Tag Archives: worm and gear machine

Straight worm and worm wheel gear supplier China in Manila Philippines Wire Drawing Machine for Nail MaEPT Spring Wire Welding Wire PC Wire Mesh with top quality

Straight worm and worm wheel gear supplier China in Manila Philippines Wire Drawing Machine for Nail MaEPT Spring Wire Welding Wire PC Wire Mesh with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

1. Specifications

Straight type steel wire drawing machine
For high carbon steel wire For low carbon steel wire
AC frequency-variation motor 
PLC logical control 
High efficiency 

2. Product Description

 The straight wire drawing machine series of our company have absorbed the advanced advantages from both at home and broad in the machinery design process. Our machine have all kinds of design and configurations according to the different finished products and different request from clients, which makes us in the leading position of concerning the product characterisitics for user. It is applicable to drawing spring steel wires, tyre rib steel wires, steel wires for ropes, optical fiber steel wires, CO2 shield welding wires, flux cored electrodes for air welding, alloy and stainless steel wires, aluminum clad wires, under-relaxation pre-stressed steel wires and so on. 

3. Technical parameter  

Model (Block diameter)

300

350

400

450

500

560

600

700

800

900

1200

Strength of inlet wire (MPa)

≤1250

Number of Block

2~11

2~11

2~11

2~12

2~12

2~12

2~12

2~9

2~9

2~9

2~9

Maximum diameter of inlet wire (mm)

2.8

3.5

4.2

5

5.5

6.5

8

10

12.7

14

16

Minimum diameter of outlet wire (mm)

0.5

0.6

0.75

1

1.2

1.4

1.6

2.2

2.6

3

5

Highest drawing speed (m/s)

 ~25

 ~20

 ~20

 ~16

 ~15

 ~15

 ~12

 ~12

 ~8

 ~7

 ~6

Drawing power (kw)

7.5~18.5 

11~22

11~30

15~37

22~45

22~55

30~75

45~90

55~110

90~132

110~160

 

Instruction of wire drawing machine

Transportation system:

Two grade belt transmission, double enveloping worm wheels, gearbox with hard tooth surface.

Way of speed adjusting:

AC Frequency conversion speed adjusting or DC speed adjusting.
Way of control:

Profibus field bus control system, touching screen show, human-computer communication, long-distance diagnose function.
Way of take-up:

Spooler take-up, trunk take-up, headstand take-up, and all can take-up wire without stop work.
Way of pay-off:

Spooler pay-off, high pay-off frame, “-” type pay-off, duck-nip pay-off, can pay-off without stop work.
Main function:

Slowdown to stop at fixed length automatically, wire broken test and stop work automatically, cut off any block to compose new technical process freely,slowdown to stop automatically when the protecting shield is open, show of all kinds of fault information and the solution, inspection and control of all kinds of running information.

Material that can be drawn: 
Steel wire (High, middle, low carbon steel wire, stainless steel wire, pre-tension steel wire, bead wire, rubber tube wire, spring steel wire, cord wire and so on).Welding wire (Air protecting welding wire, submerged arc welding wire, flux cored wire and so on).lectric wire and cable (Aluminum-clad steel wire, copper wire, aluminum wire and so on).Alloy wire and other kinds of metal wire.

Notes: All the parameters might be changed according to the actual situation.

 

Reference Photos

Packaging & Shipping

We can pack it by pallet, or according to the customers’ specific requirements.

 

Our Services

In order to guarantee the customers are able fully to operate the machine, if the customer need, we can help customer training, includes:
(1) Correct operating mode
(2) Correct maintenance way
(3) Remove simple proble
All the products of our company have already been widely used in metal products area.

 

Any doubt Please contact us.

Steven Shi (Mr.)

HangZhou Suntech Machinery Co., Ltd.
 
 

 

 

 

Company Information

All the products of our company are manufactured according eo the national ept standard, enterprise standard and advanced international group standard, and have already been widely used in metal products area.   

 

FAQ

If you have any interest in our machines, please feel free to contact with us.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Straight worm and worm wheel gear supplier China in Manila Philippines Wire Drawing Machine for Nail MaEPT Spring Wire Welding Wire PC Wire Mesh with top quality

Straight worm and worm wheel gear supplier China in Manila Philippines Wire Drawing Machine for Nail MaEPT Spring Wire Welding Wire PC Wire Mesh with top quality

Manual worm gear model near me shop China in Panipat India and Automatic Die-Cutting & Creasing Machine with top quality

Manual worm gear model near me shop China in Panipat India and Automatic Die-Cutting & Creasing Machine with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

  • Specifications:
Model Unit QMY1200
(SZ1200)		 QMY1300
(SZ1300)		 QMY1500
(SZ1500)
Max. Paper Size  mm 1200*780 1300X960 1500X1100
Min. Paper Size mm 350*350 400X410 500X440
Max. Die-cutting Size mm 1180*760 1280X940 1480X1080
Max. Speed sh/h 0-5500 0-5500 0-4500
Max. Wor ept Pressure T 300 300 300
Cardboard sheet thickness gsm 250-800 250-800 250-800
 Corrugate sheet  Thickness mm 1-7 1-7 1-7
Die-cutting Precision mm ±0.5 ±0.5 ±0.5
Total Power KW 22.5 22.5 27.5
Total Weight kg 13500 15000 18000
Overall Dimension mm 7000*4000*2250 7750*4100*2245 8400*4600*2245

  Features of the machine:
  Main Features:

  • The Bobst type cut structure makes the cutting platform movement like a scissor, it will realize a full and easier cut.
  • Main worm gear uses alloy copper material, after the experienced operator’s manual scraping treatment and strict standard testing, it can ensures the driving parts 10 years life.
  • The main chains adopt imported British Renold brand, the differences of 10 chains are less than 0.2mm.
  • The connect between gear box and driving shaft adopts sleeve and pin structure ensuring a strong connection.
  • Speed:  

The machine adopts frequency controller to achieve stepless speed acceleration which can reach to 5000 times per hour. During actual production, it can generally run at 3600 to 4200 times per hour according to the quality of the board. If the quality of the paper is good, a good operator even can operate the machine at highest speed.

  • Safety:

As it is shown in the picture of the machine, the machine adopts  automatic paper feeding method which keeps the operator away from the die-cutting part. The mounting and adjustment of the die plate is also done outside of the die-cutting part with sensors and detectors at die-cutting part to ensure that the machine can not be started when the die-cutting plate is at adjustment status.
 
Besides the sensors at die-cutting part, there are sensor or approach switches at window part to make the whole machine at monitoring status to ensure its safety.

  • Operation convenience:

 

There is Man-machine interface installed in the control panel which will shows the safety status of the machine as well as malfunctions to facilitate the operator. Camera is also installed in front of the operator for him/her to monitor the operation status at the delivery part.
Main Structures and Key Material
Used Four Main Big Parts: They are: bottom station, moving platform, upper platform and machine wall. The bottom station is made of gray cast iron -HT 200; the moving platform is ductile iron – QT 42-10 and the machine wall is high quality A3 steel.

  • Main Drive:

 

The 11 KW Siemens Motor together with the pneumatic clutch, worm shaft and worm gear forms a moving set to ensure stable pressure out put of not less than 300 tons.
 
The material for the worm shaft is 40Cr with quenching treatment and gear hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
 
The bearing that is used is SKF. The bush is copper alloy ZQSn6-6-3.

  • Die-cutting and Creasing Part:

 
The drive is transferred via crank rod to pendulum which will bring the moving platform to move up and down to reach die-cut and creasing purpose.
 
The pendulum is made of high quality ductile iron. The pendulum axis is done by induction harden with surface hardness HRC 43-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 type automatic die-cutting and creasing machine. Compared with automatic die-cutting and creasing machine which is used for cardboard die-cutting, this type of automatic die-cutting and creasing machine is mainly used for corrugated board which needs less pressure for die-cutting, in this case quite some producers have made smaller width on the pendulum and smaller diameter on the pendulum shaft. We keep wider pendulum and bigger diameter on its shaft to make our machine last for a longer life.

The die-cutting plate uses 7 mm 75 Crl plate which has more hardness and life span than the manganese plate.  
 

  • Board Conveying:

It adopts 3-cam intermittent positioning device to ensure the boarding conveying accurate and stable.
The machine uses gripper bar type with 12A long joints chain which is less in weight and less shock to the intermittent device under the precondition to ensure the strength of the chain. The brand of the chain is Renold U.K with high precise and quality. .    
 
The Gripper bar adopts aviation aluminum with three bridge type- light in weight and high in strength.

  • Electric Part

The electrical parts are designed and assembled according to the European CE standard and uses world wide known brand products.

  • Installation of Die

The die mounting and dismounting adopts side withdrawing ways which time saving and easy for operation.
There are two ways for the fixation of the die-either by bolt or clippers which are subject to customer’s advice.
 
The chase loc ept is pneumatic which is simple, convenient and reliable.
 

  • Special Characters of Our Machine:
  • Clever And Special Front Lay Design:

Compared with the card board sheet, the corrugated board has more strength. If the corrugated board abnormally reaches to the front lay, it will damage the front lay and the gripper bar when the front lay reaches to its highest position.
 
Generally the producers will install sensors on this part to stop the machine when the paper is fed abnormally to the front lay. However, when the machine is running at the high speed, the inertia will bring the machine to run for a while to make the front lay to its highest point and then also damage the front lay and the gripper bar.
 
Our special design is that when the abnormal board feeding happens and being detected, the front lay can never reaches to its highest point which makes free from front lay and gripper bar damages because of abnormal paper feeding.
 
As it is our special design, so there is no picture to be shown here.

  • Auto-Manual Switching System

The Feeding system for this type of machine can do auto and manual. When the sheet shape is good, you can use auto-function. When the shape of the sheet is not good, you can use manual function and do sheet feeding manually.  
 
When the sheet is not good in shape,, you can open the rear beam and lift up the feeder to do manual feeding.  

  • Configurations:

 

Name Brand and Origin Remarks
Bearing SKF Swiss Key part
IKO Japan or HangZhou, China Not key part
Chain Renold U.K; Main Chain ( Discrepancy of less than 0.2 mm for per 10 chains of machine chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France 		 
Photo Electric Switch Fotek ZheJiang  
Stabilizer  MEANWELL ZheJiang  
Variator Delta ZheJiang  
Main Motor Siemens Joint Venture
PLC Delta, ZheJiang  
Man-machine Interface Delta  
Pneumatic Parts Sunrise, ZheJiang  
Rotary Joints SMC Japan  
Motor at feeding and delivery CPG ZheJiang  

Tools Kit

Name Amount Specification
Minus Screw Driver 1 150
Plus Screwdriver 1 150
Monkey Wrench 1 300
Inner hexagon Spanner 1 set 1.5\2\2.5\3\4\5\6\8\10\12\14
Greasing Gun 1  
Oil Gun 1  
Wrench One set 12,14/13,16
Vise 1  
Triangular File 1  

 
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Manual worm gear model near me shop China in Panipat India and Automatic Die-Cutting & Creasing Machine with top quality

Manual worm gear model near me shop China in Panipat India and Automatic Die-Cutting & Creasing Machine with top quality

Bevel in Mandalay Myanmar worm and worm gear dimensions Custom China Gearbox for Agricultural Machine with top quality

Bevel in Mandalay Myanmar worm and worm gear dimensions Custom China Gearbox for Agricultural Machine with top quality

We – EPG Group the largest worm gearbox, couplings and gears factory in China with five different branches. For more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Bevel gearbox for Agricultural Equipment
Our Gearbox has numerous objects for your picking and we can produce as for each your drawing or sample to satisfy your specific ask for
one. Big output torque
2. Safe, reliable, inexpensive and tough
three. Stable transmission, silent operation
4. Substantial carrying capability
5. High modularization design, may possibly equip with various outer electrical power enter conveniently. Exact same equipment sort might equip with different electricity motor. It is easy to understand the combination and junction between each equipment type
6. Transmission ratio: Fine division, extensive scope. The mixed equipment sort could type very large transmission ratio, i. E. Output very low rotary pace.
seven. Kind of installation: The position to be put in is not limited.
eight. Substantial toughness, compact the box body of higher power forged iron, equipment and gear shaft adapts the gasoline carbonization, quenching and fantastic grinding method, consequently the bearing capability of unit volume is large.
9. Long existence: Underneath the condition of proper type picked(including picking ideal operation parament ) regular procedure and routine maintenance, the daily life if main parts speed reducer(except donning components)should not be much less than 20000 several hours. The wearing parts incorporate lubricating oil, oil seal and bearing.
ten. Lower sound: Due to the fact primary areas of pace reducer are processed, and analyzed critically, therefore the sound of velocity reducer is minimal.
eleven.Our equipment box have attained the ept worldwide degree, can substitute the identical sort of items imported.

Firm Info

HangZhou ept ept Co., Ltd. is a specialized provider of a full selection of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined elements and so on.

Owing to our sincerity in supplying very best service to our consumers, comprehension of your wants and overriding perception of accountability toward filling ordering specifications, we have obtained the ept of purchasers globally. Having accrued valuable encounter in cooperating with international consumers, our products are marketing well in the American, European, South American and Asian markets.Our items are made by present day computerized equipment and tools. Meanwhile, our items are made according to substantial top quality requirements, and complying with the intercontinental sophisticated normal criteria.

With numerous years’ encounter in this line, we will be dependable by our rewards in aggressive price, a single-time shipping, prompt reaction, on-hand engineering assist and excellent right after-income solutions.

In addition, all our manufacturing techniques are in compliance with ISO9001 specifications. We also can style and make non-standard goods to satisfy customers’ special specifications. Top quality and credit history are the bases that make a corporation alive. We will supply ideal services and high top quality merchandise with all sincerity. If you require any data or samples, remember to make contact with us and you will have our shortly reply.

/ The use of authentic products manufacturer’s (OEM) portion numbers or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our company and the listed substitution areas contained herein are not sponsored, accepted, or made by the OEM. /

Bevel in Mandalay Myanmar worm and worm gear dimensions Custom China Gearbox for Agricultural Machine with top quality

Aluminum in Amsterdam Netherlands worm and gear machine near me shop China Worm Reduction Gearbox Accessories Ys-R02 with top quality

Aluminum in Amsterdam Netherlands worm and gear machine near me shop China Worm Reduction Gearbox Accessories Ys-R02 with top quality

We – EPG Group the largest worm gearbox, couplings and gears manufacturing facility in China with 5 diverse branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Share-holding in other production businesses (i.e. EPG and HPT ), buying and selling businesses and provider companies, as nicely as important business partnerships, create an best distribution of competences enabling larger specialization and intense rapidity in the management of inquiries. This organisation helps make us an all-embracing, flexible and extremely experienced supplier in the entire world of motion drives. worm gear grease EPG China worm gearbox with clutch was awarded with “famous product of Zhejiang Province” and “well-known manufacturer of Zhejiang Province”. Design
Armed with the idea of the modest in quantity&comma light-weight in excess weight and novel in sample&comma we made and designed the XLHJ sequence gear operators which are wildly utilized in the location of valve automation manage&period of time These varieties of products have been specifically made used for butterfly valve&comma ball valve and plug valve together with YSPHA sequence pneumatic actuator

Characteristic
one&comma Effortless link&colon There are two keyway aside 90¡ In the internal hole of worm gear so as to be hassle-free for customer to select relative place amongst gear operator and valve&time period
2&comma Simple working&colon Pull out the placement pin and rotate off center device with 180¡ To recognize pneumatic generate by positioning pin acted or to recognize handbook travel in the opposite way&period of time
3&comma Dustproof and water-resistant&colon The gear operator is stuffed with specific lubricant before leaving the manufacturing facility&period It is solid sealed with valve right after set up possessing dustproof and waterproof function with protecting grade IP65&time period
four&comma Numerous Output torques&colon It is composed of a collection of products&comma so output torque matches with all kinds of pneumatic devices and valves&period of time

Operating basic principle
one&comma Assembling procedures&colon The base of equipment operator ought to be related with valve&comma bracket area linked with cylinder &lparactuator&rpar&comma valve stem go by way of the interior hole of worm gear and the square on the end of stem matches with sq. gap of cylinder &lparactuator&rpar&time period
2&comma Operating techniques&colon The cylinder &lparactuator&rpar drives valve stem and worm equipment rotating together when pneumatic generate and worm shaft meshes with worm equipment to generate valve stem rotating alongside with piston of cylinder &lparactuator&rpar moving when manual drive&period When pneumatic push&comma pull out the pneumatic drive by worm gear rotating following with pneumatic valve stem&time period Just make the worm shaft mesh to understand handbook travel&interval
 

Gear Box Sort Ratio Output
&lparTorque Nm&rpar		 Enter
&lparTorque Nm&rpar		 Weight&lparKG&rpar
EG350 forty four&colon1 350 31&period25 6
EG700 fifty two&colon1 700 fifty sixteen&period3
EG1600 forty two&colon1 1600 one hundred twenty five 25
EG3000 seventy two&colon1 3000 155 49&period5

 

/ The use of unique products manufacturer’s (OEM) portion figures or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the detailed substitution parts contained herein are not sponsored, approved, or produced by the OEM. /

Aluminum in Amsterdam Netherlands worm and gear machine near me shop China Worm Reduction Gearbox Accessories Ys-R02 with top quality