Tag Archives: motovario worm gear motor

W11 motovario worm gear motor Cheap China in Brussels Belgium EPT al 3 Roller Plate Rolling Machine with top quality

W11 motovario worm gear motor Cheap China in Brussels Belgium EPT al 3 Roller Plate Rolling Machine with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

Mechanical Symmetrical 3 Roller Plate Bending Machine

1. The whole structure of Mechanical Plate Rolling machine:
1). The machine adopts 3-roller symmetrical structure with the upper roller moving vertically in the center between the two lower rollers, which is achieved through the drive of the screw, the unt, the worm and the lead screw.
2). The two lower rollers rotates, and provides the plate materials with torque through the engagement of the output gear of the moderator with the gear of the lower rollers.
3). Adapted for bending metal plate into round, arc, and so on. Its wor ept principle is rotary bending deformation. This product is widely used in chemical industry, Cement, shipbuilding, boiler, aviation, water control project, Power Transmission Tower, metal structure and the ept of ma ept machinery.

2. The Feature of Mechanical Plate Rolling machine:
1). The machine adopts 3-roller asymmetrical structure with the upper roller as the main drive and the lower roller ma ept vertical movement so as to clamp the plate materials tight. The machine drive comes from the engagement between the gear of the lower roller and the gear of the upper roller.
2). The machine is the most precise 3-roll machine in its category. The RGS design reduces to a minimum the distance between the bending points guaranteeing higher bending accuracy.
3). The Ultra wide roll support with lubrication circuit is mounted within linear slides to prevent wear and tear.
4). The very high rotation power is a guarantee of the Machine superior rolling torque and speed, available without loss of energy as all three rolls are driven independently by Gear and gearboxes directly coupled to the rolls shafts.

3. Major parts of the manufacturing process:
1). Wor ept rollers: Cast steel ingot (chemical composition analysis): Check performance-forging roughcast – Forging annealing-UT flaw – Roughing (mechanical tests)-heat treatment (hardening and tempering) – UT flaw – Semi finishing – Finishing – MT
2). Large forgings: Cylinder body, gear, gear shaft forging roughcast – Surface inspection roughing – UT flaw – UT flaw detector heat treatment – Finishing semi- Finishing – MT
3). Welding structure: Racks, chassis, wheel box Plate into the factory (chemical composition analysis, mechanical properties test) – Pretreatment – For sheet metal cutting-welding-seam UT or RT flaw – Annealing treatment – Roughing-finishing- Vibration destressing- Hot blasting – Finishing
5-4 Major parts of the manufacturing process.

Technical Parameters                  
Specifications Model Thickness Maximum width Yield limit Coil velocity Loaded with minimum diameter On the roll diameter Under the roll diameter Under the roll center distance Main Motor Power Overall Size (LxWxH)
(mm) (mm) (MPa) (m/min) (mm) (mm) (mm) (mm) (kw) (mm)
W11-6×1500 6 1500 245 7.16 380 180 170 210 4 3300x1200x1340
W11-6×2000 6 2000 245 7.16 380 180 170 210 5.5 3300x1210x1340
W11-6×2500 6 2500 245 7.16 500 190 170 260 5.5 4300x1210x1340
W11-6×3200 6 3200 245 6.46 500 240 200 310 7.5 5200x1400x1200
W11-8×2000 8 2000 245 7.16 450 190 170 260 7.5 3800x1220x1340
W11-8×2500 8 2500 245 6.46 500 240 200 310 11 4500x1420x1620
W11-12×2000 12 2000 245 6.46 500 240 200 310 11 4060x1420x1620
W11-12×2500 12 2500 245 5 750 280 240 360 11 5000x1550x1320
W11-12×3000 12 3000 245 5 650 280 240 360 11 5500x1550x1320
W11-16×2000 16 2500 245 5 750 280 240 360 11 4500x1550x1320
W11-16×2500 16 2500 245 5 750 330 240 360 11 5000x1550x1320
W11-16×3000 16 3000 245 5 900 340 280 440 11 6300x1650x1950
W11-20×2000 20 2000 245 5 750 280 240 440 11 4500x1530x1320
W11-20×2500 20 2500 245 5 850 340 280 490 15 5600x1630x1920
W11-25×2000 25 2000 245 5 850 340 280 490 22 5100x1630x1920
W11-25×2500 25 2500 245 4.5 900 380 300 600 30 6000x4600x2160
W11-30×2000 30 2000 245 4.5 900 380 300 600 30 5500x1470x2160
W11-30×2500 30 2500 245 4.3 1100 460 380 600 37 6900x2300x2850
W11-30×3000 30 3000 245 5 1200 480 400 600 37 7400x2300x2650
W11-30×3200 30 3200 245 5 1200 500 400 600 37 7600x2300x2650

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

W11 motovario worm gear motor Cheap China in Brussels Belgium EPT al 3 Roller Plate Rolling Machine with top quality

W11 motovario worm gear motor Cheap China in Brussels Belgium EPT al 3 Roller Plate Rolling Machine with top quality

Nmrv nmrv 030 motovario Custom China in Zahedan Iran Worm Wheel Gear Motor Transmission Gear with top quality

Nmrv nmrv 030 motovario Custom China in Zahedan Iran Worm Wheel Gear Motor Transmission Gear with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

Product Introduction:

FCNDK series reducer is a new-generation of products developed by our factory on the basis of introducing foreign advanced technology,its’ main features are as follows:

1 Made of high quality aluminum alloy, light weight and non-rusting
2 Large output torque and high radiating efficiency
3 Smooth running and low noise
4 Good-loo ept appearance, durable service life and small volume
5 Suitable for omnibearing installation

 

FCNDK

Size
 		  A
 		  B
 		  C
 		  D(H7)
 		  D1(J6)
 		  E
 		  F
 		  G
 		  G1
 		 G2 
 		  H
 		  I
 		  L
 		  M
 		  N(h8)
 		  N1
 		  O
 		  P
 		  Q
 		 R 
 
 30
 		  54
 		  20
 		  80
 		  14
 		  9
 		 97 
 		 32
 		 55
 		 63
 		 51
 		 40
 		 30
 		 56
 		 65
 		 55
 		 29
 		 6.5
 		 75
 		 44
 		 57
 
 40
 		  70
 		  23
 		  100
 		  18(19)
 		  11
 		 121.5 
 		 43 
 		 70 
 		 78
 		 60
 		 50
 		 40
 		 71
 		 75
 		 60
 		 36.5
 		 6.5
 		 87
 		 55
 		 71.5
 
 50
 		  80
 		  30
 		  120
 		  25(24)
 		  14
 		 144 
 		 49 
 		 80
 		 92
 		 74
 		 60
 		 50
 		 85
 		 85
 		 70
 		 43.5
 		 8.5
 		  100
 		 64
 		 84
 
 63
 		  100
 		  40
 		  144
 		  25(28)
 		  19
 		  174
 		 67
 		 95
 		 112
 		 90
 		 72
 		 63
 		 103
 		 95
 		 80
 		 53
 		 8.5
 		 110
 		 80
 		 102
 
 75
 		  120
 		  50
 		  172
 		  28(35)
 		  24
 		  205
 		 72
 		 112.5
 		 120
 		 105
 		 86
 		 75
 		 112
 		 115
 		 95
 		 57
 		 11
 		 140
 		 93
 		 119
 
 90
 		  140
 		  50
 		  208
 		  35(38)
 		 24
 		 238 
 		 74 
 		 129.5
 		 140
 		 125
 		 103
 		 90
 		 130
 		 130
 		 110
 		 67
 		 13
 		 160
 		 102
 		 135
 
 110
 		  170
 		  60
 		  252.5
 		  42
 		  28
 		  295
 		 – 
 		 160
 		 155
 		 142
 		 127.5
 		 110
 		 144
 		 165
 		 130
 		 74
 		 14
 		 200
 		 125
 		 167.5
 
 130
 		  200
 		  80
 		  292.5
 		  45
 		  30
 		  335
 		 –
 		 180
 		 170
 		 162
 		 147.5
 		 130
 		 155
 		 215
 		 180
 		 81
 		 16
 		 250
 		 140
 		 187.5
 
Size
 		  S
 		 T
 		 V
 		 K
 		 KA 
 		 KB 
 		  KC
 		 KE 
 		 α 
 		  α1
 		  KM
 		  KN(H8)
 
F
 		 FB
 		 FL
 		 F
 		 FB
 		 FL
 		 F
 		 FB
 		 FL
 		 F
 		 FB
 		 FL
 		 F
 		 FB
 		 FL
 
30
 		 5.5
 		 21
 		 27
 		 44
 		 54.5
 		 –
 		 –
 		 6
 		 –
 		 –
 		 4
 		 –
 		 –
 		 M6X11(n,4)
 		 0 0
 		 45 0
 		 68
 		 –
 		 –
 		 50
 		 –
 		 –
 
40
 		 6.5
 		 26
 		 35
 		 60
 		 67
 		 76.5
 		 97
 		 7
 		 9
 		 7
 		 4
 		 5
 		 4
 		 M6X8(n,4)
 		 45 0
 		 45 0
 		 87
 		 115
 		 87
 		 60
 		 95
 		 60
 
50
 		 7
 		 30
 		 40
 		 70
 		 90
 		 87.5
 		 120
 		 9
 		 10
 		 9
 		 5
 		 5
 		 5
 		 M8X10(n,4)
 		 45 0
 		 45 0
 		 90
 		 130
 		 90
 		 70
 		 110
 		 70
 
63
 		 8
 		 36
 		 50
 		 85
 		 82
 		 99
 		 112
 		 10
 		 11
 		 10
 		 6
 		 5
 		 6
 		 M8X14(n,8)
 		 45 0
 		 45 0
 		 150
 		 165
 		 150
 		 115
 		 130
 		 115
 
75
 		 10
 		 40
 		 60
 		 90
 		 111
 		 –
 		 –
 		 13
 		 –
 		 –
 		 6
 		 –
 		 –
 		 M8X14(n,8)
 		 45 0
 		 45 0
 		 165
 		 –
 		 –
 		 130
 		 –
 		 –
 
90
 		 11
 		 45
 		 70
 		 100
 		 111
 		 –
 		 –
 		 13
 		 –
 		 –
 		 6
 		 –
 		 –
 		 M10X18(n,8)
 		 45 0
 		 45 0
 		 175
 		 –
 		 –
 		 152
 		 –
 		 –
 
110
 		 14
 		 50
 		 85
 		 115
 		 131
 		 –
 		 –
 		 15
 		 –
 		 –
 		 6
 		 –
 		 –
 		 M10X18(n,8)
 		 45 0
 		 45 0
 		 230
 		 –
 		 –
 		 170
 		 –
 		 –
 
130
 		 15
 		 60
 		 100
 		 120
 		 140
 		 –
 		 –
 		 15
 		 –
 		 –
 		 6
 		 –
 		 –
 		 M12X21(n,8)
 		 45 0
 		 22.5 0
 		 256
 		 –
 		 –
 		 180
 		 –
 		 –
 

 

 Size
 		  KO
 		  KP
 		 KQ 
 		  b
 		  b1
 		  f
 		  t
 		 t1 
 		  kg
 
F
 		 FL
 		 FB
 		 F
 		 FB
 		 FL
 		 F
 		 FB
 		 FL
 
30
 		 6.5(n,4)
 		 –
 		 –
 		 80
 		 –
 		 –
 		 70
 		 –
 		 –
 		 5
 		 3
 		 –
 		 16.3
 		 10.2
 		 1.2
 
40
 		 9(n,4)
 		 9.5(n,4)
 		 9(n,4)
 		 110
 		 140
 		 110
 		 95
 		 –
 		 95
 		 6(6)
 		 4
 		 –
 		 20.8(21.8)
 		 12.5
 		 2.3
 
50
 		 11(n,4)
 		 9.5(n,4)
 		 1
  180
 		 142
 		 –
 		 142
 		 8(8)
 		 6
 		 M6
 		 28.3(31.3)
 		 21.5
 		 6.2
 
75
 		 14(n,4)
 		 –
  –
 		 –
 		 14
 		 8
 		 M10
 		 48.8
 		 33.0
 		 48
 

Motovario, SITI, STM,

 

Our factory is the main manufacturer and exporter of worm gear reducer in China. We were founded in 1976. We are the best seller in export of worm gears in China, 1st to achieve export License and 1st to achieve ISO9001 and CE Certificate among manufacturers of reducers in China. We are private enterprises since 1996. We have workers and employees of 500 and the yearly output last year is 25 million U. S. Dollars. About 70% of the total output is exported to as many as 38 countries such as USA, Canada, Italy, Spain, , Germany, UK, Japan, Korea, Indonesia, and etc.

 

 

Thanks for your mail. We are very interested in cooperating with you. We are manufacturer and exporter of the following products:

1. Worm gear speed reducer (iron steel cases)

2. Motovario type aluminum case worm gear speed reducers

3. SEW type helical gear speed reducers

4. Sumitomo type cyclo drive gearboxes.

5. ROTEX type jaw coupling

6. Flange coupling

Loo ept ept to the opertunity of cooperating with you in the near future!

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Nmrv nmrv 030 motovario Custom China in Zahedan Iran Worm Wheel Gear Motor Transmission Gear with top quality

Nmrv nmrv 030 motovario Custom China in Zahedan Iran Worm Wheel Gear Motor Transmission Gear with top quality

Gphq China motovario nmrv 130 near me shop in Tehran Iran Nmrv Gearbox with Worm Gear Hollow Shaft Motor Reducer with top quality

Gphq China motovario nmrv 130 near me shop in Tehran Iran Nmrv Gearbox with Worm Gear Hollow Shaft Motor Reducer with top quality

We – EPG Group the most significant worm gearbox, couplings and gears factory in China with five distinct branches. For a lot more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Environmentally friendly company, the company responsible China can a worm equipment generate a worm EPG worm gears set will always adhere to it business spirit of getting functional, modern, productive and outstanding to make the prime global transmission generate.

NMRV worm gearbox motor 

NMRV series worm equipment reducer:
Its structure,define and set up proportions as effectively as overall performance are same with that of
Europe an products,they are interchangeable,and the resources and machining method are innovative internationally.The item is highlighted by:
one.Minimal noise and temperature increase.
two.Substantial bearing ability,easy run and extended services existence.
three.ompact composition,samll quantity,mild weight,gorgeous shape and easy to set up.
four.Can run continually underneath server atmosphere,and has a good trustworthiness.

GPHQ NMRV aluminum worm gearbox motor information:

Variety GPHQ NMRV Worm Equipment Pace Reducer /gearbox motor 
Model: NMRV25/30/ forty/ fifty/ sixty three/ seventy five/ 90/one hundred ten/one hundred thirty/a hundred and fifty
Input Energy: .06KW,.09KW,.12KW,.18KW,.22KW,.25KW,.37KW,.55KW,.75KW,one.1KW,one.5KW,2.2KW,4KW,five.5KW,seven.5KW ,11KW,15KW
IEC Flange 56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5,
100B14,112B5,112B14 132B5,160B5
Ratio 1: seven.five,10,fifteen,twenty,25,30,forty,fifty,60,eighty,100
 
 
 
Material 		 Housing:  Die-Cast Aluminum Alloy for rv25-rv90 , die-cast forged iron for rv110 to rv150 
Worm Equipment-brass+cast iron 
Worm-20CrMn Ti with carburizing and quenching, surface harness is fifty six-62HRC
Shaft-chromium steel-45#
Color: Blue/Silver Or other individuals if amount is large
Packing: Carton or plywood  Case
Promise time : 1 12 months except except Guy-produced destruction
Usages: Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass.
shaft: output reliable shaft or output hollow shaft 

FAQ
one, Q:what’s your MOQ for ac gearbox motor  ?
A: 1pc is ok for every single kind electric powered gear box  motor 

2, Q: What about your warranty for your induction pace reducer motor ?
A: a single 12 months ,but except male-produced wrecked

three, Q: which payment way you can accept ?
A: TT, western union .

four, Q: how about your payment way ?
A: 100%payment in sophisticated much less $5000 ,thirty% payment in superior payment , 70% payment just before sending over $5000.

5, Q: how about your packing of velocity reduction motor  ?
A: plywood situation ,if size is modest  ,we will pack with pallet for much less one particular container 

6, Q: What information ought to be presented, if I purchase electrical helical geared motor  from you ?
A: rated electrical power,  ratio or output pace,variety ,voltage , mounting way , quantity , if more is better.

/ The use of first gear manufacturer’s (OEM) element numbers or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our firm and the shown substitute elements contained herein are not sponsored, authorized, or produced by the OEM. /

Gphq China motovario nmrv 130 near me shop in Tehran Iran Nmrv Gearbox with Worm Gear Hollow Shaft Motor Reducer with top quality