, middle chase and lower chase where the male, elastic block and female die are placed to strip off the waste.

None-stop Feeding and Delivery

This type of machine has our patented system – non-stop feeding and delivery functions which can reduce the wor ept stress of the operator and increase the wor ept efficiency of the machine

Under this system, the pre-piling is at the side of the operator. The pre-piled board can be transported under the main pile when the main pile is detected short of paper.
At the delivery part, when the board is cut to be about 1 meter, the machine will push the die-cut board pile out of the machine delivery part so that it is easy for the operator to draw them to the designated place without the need of stopping the machine.

Configurations:

Name	Brand and Origin	Remarks
Bearing	SKF Swiss	Key part
Bearing	IKO Japan or HangZhou, China	Not key part
Chain	Renold U.K;	Main Chain ( Discrepancy of less than 0.2 mm for per 10 chains of machine chain length)
Chain	CHOHO Japan	Other Chain are Choho Japan
Relay	Omron Japan
Contractor, buttons	TELEMECANIQUE France
Photo Electric Switch	Fotek ZheJiang
Stabilizer	MEANWELL ZheJiang
Variator	Delta ZheJiang
Main Motor	Siemens	Joint Venture
PLC	Delta, ZheJiang
Man-machine Interface	Delta
Pneumatic Parts	Sunrise, ZheJiang
Rotary Joints	SMC Japan
Motor at feeding and delivery	CPG ZheJiang

Handfed worm shaft nomenclature sales China in Chandigarh India Carton Box Flatbed Die Cutting Machine with Stripping with top quality

12V worm shaft motor shop China in Aguascalientes Mexico 24V 48V Pm DC Gear Motor with Metal Gearbox for Swing Gates with top quality

12v 24v 48v PM DC Gear Motor with Metal Gearbox for Swing Gates

Model:D76L-24v65w-180rpm

Type	small dc gear motor
Motor Diameter	76mm
Voltage	12v 24v 36v 42v 48v
Power	≤150W
Torque	≤20N.M
Speed	≤300RPM
Gear of ratio	75:1 65:1 60:1 47:2 20:1
Gear Modulus	75:1 M=0.8 47:2 M=1.25 65:1 60:1 20:1 M=1
Material of gear	Plastic / brass
OEM/ODM Service	Accept
Usage	Hydraulic pump ,electric forklift ,vending machine, blender machine,pig feed mixing,porridge feeder,welding machine,garage door opener,electric tools .

HangZhou ept Science & Technology Co.,Ltd is a subsidiary of HangZhou ept Motor Co.,Ltd.The factory is located in Xihu (West Lake) Dis.,HangZhou,we can design and manufacture of motors according to all our customers’ demands so far,we can manufacture about 60,000 motors per month.

Our main market:

Europe,America and Asia,including United Kingdom, Germany, Italy, France, Sweden, United State,Brazil,India,Korea and so on.

Company Advantages:

1. Big production capacity, fast delivery.

2. Strict QC inspecting rules: all products must be 100% inspected before delivery.

3. OEM/ODM services are available

4. 24 hours online service.

5. Prompt quotation for your inquiry

6. Quality,reliability and long product life.

7. Professional manufacturer offers competitive price.

8. Diversified rich experienced skilled workers.

More Applications:

Car simulator ,garage door opener ,gate operator, par ept lock,wheelchair ,electric vehicle ,water pump ,oil pump,vending machine,sewing machine, coffee machine,industrial machine,floor polisher,truck lift,stair lift,hospital bed ,hydraulic pump electric forklift.

RFQ:

Q: Are you ept company or manufacturer ?

A: We are Integration of ept and trade, with over 20 years experience in DC worm gear motor. Our company have accumulated skilled production line, complete management and powerful research support, which could match all of the customers’ requirements and make them satisfaction.

Q: What is your main product?

–DC Motor: Gear motor, Square motor, Stepped motor, and Micro motor
-Welding equipment: Wire feeder, Welding rod, Welding Torch, Earth clamp, Electrode holder, and Rectifier

Q: What if I don’t know which DC motor I need?

A: Don’t worry, Send as much information as you can, our team will help you find the right one you are loo ept for.

Q: What is your terms of payment ?

A: Payment=1000USD, 30% T/T in ept ,balance before shippment.
If you have another question, pls feel free to contact us as below:

Q: How to delivery:

A: By sea – Buyer appoint forwarder, or our sales team find suitable forwarder for buyers.

By air – Buyer offer collect express account, or our sales team find suitable express for buyers. (Mostly for sample)
Others – Actually,samples send by DHL,UPS, TNT and Fedex etc. We arrange to delivery goods to some place from China appointed by buyers.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

12V worm shaft motor shop China in Aguascalientes Mexico 24V 48V Pm DC Gear Motor with Metal Gearbox for Swing Gates with top quality

Bwd worm gearbox with hollow output shaft factory China in Soshanguve South Africa Cyclo-Drive Gearboxes Cycloidal Pin Gear Reducer with top quality

We are manufacturer and exporter of Worm gear speed reducer, helical gear speed reducer, worm helical gear speed reducer, speed variator, cyclo-drive gearboxes, couplings, door/gate operators.

BWD

Appearance and installation dimension

(mm)

Frame	Centre height	Installationdimension								Shaft end dimension
		A₁	A₀	B₁	B₀	h	s	Hole		Output shaft				Intput shaft
		A₁	A₀	B₁	B₀	h	s	n	d₀	d₁	b₁	c₁	l₁	d₂	b₂	c₂	l₂
09	80	17	76	30	120	12	M8	4	11	22	6	24.5	30	15	5	17	25
10	100	58	90	35	150	14			11	30	8	33	35	15	5	17	22
11	120	69	110	55	240	16			16	35	10	38	56	18	6	20.5	35
12	140	73	150	60	280	20	M10		16	45	14	48.5	71	22	6	24.5	40
13	160	78	200	75	340	25	M12		17	55	16	59	80	30	8	33	55
14	200	53	320	90	340	25	M12		22	70	20	74.5	102	35	10	38	60
15	240	39	380	90	420	32	M16		22	90	25	95	120	45	14	48.5	70
16	290	45	480	80	560	35	M20		26	100	28	106	140	50		53.5	82
16A	280	45	440	80	500	35			26	100	28	106	140	50		53.5	82
17	325	80	500	120	630	40			30	120	32	127	165	55	16	59	100
18	420	122	330×2	160	800	50	2-M20	6	32	140	36	148	210	70	20	74.5	120

(mm)

Frame	Outerside dimension								Weight kg
	A	B	H	D	Double Shaft style	Flange style
	A	B	H	D	L	L₁	L₂	B₂
09	100	144	160	140	203	142	According to motor size		6.5
10	120	185	184	168	215	155			14
11	160	280	240	200	269	191			29
12	200	320	275	240	340	255			45
13	250	390	356	300	409	294			80
14	380	400	425	340	487	369			135
15	440	470	529	430	581	440			210
16	560	620	614	500	676	443			400
16A	520	560	614	500	724	443			400
17	600	690	706	580	795	639			660
18	810	880	883	710	1030	819			1180

Company Profile

l The largest manufacturer and exporter of worm gear reducers in Asia.

l Established in 1976, we transformed from a county owned factory to private one in 1996. HangZhou ept POWER TRANSMISSION EQUIPMENT CO.,LTD is our new name since 2001.

l We are the first manufacturer of reducers and gearboxes in China who was given export license since year 1993.

l “Fixedstar” brand gearboxes and reducers are the first owner of CHINA TOP BRAND and Most Famous Trade Mark for reducers.

First to achieve ISO9001 and CE Certificate among all manufacturers of gearboxes in China.

As a professional manufacturer of worm gearbox and worm gear reducers in China, we mainly produce reduction gearbox,aluminum case worm gearboxes,arc gear cylindrical worm gearboxes, worm gear reducers, in line helical gearboxes, and cyclo drive reducers, etc. These products feature rational structure, stable performance, and reliable quality, and so on. They are widely used in power, mining, metallurgy, building material, chemical, food, printing, ceramic, paper-making, tobacco, and other industries.

We have 600 workers in our factory, which covers 70,000 square meters in HangZhou. We have been ma ept 2,500 units of reducers everyday since 2012. We are proudly exporting 70% of our products to more than 40 countries all over the word. Our customers come from Italy, Germany, USA, Canada, Spain, UK, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries in the world. 30% of them are OEM made for direct manufacturers of other products.

We warmly welcome customers from other parts of the world to visit us. Seeing is believing. We are very confident that after visiting our facility, you will have confidence on our products. We have the latest automatic equipments and experienced workers to ensure the stable quality and large output. We have the most sophisticated technical and engineering team to support most demanding requirement on standard and OEM products.

Loo ept ept to meeting you in HangZhou, China.

Bwd worm gearbox with hollow output shaft factory China in Soshanguve South Africa Cyclo-Drive Gearboxes Cycloidal Pin Gear Reducer with top quality

Helical gear ratio of a worm gear Custom China in Samara Russian Federation Gear Bevel Worm Spur Gear Crown Pinion Plastic Box Differential Coupling Shaft Planetary Rack Timing Metal Solid Spiral Ring with top quality

Helical gear ratio of a worm gear Custom China in Samara Russian Federation Gear Bevel Worm Spur Gear Crown Pinion Plastic Box Differential Coupling Shaft Planetary Rack Timing Metal Solid Spiral Ring with top quality

Helical Gear Bevel Worm Spur Gear Crown Pinion Plastic Box Differential Coupling Shaft Planetary Rack Timing Metal Solid Spiral Ring

Nmrv+Nmrv worm wheel and worm shaft Cheap China in Marrakech Morocco Series 030-040 Worm Gear Speed Reducer with High Quality with top quality

We started our business from 1995 and now we are the one of the leader manufacturer of power transmission products. It focuses mainly on Keyless Loc ept Devices, Timing Belt Pulleys, Roller Chains, Bearing, Jaw Couplings, Gears and other parts.

These products are produced in conformity with the International Standard and the standards adopted in industrialized countries (DIN ANSI BS JIS) with up to data equipment, advanced technology and perfect management system for quality control. It boasts a team with rich experience in this industry, focusing on global market. So the products are of good quality with competitive prices.

Our goal : Offering first-class products and service to our customers and business partners.

Nmrv+Nmrv worm wheel and worm shaft Cheap China in Marrakech Morocco Series 030-040 Worm Gear Speed Reducer with High Quality with top quality

Wpedka ironman by grove gear Custom China in La Laguna Mexico Type of Worm Gear Reducer with Hollow Output Shaft with top quality

Type:	WP series Double-stage Speed Reducer-Iron Worm Gear Box
Model:	WPEDKA40-70,50-80,60-100,70-120,80-135,80-147,100-155,120-175,135-200,155-250
Brand name:	YBANG
Color:	Blue/Green or on request
Ratio:	200-900
Mounting Position:	Foot mounted, flange mounted
Output Form:	Solid shaft, hollow shaft
Bearing:	C&U, NSK, SKF or specified
Seal:	CTY, CFW, SKF or specified
Origin:	ZHangZhoug, China
Warranty:	1 year
Product features:	It adopts American technology with durability, stable transmission, large carrying capacity, low noise, compact structure, large transmission ratio and wide power.
Application areas:	Textile printing and dyeing, rubber and plastic machinery, building materials machinery, environment protection machinery, lifting machinery, food packaging, metallurgical machinery, petrochemical industry, stage machinery and new energy field.

Features of WP worm reducer

WP reducer model:

1.Single speed reducer: WPA, WPS, WPO, WPX,WPDA,WPDS,WPDO,WPDX,WPKA,WPKS,

WPDKA, WPDKS

2. Universal speed reducer:WPW, WPWA, WPWS, WPWO, WPWX, WPWT, WPWV, WPWD,

WPWDS, WPWDO, WPWDX, WPWDT, WPWDV, WPWK, WPWKA,

WPWKS, WPWKO, WPWKT, WPWKV, WPWDK, WPWDKA,

WPWDKO, WPWDKT, WPWDKV, WPDKZ WPDZ.

3.Double speed reducer: WPEA,WPEDA,WPES,WPEDS,WPEO,WPEDO,WPWEKO,WPWEDKO,WPWEK,

WPWEDK, WPEKA,WPEDKA,WPEKS,WPEDKS,WPWE,WPWED,WPEX,WPEDX

4. Multistage speed reducer: WPEEDA,WPEEO.

WP reducer Sizes: 40, 50, 60, 70, 80, 100, 120, 135, 155, 175, 200,250

Gearing arrangement is worm

Motor power is up to 33KW

Mounting position: foot mounted and flange mounted

Ratio Reduction: 1) single speed reducer: 10-60. 2) double speed reducer: 200-900

3) universal speed reducer: 10-60

Material: iron casting

Color: blue or green

Inner packing by carton, outer packing by wooden case.

(1) With excellent quality and Reasonable price

(2) Promise to delivery on time

(3) Safe, reliable, economical and durable

(4) Stable transmission, quiet operation

(5) High heat-radiating efficiency, high carrying ability

(6) Every product must be tested before sending

FAQ

Q: Are you ept company or manufacturer?

A: We are manufacturer.

Q: How long is your delivery time?

A: Generally it is 5-7 days after the goods are produced. or it is 10-15 days if the goods are large in quantity.

Q: Do you provid samples?

A: Yes, we could offer the sample if you order more than 50 sets, but we don’t pay for the freight. And the fee will be return after the transaction’s finishing.

Q: What information shall we give before placing a purchase order?

A: You just need to offer the size of the dimensions of the worm shaft and the ratio.

Wpedka ironman by grove gear Custom China in La Laguna Mexico Type of Worm Gear Reducer with Hollow Output Shaft with top quality

worm-shaft

[email protected]

Tag Archives: China worm shaft

15 worm gear reducer manual Cost China in Ahvaz Iran Years Experience Manufacturing PP PE HDPE PS Double Shaft Shredder with top quality

Good worm gear cutting method factory China in Edinburgh United Kingdom Quality Gearbox Parallel Shaft H Series Gear Units in China with top quality

Good make worm gear drive shop China in Padang Indonesia Performance Gearbox ATA Series Shaft Mounted Gear Reducer with top quality

Components:

Semi-Automatic worm shaft and worm gear near me China in Padova Italy Flatbed Die-Cutter for Corrugated Board My-1200e with top quality

Handfed worm shaft nomenclature sales China in Chandigarh India Carton Box Flatbed Die Cutting Machine with Stripping with top quality

12V worm shaft motor shop China in Aguascalientes Mexico 24V 48V Pm DC Gear Motor with Metal Gearbox for Swing Gates with top quality

Q: Are you ept company or manufacturer ?

Q: What is your main product?

Q: What if I don’t know which DC motor I need?

Q: What is your terms of payment ?

Bwd worm gearbox with hollow output shaft factory China in Soshanguve South Africa Cyclo-Drive Gearboxes Cycloidal Pin Gear Reducer with top quality

Helical gear ratio of a worm gear Custom China in Samara Russian Federation Gear Bevel Worm Spur Gear Crown Pinion Plastic Box Differential Coupling Shaft Planetary Rack Timing Metal Solid Spiral Ring with top quality

Nmrv+Nmrv worm wheel and worm shaft Cheap China in Marrakech Morocco Series 030-040 Worm Gear Speed Reducer with High Quality with top quality

Wpedka ironman by grove gear Custom China in La Laguna Mexico Type of Worm Gear Reducer with Hollow Output Shaft with top quality