Tag Archives: helical worm

China Shaft Mounted Gearbox S Series Helical Worm Gearbox double worm gearbox

Product Description

 

Product Description

 

Product Description

-S Collection Helical gearbox
 

 

Merchandise Attributes
one.Higher modular style.
2.Integrated casting housing,compact dimension,substantial loading support, stable transmitting and reduced sounds degree.
3.With the special equipment geometry, it gets higher torque, efficiency and lengthy daily life circle.
four.It can achieve the direct combination for 2 sets of gearbox.
5.Large effectiveness and conserve electricity.

6.Preserve expense and lower routine maintenance.

 

Solution Parameters

one. Technical data

Measurement 38 48 58 68 78 88 98
Composition BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) .eighteen~.seventy five .eighteen~1.five .18~three .25~5.5 .fifty five~7.5 .75~15 one.5~22
Ratio ten.27~one hundred sixty five.seventy one 11.46~244.seventy four 10.78~196.21 eleven.55~227.20 9.96~241.09 eleven.83~223.26 twelve.seventy five~230.forty eight
Permissible Torque(N.m) 90 one hundred seventy three hundred 520 1270 2280 4000
Bodyweight(kg) 7 ten 14 26 50 100 one hundred seventy

two: Design and style choice
 

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Limited-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

 

Supplies Information Sheet

Housing material

Grey Solid iron

Housing hardness

HBS163~255

Equipment materials

20CrMnTi alloy metal

Area hardness of gears

HRC58°~sixty two °

Gear main hardness

HRC33~forty eight

Input / Output shaft materials

40Cr alloy metal

Enter / Output shaft hardness

HRC32~36

Machining precision of gears

precise grinding, 6~5 Grade

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Warmth therapy

tempering, cementiting, quenching, normalizing, and so on.

Performance

94%~96% (depends on the transmission phase)

Noise (MAX)

sixty~68dB

Temp. rise (MAX)

40°C

Temp. increase (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Manufacturer of bearings

China best brand name bearing, HRB/LYC/ZWZ/C&U. Or other makes asked for, SKF, FAG, INA, NSK.

Manufacturer of oil seal

NAK — ZheJiang or other brand names asked for

 

Thorough Pictures

 

 

Our procedure of manufacturing

 

 

Our item line

 

 

Firm Profile

 

Firm Profile

Bode  was established in 2007, which is located in HangZhou city, ZHangZhoug province. As 1 expert producer and exporter, we have more than 17 years’ expertise in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare parts. We have manufacturing unit with superior production and examination products, the robust advancement of crew and making capacity provide our buyers with high top quality items. Our goods widely served to various industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, drugs, picket and so on. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to inquire us any questions, good provide always for you for extended term enterprise.

FAQ

Q1: Are you investing firm or producer?
A: We are factory.

Q2: What varieties of gearbox can you make for us?
A: Primary items of our firm: R, S, K, F sequence helical-tooth reducer, RV sequence worm equipment reducer,H Sequence Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as for every custom drawing?
A: Of course, we supply tailored support for buyers.

This fall: Can we purchase 1 pc of each and every product for quality screening?
A: Sure, we are happy to settle for trial buy for top quality screening.

Q5: What info shall we give ahead of positioning a purchase buy?
A:  a) Variety of the gearbox, ratio, input and output variety, input flange, mounting placement, and motor informationetc.
     b) Housing coloration.
     c) Obtain amount.
     d) Other special specifications.

Q6: How prolonged is your shipping and delivery time?
A: Normally it is 5-ten times if the goods are in stock. or it is fifteen-20 days if the merchandise are not in stock.

Q7: What is your conditions of payment ?
A: thirty% Progress payment by T/T following signing the deal.70% prior to shipping and delivery

If you are fascinated in our merchandise, welcome to make contact with with us.
Our crew will do our very best to meet your need 🙂 
 

 

US $90-5,500
/ Piece
| 		1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Size 38 48 58 68 78 88 98
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested
US $90-5,500
/ Piece
| 		1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Size 38 48 58 68 78 88 98
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.<brworm reducer

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
worm reducer

Applications

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China Shaft Mounted Gearbox S Series Helical Worm Gearbox double worm gearboxChina Shaft Mounted Gearbox S Series Helical Worm Gearbox double worm gearbox
editor by czh 2023-01-20

China S Series Helical Worm Gear Box for Packing Machine with high quality

Product Description

 

Merchandise Description

 

Solution Description

-S Collection Helical gearbox
 

 

Product Functions
1.Substantial modular design.
two.Integrated casting housing,compact dimension,high loading assistance, secure transmitting and lower sounds amount.
three.With the specific equipment geometry, it receives substantial torque, efficiency and prolonged lifestyle circle.
4.It can obtain the immediate mixture for 2 sets of gearbox.
5.Large efficiency and conserve electricity.

six.Preserve price and minimal routine maintenance.

 

Merchandise Parameters

one. Technical data

Dimensions 38 48 fifty eight 68 seventy eight 88 ninety eight
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) .eighteen~.seventy five .18~1.five .18~3 .twenty five~5.five .fifty five~7.five .seventy five~15 one.5~22
Ratio ten.27~one hundred sixty five.seventy one eleven.46~244.74 ten.seventy eight~196.21 eleven.fifty five~227.twenty 9.96~241.09 eleven.eighty three~223.26 12.seventy five~230.forty eight
Permissible Torque(N.m) 90 a hundred and seventy three hundred 520 1270 2280 4000
Fat(kg) 7 10 14 26 fifty one hundred a hundred and seventy

2: Layout selection
 

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Limited-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

 

Resources Data Sheet

Housing material

Grey Forged iron

Housing hardness

HBS163~255

Equipment content

20CrMnTi alloy metal

Surface area hardness of gears

HRC58°~62 °

Equipment main hardness

HRC33~48

Input / Output shaft substance

40Cr alloy steel

Input / Output shaft hardness

HRC32~36

Machining precision of gears

correct grinding, 6~5 Quality

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Warmth remedy

tempering, cementiting, quenching, normalizing, and many others.

Effectiveness

ninety four%~96% (relies upon on the transmission phase)

Sounds (MAX)

sixty~68dB

Temp. increase (MAX)

40°C

Temp. increase (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Manufacturer of bearings

China best manufacturer bearing, HRB/LYC/ZWZ/C&U. Or other brand names asked for, SKF, FAG, INA, NSK.

Model of oil seal

NAK — ZheJiang or other manufacturers requested

 

Thorough Photographs

 

 

Our approach of generation

 

 

Our merchandise line

 

 

Firm Profile

 

Organization Profile

Bode  was launched in 2007, which is situated in HangZhou town, ZHangZhoug province. As 1 specialist manufacturer and exporter, we have more than seventeen years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare areas. We have factory with advanced creation and test products, the robust development of staff and creating capacity offer you our buyers with higher high quality products. Our merchandise widely served to a variety of industries of Metallurgy, Substances, lifting, mining, Petroleum, textile, drugs, wood and so forth. Main marketplaces: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to request us any questions, excellent provide always for you for lengthy expression organization.

FAQ

Q1: Are you investing business or producer?
A: We are factory.

Q2: What kinds of gearbox can you generate for us?
A: Main products of our company: R, S, K, F collection helical-tooth reducer, RV sequence worm equipment reducer,H Sequence Parallel Shaft Helical Reduction Equipment Box

Q3: Can you make as for every personalized drawing?
A: Sure, we provide tailored services for consumers.

This fall: Can we get 1 laptop of each merchandise for high quality screening?
A: Of course, we are glad to settle for demo order for good quality screening.

Q5: What data shall we give just before placing a obtain get?
A:  a) Sort of the gearbox, ratio, enter and output variety, enter flange, mounting situation, and motor informationetc.
     b) Housing coloration.
     c) Acquire quantity.
     d) Other special requirements.

Q6: How lengthy is your delivery time?
A: Usually it is 5-ten times if the merchandise are in stock. or it is fifteen-20 times if the products are not in stock.

Q7: What is your terms of payment ?
A: 30% Advance payment by T/T following signing the deal.70% ahead of shipping

If you are intrigued in our solution, welcome to speak to with us.
Our staff will do our greatest to meet your need 🙂 
 

 

US $90-5,500
/ Piece
| 		1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Size 38 48 58 68 78 88 98
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested
US $90-5,500
/ Piece
| 		1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Size 38 48 58 68 78 88 98
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.<brworm reducer

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
worm reducer

Applications

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China S Series Helical Worm Gear Box for Packing Machine with high quality China S Series Helical Worm Gear Box for Packing Machine with high quality
editor by czh 2023-01-16

China Manufacturer Best Prices Used Widely Worm Gear Reduction Gearbox for Motorcycle helical worm gearbox

Solution Description

Solution Description

Product Parameters

Packaging & Delivery

Business Profile

To Be Negotiated 1 Piece
(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Soft Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Stepless

###

Customization:
Available

|

Customized Request

To Be Negotiated 1 Piece
(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Soft Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Stepless

###

Customization:
Available

|

Customized Request

What is a worm gear reducer gearbox?

The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
worm reducerHollow shaft worm gear reducer gearbox

Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear

The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm reducerDouble throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
worm reducerBrass worm gear

Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China Manufacturer Best Prices Used Widely Worm Gear Reduction Gearbox for Motorcycle helical worm gearboxChina Manufacturer Best Prices Used Widely Worm Gear Reduction Gearbox for Motorcycle helical worm gearbox
editor by czh 2023-01-06

China China Manufacturer S Series Helical Worm gearbox helical worm gearbox

Merchandise Description

S sequence Helical- Worm Geared Reducer with Motor

one. Merchandise characteristics

one.1. S series: right-angle pace reduction gearing composed by helical gears, worms, and gears, optimized and made in accordance to international standard
 
one.2.Higher precision, higher effectiveness, good classification in transmission ratio, vast assortment, big transmission torque, trustworthy efficiency, lower noise, adaptable installation, and handy use and servicing.
 
1.3. They are commonly utilized in numerous reduced-velocity transmissions, which are standard basic parts of mechanical transmission. 

2. Technical parameters

Housing material                                     Cast iron
Housing hardness HBS90-240
Gear substance: 20CrMnTi
Floor hardnesss  of gear     HRC58°-62°
Equipment core hardness HRC33°-40°
Enter/Output shaft material           40CrMnTi
Input/Output shaft hardness HBS241°-286°
Shaft at oil seal postion hardness HRC48 ° -55 °
Machining precision of gears  material Exact grinding 6-5 grade
Warmth remedy tempering, cementing, quenching and many others
Efficiency up to 90%
Noise(Max) 60-68dB
Device design Foot mounted,flange mounted,hollow shaft mounted
Input approach flange enter,inline enter,shaft enter
Vibration ≤ 20um
Backlash ≤ 20Arcmin
Bearing brands NSK,C&U and so on
Oil seal makes NAK,SKF and so forth
Lubricant VG680
Motor IP55, F class
Motor shaft 40Cr, Tempering, cementing,quenching and so forth.

3.Applications

HangZhou XG Transmission Gearbox reducer are broadly utilized in :
Ceramic Sector
Glass Industry
Foods Sector
Metallurgy Industry
Beer& Drink Business
Printing and dyeing Industry
Textile Industry
Warehouse Logoistics Industry
Wooden working Machinery
environmental security equipment Business
Leather-based Market
Pharmacy Market
 
five.Company Data

 
ZheJiang CZPT Co.,Ltd,the predecessor was a state-owned army CZPT business, was recognized in 1965. CZPT specializes in the comprehensive electrical power transmission solution for large-stop products producing industries primarily based on the aim of “System Merchandise, Software Design and Specialist Service”.

Starshine have a strong technological drive with in excess of 350 staff at present, like over thirty engineering experts, thirty high quality inspectors, covering an spot of 80000 sq. meters and kinds of superior processing machines and screening equipments. We have a good foundation for the market application growth and provider of higher-conclude speed reducers & variators owning to the provincial engineering engineering investigation middle,the lab of equipment pace reducers, and the base of contemporary R&D.

Our principal merchandise are R/S/K/F sequence helical geared motor, SNP sequence planetary gearboxes, SNKG series bevel-helical gearmotor, NCJ series gear motor, RV collection worm gearboxes, JWB-X sequence velocity variators, B/JXJ collection cycloidal gearboxes, XGK sequence helical-hypoid Gearboxes, which widely employed in ceramic business, glass sector, woodworking equipment , high voltage change, foods & beverage, packaging & printing, Storage & logistics, hoisting & transportation facilities…etc , and CZPT technically give the skilled item & service for the medium and high-stop consumers, and our gearboxes are ideal-selling in domestic, and even in overseas , such as in Europe, North The us, South The united states, Center East, South Asia, Southeast Asia, Africa…etc.

 In the future , Starshine will maintain the creed of “serving buyer, diligence & simplicity, self-criticism, innovation, honesty, teamwork”, and the idea of “top quality produces benefit” to target on the customers’ specifications and give them the competitive transmission resolution and produce value for them continually, and make a high-stop equipment manufacturing market and develop a preferred model of replacing import products and upgrading constantly for the conclude consumers.

Among Dynamic and Static, Easy is Extraordinary, let’s go ahead hand in hand and make a brilliant future!

Our factory 
1. three hundred sets sophisticated processing equipment

2. “6S”Standardized Management

Our Team 

Technological Team

Income Crew

Right after Income Team

Exibition Demonstrate 

2019 ASIA ceramics exhibition

2018 Globe of Industry Exhibition

Quality Assurance
 
Products 100% check before supply

Handed ISO 9001: 2015 Certificate.

 
Our Certificates:
Handed ” ISO 9001 Global Top quality System Certificate”, “Worldwide Top quality Credit score AAA++ Ceritifacte” ,  ” Swiss SGS Certification”, Legendary Brand name in Chinese Electromechanical Industry”, “Well-known Brand name of ZheJiang Province”, “Non-community Scientific and Technological Enterprise in ZheJiang Province”, “Countrywide Large and New-tech Company”, “Top fifty in Chinese Equipment Business” “2011 HangZhou Engineering and Technological R&D Heart” and so on.

Our services

one. We provide twelve months Warranty.
2. We have hundreds of gearbox reducers. From Input Power .06KW to 200KW, Ratio 1.3-289.seventy four, Output speed -1095rpm and Output torque 1.4-62800Nm. They can meet up with your all diverse demands for different industries.
3. 24 several hours on-line provider.
four. Fast delivry. 
five. We provide E-catalog or Paper catalog,so you can select the design simply in accordance to your requirements 
6. Welcome you arrive to our manufacturing unit to examine our goods, we can help you to guide the lodge or ticket.

FAQ
 
Q:Are you a trading  company or manufacturer?
A: We are producer.

Q:Exactly where do you foundation?
A: We are in Xihu (West Lake) Dis. district, HangZhou, China.

Q:What sorts of gearbox can you produce for us?
A: R/S/K/F sequence helical geared motor, SNP sequence planetary gearboxes, SNKG collection bevel-helical gearmotor, NCJ sequence gear motor, RV sequence worm gearboxes, JWB-X sequence velocity variators, B/JXJ sequence cycloidal gearboxes, XGK collection helical-hypoid Gearboxes

Q:What are the application of the gearbox?
A:Goods are broadly used in ceramic, glass, foodstuff, metallurgy, beer & drink, printing and dyeing, textile, petrochemical engineering, warehouse logistics, wood-doing work device, environmental defense products, printing and packaging, pharmacy, and leather-based. Products are offered in some nations around the world and locations, such as Europe, America, and Southeast Asia, and it possesses dozens of distributors and after-sale services agents.

Q:What is the content you use?

A1: Aluminum Housing entire body ( For the RV collection worm gearbox Dimensions thirty~90)
   
A2: Cast iron(For the RV sequence worm gearbox, Measurement one hundred ten-one hundred fifty, For the NCJ  & F/R/S/K sequence helical equipment reducer)

Any inquiry pls speak to:
Nicola Huang (Export product sales)
 
 
Internet site: gearbox1965

US $102.56-908.3
/ Piece
| 		2 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step

###

Customization:
Available

|

Customized Request

###

Housing material                                     Cast iron
Housing hardness HBS90-240
Gear material: 20CrMnTi
Surface hardnesss  of gear     HRC58°-62°
Gear core hardness HRC33°-40°
Input/Output shaft material           40CrMnTi
Input/Output shaft hardness HBS241°-286°
Shaft at oil seal postion hardness HRC48 ° -55 °
Machining precision of gears  material Accurate grinding 6-5 grade
Heat treatment tempering, cementing, quenching etc
Efficiency up to 90%
Noise(Max) 60-68dB
Unit model Foot mounted,flange mounted,hollow shaft mounted
Input method flange input,inline input,shaft input
Vibration ≤ 20um
Backlash ≤ 20Arcmin
Bearing brands NSK,C&U etc
Oil seal brands NAK,SKF etc
Lubricant VG680
Motor IP55, F class
Motor shaft 40Cr, Tempering, cementing,quenching etc.
US $102.56-908.3
/ Piece
| 		2 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step

###

Customization:
Available

|

Customized Request

###

Housing material                                     Cast iron
Housing hardness HBS90-240
Gear material: 20CrMnTi
Surface hardnesss  of gear     HRC58°-62°
Gear core hardness HRC33°-40°
Input/Output shaft material           40CrMnTi
Input/Output shaft hardness HBS241°-286°
Shaft at oil seal postion hardness HRC48 ° -55 °
Machining precision of gears  material Accurate grinding 6-5 grade
Heat treatment tempering, cementing, quenching etc
Efficiency up to 90%
Noise(Max) 60-68dB
Unit model Foot mounted,flange mounted,hollow shaft mounted
Input method flange input,inline input,shaft input
Vibration ≤ 20um
Backlash ≤ 20Arcmin
Bearing brands NSK,C&U etc
Oil seal brands NAK,SKF etc
Lubricant VG680
Motor IP55, F class
Motor shaft 40Cr, Tempering, cementing,quenching etc.

What is a worm gear reducer gearbox?

A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
worm reducer

Hollow shaft worm gear reducer gearbox

The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
worm reducer

Self-locking function

One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
worm reducer

Size of worm gear reducer gearbox

Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

China China Manufacturer S Series Helical Worm gearbox helical worm gearboxChina China Manufacturer S Series Helical Worm gearbox helical worm gearbox
editor by czh 2023-01-01

China Speed Reducer Gearbox Worm Gear Drive Jack Worm Agricultural Industrial Planetary Helical Bevel Worm Steering Gear Motor Highquantity Nmrv Speed Reducer Gearbox with Best Sales

Solution Description

Speed Reducer Gearbox Worm Gear Push Jack Worm Agricultural Industrial Planetary Helical Bevel Worm Steering Gear Motor HighQuantity Nmrv Velocity Reducer Gearbox

The reducer is mainly composed of transmission areas (gear or worm), shaft, bearing, scenario and its equipment.

The cupboard is an important ingredient of the reducer. It is the foundation of the transmission parts and must have adequate power and rigidity.

The box is usually made of grey solid iron, and a forged steel box can also be utilized for heavy-duty or shock-damped equipment models. In order to simplify the approach and lessen the price of the reducer developed by the one device, a steel plate welded box can be utilised.

 

US $10-99
/ Piece
| 		100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Stepless

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

US $10-99
/ Piece
| 		100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Stepless

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

What is a worm gear reducer gearbox?

The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
worm reducerHollow shaft worm gear reducer gearbox

Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear

The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm reducerDouble throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
worm reducerBrass worm gear

Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China Speed Reducer Gearbox Worm Gear Drive Jack Worm Agricultural Industrial Planetary Helical Bevel Worm Steering Gear Motor Highquantity Nmrv Speed Reducer Gearbox with Best Sales China Speed Reducer Gearbox Worm Gear Drive Jack Worm Agricultural Industrial Planetary Helical Bevel Worm Steering Gear Motor Highquantity Nmrv Speed Reducer Gearbox with Best Sales
editor by czh 2022-12-19

China Nmrv 050 Gearbox Gear Box Wheel Speed Reducer Jack Worm Planetary Helical Bevel Steering Gear Drive Worm Manufacturer Industrial Worm Nmrv 050 Gearbox wholesaler

Merchandise Description

NMRV 050 Gearbox Equipment Box Wheel Velocity Reducer Jack Worm Planetary Helical Bevel Steering Gear Generate Worm Maker Industrial Worm NMRV 050 Gearbox

     

      

US $10-99
/ Piece
| 		100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Steel

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

US $10-99
/ Piece
| 		100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Steel

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

A-Drive PWC single worm reducer

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducers. As a result, worm gears continue to be popular with engineers.
worm_reducer

Agknx driver

Conical drive worm reducers are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducers are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm Reducer Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducers are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducers are ideal for a variety of applications.
RV series worm gear reducer is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducers have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducers are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
worm_reducerAGknx Single

Worm reducers can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducers work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducers have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducers can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducers are also susceptible to thermal stress. They run hotter than hypoid reducers, which reduces their useful life. In addition to higher heat, worm reducers can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
worm_reducerAGknx X & H

The AGknx X & H worm gear reducer series is a high-performance universal mount worm gear reducer. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

China Nmrv 050 Gearbox Gear Box Wheel Speed Reducer Jack Worm Planetary Helical Bevel Steering Gear Drive Worm Manufacturer Industrial Worm Nmrv 050 Gearbox wholesaler China Nmrv 050 Gearbox Gear Box Wheel Speed Reducer Jack Worm Planetary Helical Bevel Steering Gear Drive Worm Manufacturer Industrial Worm Nmrv 050 Gearbox wholesaler
editor by czh 2022-12-02

China High Precision Helical Worm Speed Reducer Gear Motor Gearbox wholesaler

Merchandise Description

High Precision Helical Worm Speed Reducer Gear Motor Gearbox
 

Input Configurations

Direct motor coupled

With IEC B5/B14 motor flange

With IEC B5/B14 motor mounted

With reliable enter shaft

Output Configurations

 

Solid output shaft

Sound output shaft with flange

Hollow output shaft

Hollow output shaft with flange

Variants of the Helical Worm Gear Unit Series S / SF / SA / SAF

Foot- or flange-mounted

B5 or B14 flange-mounted

Solid shaft or hollow shaft

Hollow shaft with keyed link, shrink disk, splined hollow shaft, or Torque Arm

Primary Characteristic

The easy style tends to make for price-performance.  Use the S collection equipment units to implement simple jobs in your device or plant applications. The linear electrical power transmission makes the helical-worm gear units particularly tranquil in operation. The combination with a helical equipment phase significantly boosts the efficiency in comparison to pure worm equipment models.

Specification

Product

Shaft Dia.

mm

Horizontal Middle Height mm

External Flange Dia.

 mm

Energy

(kw)

Ratio

(i)

Nominal Torque

(Nm)

Sound Shaft

Hollow Shaft

S/SF/SA/SAF37

ф20

ф20

88

  

.twelve-.fifty five

24-204

one hundred

S/SF/SA/SAF47

ф25

ф30 / ф25

100

160

.18-.75

24-204

one hundred fifty

S/SF/SA/SAF57

ф30

ф35 / ф30

112

two hundred

.seventy five-1.five

24-204

250

S/SF/SA/SAF67

ф35

ф45 /ф40

140

200

.75-3

24-285

460

S/SF/SA/SAF77

ф45

ф60 / ф50

one hundred eighty

250

.75-7.5

24-385

1200

S/SF/SA/SAF87

ф60

ф70 / ф60

225

350

1.1-eleven

24-389

2000

S/SF/SA/SAF97

ф70

ф90 / ф70

280

450

1.5-eighteen.five

24-389

3500

Company profile

Scenario

Packing

FAQ

Q1: I want to get your goods, how can I pay?
A: You can pay out via T/T(thirty%+70%), L/C ,D/P etc. 

Q2: How can you guarantee the quality?
A: 1 year’s warranty towards B/L date. If you satisfy with high quality issue, please ship us photos or video clip to examine, we assure to ship spare areas or new items to exchange. Our ensure not incorporate inappropriate procedure or incorrect specification choice. 

Q3: How we decide on models and technical specs?
A: You can electronic mail us the collection code (for instance: RC series helical gearbox) as well as necessity information, this kind of as motor energy,output velocity or ratio, provider factor or your software…as a lot info as possible. If you can supply some pictures or drawings,it is wonderful. 

This fall: If we don’t discover what we want on your website, what should we do?
A: We offer you 3 possibilities:
one, You can electronic mail us the images, drawings or descriptions specifics. We will consider to design your products on the basis of our
regular designs.
2, Our R&D department is expert for OEM/ODM items by drawing/samples, you can send us samples, we do personalized layout for your bulk buying.
3, We can build new items if they have great market. We have previously created numerous things for specific making use of productive, this sort of as unique gearbox for agitator, cement conveyor, shoes equipment and so on. 

Q5: Can we get 1 laptop of each product for high quality testing?
A: Yes, we are happy to accept trial get for top quality screening.

Q6: How about your solution delivery time?
A: Usually for 20’container, it normally takes twenty five-thirty workdays for RV series worm gearbox, 35-forty workdays for helical gearmotors.

US $40-200
/ Piece
| 		5 Pieces

(Min. Order)

###

Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: M1-M6
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step

###

Customization:
Available

|

Customized Request

###

Input Configurations
Direct motor coupled
With IEC B5/B14 motor flange
With IEC B5/B14 motor mounted
With solid input shaft
Output Configurations
 
Solid output shaft
Solid output shaft with flange
Hollow output shaft
Hollow output shaft with flange
Variants of the Helical Worm Gear Unit Series S / SF / SA / SAF
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid shaft or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

###

Model
Shaft Dia.
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
Solid Shaft
Hollow Shaft
S/SF/SA/SAF37
ф20
ф20
88
  
0.12-0.55
24-204
100
S/SF/SA/SAF47
ф25
ф30 / ф25
100
160
0.18-0.75
24-204
150
S/SF/SA/SAF57
ф30
ф35 / ф30
112
200
0.75-1.5
24-204
250
S/SF/SA/SAF67
ф35
ф45 /ф40
140
200
0.75-3
24-285
460
S/SF/SA/SAF77
ф45
ф60 / ф50
180
250
0.75-7.5
24-385
1200
S/SF/SA/SAF87
ф60
ф70 / ф60
225
350
1.1-11
24-389
2000
S/SF/SA/SAF97
ф70
ф90 / ф70
280
450
1.5-18.5
24-389
3500
US $40-200
/ Piece
| 		5 Pieces

(Min. Order)

###

Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: M1-M6
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step

###

Customization:
Available

|

Customized Request

###

Input Configurations
Direct motor coupled
With IEC B5/B14 motor flange
With IEC B5/B14 motor mounted
With solid input shaft
Output Configurations
 
Solid output shaft
Solid output shaft with flange
Hollow output shaft
Hollow output shaft with flange
Variants of the Helical Worm Gear Unit Series S / SF / SA / SAF
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid shaft or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

###

Model
Shaft Dia.
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
Solid Shaft
Hollow Shaft
S/SF/SA/SAF37
ф20
ф20
88
  
0.12-0.55
24-204
100
S/SF/SA/SAF47
ф25
ф30 / ф25
100
160
0.18-0.75
24-204
150
S/SF/SA/SAF57
ф30
ф35 / ф30
112
200
0.75-1.5
24-204
250
S/SF/SA/SAF67
ф35
ф45 /ф40
140
200
0.75-3
24-285
460
S/SF/SA/SAF77
ф45
ф60 / ф50
180
250
0.75-7.5
24-385
1200
S/SF/SA/SAF87
ф60
ф70 / ф60
225
350
1.1-11
24-389
2000
S/SF/SA/SAF97
ф70
ф90 / ф70
280
450
1.5-18.5
24-389
3500

What is a worm gear reducer?

The worm gear reducer is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
worm_reducerHollow shaft worm gear reducer

Worm gear reducer is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducers are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducers are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer is the multi-stage variety. This gear reducer has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer has low noise, low vibration and low energy consumption.
Worm gear reducers offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducers that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer has the characteristics of lower price and better torque output.
hourglass worm gear

The hourglass type worm gear reducer has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the hourglass worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The hourglass worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducers are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer stems from Sumitomo Heavy Industries’ extensive experience in gear reducers. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Hourglass worm gear reducers are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm_reducerDouble throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer is the same as that of the traditional worm gear reducer. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducers are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducers with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducers are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer is designed for low to medium-horsepower applications. This gear reducer is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducers.
worm_reducerBrass worm gear

Brass worm gear reducer is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer also has the ability to generate high torque. However, it is important to understand that this gear reducer has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China High Precision Helical Worm Speed Reducer Gear Motor Gearbox wholesaler China High Precision Helical Worm Speed Reducer Gear Motor Gearbox wholesaler
editor by czh 2022-11-29

China Nmrv Series Worm Gearbox helical worm gearbox

Item Description

 

Detailed Photographs

 

 

 

Product Description

Factors:
1. Housing: Die-cast Aluminium Alloy Gearbox (RV571~RV090)Cast Iron Gearbox (RV110~RV150)
two. Worm Wheel: Wearable Tin Bronze Alloy, Aluminum Bronze Alloy
3. Worm Shaft: 20Cr Steel, carburizing, quenching, grinding, surface hardness 56-62HRC, .3-.5mm remaining carburized
layer soon after specific grinding
4. Enter Configurations:
Equipped with Electrical Motors (AC Motor, Brake Motor, DC Motor, Servo Motor)
IEC-normalized Motor Flange
Sound Shaft Input
Worm Shaft Tail Extension Input
5. Output Configurations:
Keyed Hollow Shaft Output
Hollow Shaft with Output Flange
Plug-in Solid Shaft Output

Versions:
Hollow Shaft Input with IEC-normalized Motor Flange
RV571~RV150
Strong Shaft Enter
RV571~RV150

 

Item Parameters

Specialized Data

Types

Rated Electricity

Rated
Ratio

Enter Gap
Dia.

Enter Shaft
Dia.

Output Hole
Dia.

Output Shaft
Dia.

RV571

.06KW~.12KW

5~sixty

Φ9

Φ9

Φ11

Φ11

RV030

.06KW~.25KW

5~eighty

Φ9(Φ11)

Φ9

Φ14

Φ14

RV040

.09KW~.55KW

five~one hundred

Φ9(Φ11,Φ14)

Φ11

Φ18(Φ19)

Φ18

RV050

.12KW~1.5KW

five~one hundred

Φ11(Φ14,Φ19)

Φ14

Φ25(Φ24)

Φ25

RV063

.18KW~2.2KW

seven.5~100

Φ14(Φ19,Φ24)

Φ19

Φ25(Φ28)

Φ25

RV075

.25KW~4.0KW

7.5~a hundred

Φ14(Φ19,Φ24,Φ28)

Φ24

Φ28(Φ35)

Φ28

RV090

.37KW~4.0KW

seven.5~a hundred

Φ19(Φ24,Φ28)

Φ24

Φ35(Φ38)

Φ35

RV110

.55KW~7.5KW

seven.5~a hundred

Φ19(Φ24,Φ28,Φ38)

Φ28

Φ42

Φ42

RV130

.75KW~7.5KW

seven.5~a hundred

Φ24(Φ28,Φ38)

Φ30

Φ45

Φ45

RV150

two.2KW~15KW

7.5~one hundred

Φ28(Φ38,Φ42)

Φ35

Φ50

Φ50

Ratio: 5, 7.5, ten, 15, 20, 25, 30, forty, 50, sixty, 80, 100
Set up:
Flange Mounted
Foot Mounted
Torque Arm Mounted
Lubrication:
Grease Lubrication
Oil-bathtub and Splash Lubrication
Cooling:
Natural Cooling

Certifications

 

 

 

Company Profile

Xihu (West Lake) Dis.ng Transmission Gear Co., Ltd. situated HangZhou town, ZHangZhoug, as 1 specialist company
and exporter of cycloidal pin wheel reducer,worm reducer, gear reducer, gearbox , AC motor and relative spare
parts, owns abundant expertise in this line for several years.

We are 1 immediate factory, with advanced generation products, the sturdy development staff and making
potential to offer you quality products for consumers.

Our goods broadly served to a variety of industries of Metallurgy, Substances, lifting,mining,Petroleum,textile,drugs,wood etc. Principal markets: China, Africa,Australia,Vietnam, Turkey,
Japan, Korea, Philippines…

Welcome to inquire us any inquiries, good offer always for you for long phrase enterprise.

FAQ

 

Q: Are you trading company or producer?
A: We are manufacturing facility.
 

Q: How long is your supply time?
A: Typically it is 5-ten times if the merchandise are in inventory. or it is 15-20 times if the merchandise are not in inventory.
 

Q: Can we buy 1 personal computer of every single item for good quality testing?
A: Sure, we are happy to acknowledge trial get for good quality tests.

Q:How to select a gearbox which satisfies your prerequisite?
A:You can refer to our catalogue to decide on the gearbox or we can help to select when you offer
the technical info of necessary output torque, output velocity and motor parameter and so on.

Q: What data shall we give just before putting a obtain order?
A:a) Sort of the gearbox, ratio, enter and output type, enter flange, mounting situation, and motor informationetc.
b) Housing colour.
c) Obtain quantity.
d) Other specific needs.

US $17-200
/ Unit
| 		1 Unit

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Step: Single-Step
Type: Gear Reducer

###

Models
Rated Power
Rated
Ratio
Input Hole
Dia.
Input Shaft
Dia.
Output Hole
Dia.
Output Shaft
Dia.
RV025
0.06KW~0.12KW
5~60
Φ9
Φ9
Φ11
Φ11
RV030
0.06KW~0.25KW
5~80
Φ9(Φ11)
Φ9
Φ14
Φ14
RV040
0.09KW~0.55KW
5~100
Φ9(Φ11,Φ14)
Φ11
Φ18(Φ19)
Φ18
RV050
0.12KW~1.5KW
5~100
Φ11(Φ14,Φ19)
Φ14
Φ25(Φ24)
Φ25
RV063
0.18KW~2.2KW
7.5~100
Φ14(Φ19,Φ24)
Φ19
Φ25(Φ28)
Φ25
RV075
0.25KW~4.0KW
7.5~100
Φ14(Φ19,Φ24,Φ28)
Φ24
Φ28(Φ35)
Φ28
RV090
0.37KW~4.0KW
7.5~100
Φ19(Φ24,Φ28)
Φ24
Φ35(Φ38)
Φ35
RV110
0.55KW~7.5KW
7.5~100
Φ19(Φ24,Φ28,Φ38)
Φ28
Φ42
Φ42
RV130
0.75KW~7.5KW
7.5~100
Φ24(Φ28,Φ38)
Φ30
Φ45
Φ45
RV150
2.2KW~15KW
7.5~100
Φ28(Φ38,Φ42)
Φ35
Φ50
Φ50
US $17-200
/ Unit
| 		1 Unit

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Step: Single-Step
Type: Gear Reducer

###

Models
Rated Power
Rated
Ratio
Input Hole
Dia.
Input Shaft
Dia.
Output Hole
Dia.
Output Shaft
Dia.
RV025
0.06KW~0.12KW
5~60
Φ9
Φ9
Φ11
Φ11
RV030
0.06KW~0.25KW
5~80
Φ9(Φ11)
Φ9
Φ14
Φ14
RV040
0.09KW~0.55KW
5~100
Φ9(Φ11,Φ14)
Φ11
Φ18(Φ19)
Φ18
RV050
0.12KW~1.5KW
5~100
Φ11(Φ14,Φ19)
Φ14
Φ25(Φ24)
Φ25
RV063
0.18KW~2.2KW
7.5~100
Φ14(Φ19,Φ24)
Φ19
Φ25(Φ28)
Φ25
RV075
0.25KW~4.0KW
7.5~100
Φ14(Φ19,Φ24,Φ28)
Φ24
Φ28(Φ35)
Φ28
RV090
0.37KW~4.0KW
7.5~100
Φ19(Φ24,Φ28)
Φ24
Φ35(Φ38)
Φ35
RV110
0.55KW~7.5KW
7.5~100
Φ19(Φ24,Φ28,Φ38)
Φ28
Φ42
Φ42
RV130
0.75KW~7.5KW
7.5~100
Φ24(Φ28,Φ38)
Φ30
Φ45
Φ45
RV150
2.2KW~15KW
7.5~100
Φ28(Φ38,Φ42)
Φ35
Φ50
Φ50

Worm Reducer – What You Need to Know

When shopping for a Worm Reducer, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducers and the applications that they can be used for. This will help you choose the right unit for your application.
worm_reducer

Features

Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducers also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.

Functions

Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer to function properly.Another important feature of a worm reducer is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.

Applications

This market report analyzes the Worm Reducer market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm Reducer market.
The major regional markets for the Worm Reducer include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
worm_reducer

Cost

Cost is an important consideration when selecting a worm reducer. The initial cost of a worm gear reducer is considerably lower than other types of gear reducers. Worm gear reducers are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer.Stainless steel worm gear reducers from WorldWide Electric offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducers are available in stock from all six of WorldWide Electric’s regional warehouses. They also come with free prepaid freight.Worm gear reducers are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducers are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.

aspect

Worm reducers vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer should be selected according to the specific application.The worm gear reducer saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducers are common. Many gear manufacturers have large stocks of these gear reducers. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer for your application. In addition, the worm gear reducer is easy to install and maintain.
worm_reducer

Worm gear reducer oil

Worm gear reducers usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducers are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducers require less frequent oil changes than other types of gear reducers. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.

China Nmrv Series Worm Gearbox helical worm gearboxChina Nmrv Series Worm Gearbox helical worm gearbox
editor by czh 2022-11-27

China supplier LIFEI motor worm types of motors electrical engineering gear motor gearbox helical gear motorreductor worm gearbox back drive

Warranty: 1 calendar year, 12months
Relevant Industries: Garment Retailers, Building Content Outlets, Production Plant, Equipment Fix Stores, Foods & Beverage Manufacturing facility, Farms, Property Use, Retail, Printing Stores, Building works , Energy & Mining, packing machine, meals process, carry, crane, agitat
Custom-made help: OEM, ODM, OBM
Gearing Arrangement: Helical
Output Torque: up to eighteen pace reducers and over thirty years of knowledge, we will be your spouse, supplying the greatest stage of technological routine maintenance for the performance and durability of your products.
Extremely skilled service engineers are obtainable 24 several hours a working day
Shortest lead time.
Warranty time period :12 months

FAQ

Q: Are you a investing company or a factory?
A: we are A factory.
Q: how lengthy is your shipping and delivery time?
A: if we have inventory, it normally will take 5-ten days, or 15-twenty days not to have inventory.
Q: can we acquire 1 for quality screening?
A: Indeed,we are glad to accept A demo buy for high quality tests.
Q: what are your terms of payment?
A:Payment=1000 USD ,thirty% T/T in advance,balance just before shippment.

if you have one more concern,Please truly feel totally free to speak to me.

Advantages and disadvantages of worm gear reducer

If you are looking for a worm gear reducer, you have come to the right place. This article will cover the pros and cons of worm gear reducers and discuss the different types available. You will learn about multi-head worm gear reducers, hollow shaft worm gear reducers as well as hypoid gear sets and motors.
worm_reducer

Hollow shaft worm gear reducer

Hollow shaft worm gear reducers are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducers depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducers are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducers are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducers, there are also helical gear reducers. These reducers can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer is that it is more efficient than a single-stage gear reducer. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducers are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.

Multi-head worm gear reducer

The multi-head worm gear reducer is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducers have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducers are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
worm_reducer

Hypoid Gear Set

Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.

Hypoid gear motor

A hypoid gear motor is a good choice for a worm gear reducer as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer can provide the same output as a 1/2 hp motor driving a worm reducer. A study by Nissei compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducers run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.

R series worm gear reducer

R series worm gear reducers have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
worm_reducer

AGKNX Electric Worm Gear Reducer

AGKNX Electric worm gear reducers are available with NEMA C-face mounting flanges for a variety of motors. These reducers feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducers are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducers are one of the most cost-effective and compact gears. These reducers increase output torque while reducing input speed. AGKNX Electric’s worm gear reducers are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducers have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
China supplier LIFEI motor worm types of motors electrical engineering gear motor gearbox helical gear motorreductor worm gearbox back driveChina supplier LIFEI motor worm types of motors electrical engineering gear motor gearbox helical gear motorreductor worm gearbox back drive

China Best Sales S Series Helical Worm Gear Reducer near me shop

Item Description

SC Transmission F sequence

                     S Collection Helical Worm Gear Reducer with Hollow Shaft

 

Product:37~97

Ratio:6.8~288

Input energy: 0.twelve~22kW

Output torque:eleven~4900N.m

 

 

one.1. S series: appropriate-angle velocity reduction gearing composed by helical gears, worms, and gears, optimized and designed in accordance to intercontinental regular
 
1.2.Higher precision, large efficiency, fantastic classification in transmission ratio, vast range, large transmission torque, reputable overall performance, low sounds, flexible installation, and hassle-free use and maintenance.
 
one.3. They are broadly utilised in a variety of low-velocity transmissions, which are basic basic areas of mechanical transmission. 
 

 

 

 

 

Housing material                                     Cast iron
Housing hardness HBS90-240
Gear material: 20CrMnTi
Surface hardnesss of gear     HRC58°-62°
Gear core hardness HRC33°-40°
Input/Output shaft material          . 40CrMnTi
Input/Output shaft hardness HBS241°-286°
Shaft at oil seal postion hardness HRC48 ° -55 °
Machining precision of gears  material Accurate grinding 6-5 grade
Heat treatment tempering, cementing, quenching etc
Efficiency up to 90%
Noise(Max) 60-68dB
Unit model Foot mounted,flange mounted,hollow shaft mounted
Input method flange input,inline input,shaft input
Vibration ≤ 20um
Backlash ≤ 20Arcmin
Bearing brands NSK,C&U etc
Oil seal brands NAK,SKF etc
Lubricant VG680
Motor IP55, F class
Motor shaft 40Cr, Tempering, cementing,quenching etc.
Housing material                                     Cast iron
Housing hardness HBS90-240
Gear material: 20CrMnTi
Surface hardnesss of gear     HRC58°-62°
Gear core hardness HRC33°-40°
Input/Output shaft material          . 40CrMnTi
Input/Output shaft hardness HBS241°-286°
Shaft at oil seal postion hardness HRC48 ° -55 °
Machining precision of gears  material Accurate grinding 6-5 grade
Heat treatment tempering, cementing, quenching etc
Efficiency up to 90%
Noise(Max) 60-68dB
Unit model Foot mounted,flange mounted,hollow shaft mounted
Input method flange input,inline input,shaft input
Vibration ≤ 20um
Backlash ≤ 20Arcmin
Bearing brands NSK,C&U etc
Oil seal brands NAK,SKF etc
Lubricant VG680
Motor IP55, F class
Motor shaft 40Cr, Tempering, cementing,quenching etc.

Worm gear reducer

Cheaper than planetary gearboxes In many cases, worm gear reducers are a popular alternative to planetary gearboxes. A worm gear reducer is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducers are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.
worm_reducer

pocket

The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer to reduce vibration without damaging the output shaft.
Compact worm gear reducers are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.

high efficiency

High-efficiency worm gear reducers are ideal for applications that require precision, repeatability, and efficient performance. These reducers are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducers through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducers are more efficient than their counterparts.
The high-efficiency worm reducer is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducers include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducers can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.
worm_reducer

low clearance

A low-clearance worm reducer is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducers can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.

quieter

The quieter worm reducer is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducers are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducers are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducers are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducers can be upgraded to improve their performance by combining with other gear trains or gearboxes.
worm_reducer

easy to replace

An easily replaceable worm gear reducer can save you a lot of money. A worm gear reducer is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducers can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducers offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducers is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducers are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer for your equipment.
When replacing the worm gear reducer, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.

Worm Reducer l1Worm Reducer l2