Tag Archives: worm gear drive shaft

Good make worm gear drive shop China in Padang Indonesia Performance Gearbox ATA Series Shaft Mounted Gear Reducer with top quality

Good make worm gear drive shop China in Padang Indonesia Performance Gearbox ATA Series Shaft Mounted Gear Reducer with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

Good Performance Gearbox ATA Series Shaft Mounted Gear Reducer

Components:

1. Housing: Nodular Cast Iron(Ductile Iron) QT600
2. Gears Profile: Hardened Helical Gears
3. Gears Material: 20CrMnTi
4. Gears Processing: Carburizing, Quenching, Grinding
5. Gears Hardness: Surface Hardness: HRC58-62, Inner Hardness: HBS156-207
6. Gears Accuracy: 6 Class
7. Shafts Material: 40Cr
8. Input Configurations:
Keyed Solid Shaft Input
IEC Normalized Motor Flange
9. Output Configurations:
Keyed Hollow Shaft Output
10. Oil Seal: ZheJiang SOG
11. Bearings: NSK, SKF, HRB, ZWZ, LYC
12. Spare Parts: Torque arm, Optional Backstop

The features of ATA shaft mounted gearbox:
Mounting Type: Tie rod Hanging shaft mounted
Output Shaft: Single key hollow shaft, each model can select three hollow diameter at most.
Gearbox Housing: Hard Iron Steel, can be used outside.
Anti-slip device: Can suit for any model, It’s very convenient to be mounted.

The maintenance of ATA shaft mounted gearbox:
1. Before starting the reducer must be filled of N159 or N220 extreme pressure industrial gear oils, till the gearbox oil shows an intermediate position
2. After three months running, the gearbox need to change oil, attention it must be debris inside the machine rinse before adding new oil.
3. At the reducer hollow shaft ends and drive pulley end gland plate must fastened with loc ept screws.
4. The reducer pulley and the motor pulley must be parallel when they are installed and the belt tightness should be moderate.
 

Rated Power
 		 1.1~193KW
Intput Speed
 		 500~1400r/min
Output Speed
 		 25~300r/min
Ratio
 		 IN=5.0…31.5
Installation Form
 		 Shaft mounted

The models of ATA shafted mounted gearbox:
1 Stage: ATA30, ATA35, ATA40, ATA45, ATA50, ATA60, ATA70, ATA80, ATA100, ATA125
2 Stage: ATA35D, ATA40D, ATA45D, ATA50D, ATA60D, ATA70D, ATA80D, ATA100D, ATA125D

Gearbox Parameters:

Models Output Bore Dia. Maximum Torque Nominal Ratio(i)
ATA30 30mm 180Nm 5

7

10

12.5

15

20

25

31
ATA35 35mm 420Nm
ATA40 40mm/45mm 950Nm
ATA45 45mm/50mm/55mm 1400Nm
ATA50 50mm/55mm/60mm 2300Nm
ATA60 60mm/70mm 3600Nm
ATA70 70mm/85mm 5100Nm
ATA80 80mm/100mm 7000Nm
ATA100 100mm/125mm 11000Nm
ATA125 125mm/135mm 17000Nm

 

Product pictures:

Product application:

Our company :
AOKMAN® was founded in 1982, which has more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare parts.
We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with a strong presence in the international market.
AOKMAN® has become a reliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.

Customer visiting:

Our Services:

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than one hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% ept payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

If you have any demand for our products please feel free to contact me

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Good make worm gear drive shop China in Padang Indonesia Performance Gearbox ATA Series Shaft Mounted Gear Reducer with top quality

Good make worm gear drive shop China in Padang Indonesia Performance Gearbox ATA Series Shaft Mounted Gear Reducer with top quality

RV compact worm gear drive Cost China in Jodhpur India Reducer From EPT Transmission with Shaft Input Worm with top quality

RV compact worm gear drive Cost China in Jodhpur India Reducer From EPT Transmission with Shaft Input Worm with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

PRODUCT INTRODUCTION:
MAIN FEATURES:
1) Made of high quality aluminum alloy, light weight and non-rusting
2) Large output torque and high radiating efficiency 3) Smooth running and low noise, can work long time in dreadful condition
4) Good-loo ept appearance, durable service life and small volume
5) Suitable for omnibearing installation
MAIN MATERIALS:
1)housing: aluminium alloy ADC12(size 571-090); die cast iron HT200(size 110-150);
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1

PRODUCT PARAMETERS:

SIZE Specification transmission ratio
IEC N M P 7.5 10 15 20 25 30 40 50 60 80 100
D
30 63B5 95 115 140 11 11 11 11 11 11 11 11      
63B14 60 75 90
56B5 80 100 120 9 9 9 9 9 9 9 9 9 9  
56B14 50 65 80 9 9 9 9 9 9 9 9 9 9
40 71B5 110 130 160 14 14 14 14 14 14 14 14      
71B14 70 85 105
63B5 95 115 140 11 11 11 11 11 11 11 11 11 11 11
63B14 60 75 90
56B5 80 100 120               9 9 9 9
50 80B5 130 165 200 19 19 19 19 19 19 19 – – – –
80B14 80 100 120
71B5 110 130 160 14 14 14 14 14 14 14 14 14 14 –
71B14 70 85 105
63B5 95 115 140 – – – – – – – 11 11 11 11
63 90B5 130 165 200 24 24 24 24 24 24 24 – – – –
90B14 95 115 140
80B5 130 165 200 19 19 19 19 19 19 19 19 19 19 –
80B14 80 100 120
71B5 110 130 160 – – – – – – 14 14 14 14 14
71B14 70 85 105
75 100/112B5 180 215 250 28 28 28 – – – – – – – –
100/112B14 110 130 160
90B5 130 165 200 24 24 24 24 24 24 24       –
90B14 95 115 140
80B5 130 165 200       19 19 19 19 19 19 19 19
80B14 80 100 120
71B5 110 130 160               14 14 14 14
90 100/112B5 180 215 250 28 28 28 28 28 28 – – – – –
100/112B14 110 130 160
90B5 130 165 200 24 24 24 24 24 24 24 24 24   –
90B14 95 115 140
80B5 130 165 200             19 19 19 19 19
80B14 80 100 120
110 132B5 230 265 300 38 38 38 38         – – –
100/112B5 180 215 250 28 28 28 28 28 28 28 28 28    
100/112B14 110 130 160
90B5 130 165 200         24 24 24 24 24 24 24
80B5 130 165 200                   19 19
130 132B5 230 265 300 38 38 38 38 38 38 38   – – –
100/112B5 180 215 250         28 28 28 28 28 28 28
100/112B14 110 130 160
90B5 130 165 200                   24 24
150 160B5 250 300 350 42 42 42 42 42 – – – – – –
132B5 230 265 300       38 38 38 38 38 38    
100/112B5 180 215 250               28 28 28 28

PRODUCT OUTLINE DIMENSIONS:

COMPANY BRIEF INTRODUCTION:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our leading products is  full range of RV571-150 worm reducers , also supplied hypoid helical gearbox, PC units, UDL Variators and AC Motors.
Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.
With fast delivery, superior after-sales service, advanced producing facility, our products sell well  both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and the Middle East and so on.Our aim is to develop and innovate on the basis of high quality, and create a good reputation for reducers.

 WORKSHOP:

EXHIBITIONS:




FAQ:
1.Q:Can you make as per customer drawing?
   A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
   A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a  ept company or manufacturer?
   A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
   A:8000-9000 PCS/MONTH
4.Q:What is your MOQ?
   A: 1 pcs
5.Q:Free sample is available or not?
   A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
   A:Yes, we have CE certificate and SGS certificate report.
Contact information:
Ms Lingel Pan
 
 
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

RV compact worm gear drive Cost China in Jodhpur India Reducer From EPT Transmission with Shaft Input Worm with top quality

RV compact worm gear drive Cost China in Jodhpur India Reducer From EPT Transmission with Shaft Input Worm with top quality