2023-06-19
Tag Archives: right angle worm gearbox
China Good quality Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Bucket Elevators double enveloping worm gearbox
Product Description
Product Description
Product Description
-K Series Helical Bevel Gearbox
Product Features
1. Input mode: Coupled motor, belted motor, input shaft or connection flange.
2. Output: Right angle
3. Compact structure. Rigid tooth face. Carrying greater torque, high loading capacity.
4.High precision gear, ensuring the unit to operate stably, smooth transmission.
5. Low noise, long lifespan. Large overlap coefficient, abrasion resistant.
Product Parameters
1. Technical data
| Size | 38 | 48 | 58 | 68 | 78 | 88 | 98 | 108 | 128 | 158 | 168 | 188 |
| Structure | K KA KF KAF KAZ KAT KAB | |||||||||||
| Input power rating(kw) | 0.18~3 | 0.18~3 | 0.18~5.5 | 0.18~5.5 | 0.37~11 | 0.75~22 | 1.3~30 | 3~45 | 7.5~90 | 11~160 | 11~200 | 18.5~200 |
| Ratio | 5.36~ 106.38 |
5.81~ 131.87 |
6.57~ 145.15 |
7.14~4 4.79 |
7.22~ 192.18 |
7.19~ 197.27 |
8.95~ 175.47 |
8.74~ 141.93 |
8.68~ 146.07 |
12.66~ 150.03 |
17.35~ 164.44 |
17.97~ 178.37 |
| Maximum Torque(N.m) | 200 | 400 | 600 | 820 | 1550 | 2770 | 4300 | 8000 | 13000 | 18000 | 32000 | 50000 |
| Weight | 11 | 20 | 27 | 33 | 57 | 85 | 130 | 250 | 380 | 610 | 1015 | 1700 |
2: Design option
| K series gear units are available in the following designs | |
| KAZ..Y.. | Short-flange-mounted helical-bevel gear units with hollow shaft |
| K…Y… | Foot-mounted helical-bevel gear units with CZPT shaft |
| KAT…Y… | Torque-arm-mounted helical-bevel gear units with hollow shaft |
| KAB…Y… | Foot-mounted helical-bevel gear units with hollow shaft |
| K(KF,KA,KAF,KAB,KAZ)S… | Shaft input helical-bevel gear units |
| KA…Y… | Helical-bevel gear units with hollow shaft |
| KA(K, KF ,KAF, KAB ,KAZ)R..Y… | Combinatorial helical-bevel gear units |
| KF…Y… | Flange-mounted helical-bevel gear units with CZPT shaft |
| KA(K, KF ,KAF ,KAZ)S…R… | Shaft input combinatorial helical-bevel gear units |
| KAF…Y… | Flange-mounted helical-bevel gear units with hollow shaft |
| KA(K, KF ,KAF, KAB ,KAZ)…Y… | When equipping the user’s motor or the special 1 ,the flange is required to be connected |
Materials Data Sheet
|
Housing material |
Grey Cast iron |
|
Housing hardness |
HBS163~255 |
|
Gear material |
20CrMnTi alloy steel |
|
Surface hardness of gears |
HRC58°~62 ° |
|
Gear core hardness |
HRC33~48 |
|
Input / Output shaft material |
40Cr alloy steel |
|
Input / Output shaft hardness |
HRC32~36 |
|
Machining precision of gears |
accurate grinding, 6~5 Grade |
|
Lubricating oil |
GB L-CKC220-460, Shell Omala220-460 |
|
Heat treatment |
tempering, cementiting, quenching, normalizing, etc. |
|
Efficiency |
94%~96% (depends on the transmission stage) |
|
Noise (MAX) |
60~68dB |
|
Temp. rise (MAX) |
40°C |
|
Temp. rise (Oil)(MAX) |
50°C |
|
Vibration |
≤20µm |
|
Backlash |
≤20Arcmin |
|
Brand of bearings |
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK. |
|
Brand of oil seal |
NAK — ZheJiang or other brands requested |
Detailed Photos
Our process of production
Our product line
Company Profile
Company Profile
Bode was founded in 2007, which is located in HangZhou city, ZHangZhoug province. As 1 professional manufacturer and exporter, we have more than 17 years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare parts. We have factory with advanced production and test equipment, the strong development of team and producing capacity offer our customers with high quality products. Our products widely served to various industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, medicine, wooden etc. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any questions, good offer always for you for long term business.
FAQ
Q1: Are you trading company or manufacturer?
A: We are factory.
Q2: What kinds of gearbox can you produce for us?
A: Main products of our company: R, S, K, F series helical-tooth reducer, RV series worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box
Q3: Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
Q4: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
Q5: What information shall we give before placing a purchase order?
A: a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
Q6: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.
Q7: What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
If you are interested in our product, welcome to contact with us.
Our team will do our best to meet your need 🙂
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Three-Step |
| Samples: |
US$ 90/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Worm gear reducer gearbox
A worm gear reducer gearbox is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.
Viscosity
A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer gearbox increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer gearbox. A worm gear reducer gearbox with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.
Self-locking function
Worm reducer gearboxes have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducer gearboxes is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducer gearboxes, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducer gearboxes are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer gearbox more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
application
The worm gear reducer gearbox market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducer gearboxes can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducer gearboxes are the most popular type of reducer gearbox. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.
cost
The cost of a worm gear reducer gearbox depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer gearbox market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer gearbox is a popular type of reducer gearbox. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer gearbox in multiple installation locations.
Another application for worm gear reducer gearboxes is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer gearbox is determined by several factors. Size and material are important. Worm gear reducer gearboxes can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
manufacturing
Agknx Transmission Ltd. manufactures premium worm gear reducer gearboxes with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer gearbox also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
editor by CX 2023-06-12
China Wpa Wpo Wps Wpx Right Angle Foot Mounted Worm Reducer Gear Unit Gear Box worm gearbox application
Item Description
Wpa Wpo Wps Wpx Proper Angle Foot Mounted Worm Reducer Equipment Unit Gear Box
Functions:
one. Compact composition and simple assembly
two. Wide pace ranges and substantial torque
3. Reduced noise, great sealing efficiency, large efficiency
four. Stable and risk-free, long lifetime, common
five. Multi-construction, various assembling approaches
Product image:
Specification:
| ANG WP Worm Pace Equipment Unit | |
| Product | WPA WPS WPDA WPDS WPO WPX… |
| Size | forty-250(one phase) |
| Input energy | .12kw ~ 33kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/10 ~ 1/sixty(single stage) |
| Input motor | AC (1 stage or 3 phase) / DC motor |
| Output torque | six-6050Nm |
| Put in type | Foot / CZPT shaft / Hollow shaft… |
| Material of housing | Die-forged iron |
| Application | Foodstuff Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, etc. |
FAQ
Q: Can you make the equipment device with customization?
A: Sure, we can personalize for every your ask for, like flange, shaft, configuration, material, and many others.
Q: Do you provide samples?
A: Of course. Sample is available for tests.
Q: What is your MOQ?
A: It is 10pcs for the beginning of our company.
Q: What is your lead time?
A: Standard item want 5-30days, a little bit more time for personalized items.
Q: Do you offer technologies support?
A: Indeed. Our company have design and style and development staff, we can supply engineering help if you
need.
Q: How to ship to us?
A: It is accessible by air, or by sea, or by practice.
Q: How to pay out the cash?
A: T/T and L/C is chosen, with different currency, like USD, EUR, RMB, and many others.
Q: How can I know the solution is suitable for me?
A: >1ST verify drawing and specification >2nd test sample >3rd commence mass production.
Q: Can I arrive to your business to pay a visit to?
A: Of course, you are welcome to check out us at any time.
Q: How shall we make contact with you?
A: You can send inquiry directly, and we will answer within 24 hrs.
|
/ Piece | |
1 Piece (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) 1pcs
|
|---|
###
| Customization: |
|---|
###
| ANG WP Worm Speed Gear Unit | |
| Model | WPA WPS WPDA WPDS WPO WPX… |
| Size | 40-250(single stage) |
| Input power | 0.12kw ~ 33kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/10 ~ 1/60(single stage) |
| Input motor | AC (1 phase or 3 phase) / DC motor |
| Output torque | 6-6050Nm |
| Install type | Foot / Solid shaft / Hollow shaft… |
| Material of housing | Die-cast iron |
| Application | Food Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, etc. |
|
/ Piece | |
1 Piece (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) 1pcs
|
|---|
###
| Customization: |
|---|
###
| ANG WP Worm Speed Gear Unit | |
| Model | WPA WPS WPDA WPDS WPO WPX… |
| Size | 40-250(single stage) |
| Input power | 0.12kw ~ 33kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/10 ~ 1/60(single stage) |
| Input motor | AC (1 phase or 3 phase) / DC motor |
| Output torque | 6-6050Nm |
| Install type | Foot / Solid shaft / Hollow shaft… |
| Material of housing | Die-cast iron |
| Application | Food Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, etc. |
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by CX 2023-03-27
China Bode 1: 10 Ratio RV Right Angle Small Worm Gearboxes combined worm gearbox
Merchandise Description
Item Description
Merchandise Description
-RV Series Worm Gear box
Product Functions
one. Compact mechanical structure, modest and successful
two. With bigger transmission ratio, massive torque, large load ability, secure procedure, modest sound and durable
3. Simple to set up, versatile, superior overall performance, straightforward routine maintenance
4. Great warmth exchange overall performance, rapid warmth dissipation
5. The worm gear and worm reducer soak up domestic and international superior engineering, exclusive and novel box construction, the gorgeous look is produced of large quality aluminum alloy die casting.
Item Application
NMRV worm gearbox are broadly utilized in the sectors, Like foodstuff,ceramics, and chemical production, as well as packing, printing, dyeing and plastics.
Product Parameters
Technical data
| Types | Rated Electrical power | Rated Ratio | Input Hole Dia. | Input Shaft Dia. | Output Gap Dia. | Output Shaft Dia. |
| RV030 | .06KW~.18KW | seven.5~80 | Φ9(Φ11) | Φ9 | Φ14 | Φ14 |
| RV040 | .12KW~.37KW | seven.5~eighty | Φ11(Φ14) | Φ9 | Φ14 | Φ14 |
| RV050 | .12KW~.75KW | 7.5~a hundred | Φ11(Φ14,Φ19) | Φ14 | Φ25(Φ24) | Φ25 |
| RV063 | .37KW~1.5KW | 7.5~one hundred | Φ14(Φ19,Φ24) | Φ19 | Φ25(Φ28) | Φ25 |
| RV075 | .55KW~4.0KW | 7.5~a hundred | Φ14(Φ19,Φ24,Φ28) | Φ24 | Φ28(Φ35) | Φ28 |
| RV090 | .75KW~4.0KW | 7.5~a hundred | Φ19(Φ24,Φ28) | Φ24 | Φ35(Φ38) | Φ35 |
| RV110 | 1.1KW~7.5KW | seven.5~one hundred | Φ19(Φ24,Φ28,Φ38) | Φ28 | Φ42 | Φ42 |
| RV130 | 2.2KW~7.5KW | seven.5~one hundred | Φ24(Φ28,Φ38) | Φ30 | Φ45 | Φ45 |
| Sort | Worm Gearbox Pace Reducer | |||||
| Ratio | 7.5, 10, 15, twenty, twenty five, 30, 40, 50, 60, eighty, one hundred | |||||
| Coloration | Blue/silver Gray | |||||
| Material | Aluminum alloy | |||||
| worm wheel: Wearable stannum bronze alloy | ||||||
| worm shaft: 20Cr, carbonize&quencher | ||||||
| output shaft: 40CrMnTi | ||||||
| Packing | Carton, Picket Circumstance. Wood pallet. | |||||
| Flange | IEC standard flange or personalized | |||||
| Input electricity | 0.06kw, .09kw, .12kw, .18kw, .25kw, .37kw, .55kw, .75kw, 1.1kw, 1.5kw, 2.2kw, 3.0kw, 4.0kw, 5.5kw, 7.5kw | |||||
| Usages | Automation industry, medium mixers and so on. | |||||
Detailed Pictures
Our approach of generation
Our item line
Firm Profile
Firm Profile
Bode was founded in 2007, which is located in HangZhou town, ZHangZhoug province. As 1 professional producer and exporter, we have a lot more than seventeen years’ expertise in R & D of worm reducer, equipment reducer, gearbox , AC motor and relative spare areas. We have manufacturing unit with advanced production and test gear, the powerful development of crew and producing capability provide our consumers with substantial top quality goods. Our merchandise widely served to different industries of Metallurgy, Chemical compounds, lifting, mining, Petroleum, textile, medicine, wood and so on. Main marketplaces: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to inquire us any queries, very good supply constantly for you for extended expression enterprise.
FAQ
Q1: Are you investing firm or manufacturer?
A: We are factory.
Q2: What types of gearbox can you create for us?
A: Main goods of our business: R, S, K, F collection helical-tooth reducer, RV sequence worm gear reducer,H Sequence Parallel Shaft Helical Reduction Gear Box
Q3: Can you make as per customized drawing?
A: Indeed, we provide custom-made support for clients.
This autumn: Can we get 1 laptop of each item for good quality screening?
A: Sure, we are glad to acknowledge trial order for top quality screening.
Q5: What info shall we give before placing a obtain purchase?
A: a) Type of the gearbox, ratio, input and output kind, enter flange, mounting placement, and motor informationetc.
b) Housing color.
c) Obtain amount.
d) Other particular specifications.
Q6: How prolonged is your shipping and delivery time?
A: Typically it is 5-ten days if the merchandise are in stock. or it is 15-20 days if the merchandise are not in stock.
Q7: What is your terms of payment ?
A: thirty% Advance payment by T/T right after signing the agreement.70% ahead of shipping
If you are interested in our item, welcome to get in touch with with us.
Our crew will do our ideal to meet up with your want 🙂
|
US $20-300 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Industry |
| Step: | Industry |
###
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Models | Rated Power | Rated Ratio | Input Hole Dia. | Input Shaft Dia. | Output Hole Dia. | Output Shaft Dia. |
| RV030 | 0.06KW~0.18KW | 7.5~80 | Φ9(Φ11) | Φ9 | Φ14 | Φ14 |
| RV040 | 0.12KW~0.37KW | 7.5~80 | Φ11(Φ14) | Φ9 | Φ14 | Φ14 |
| RV050 | 0.12KW~0.75KW | 7.5~100 | Φ11(Φ14,Φ19) | Φ14 | Φ25(Φ24) | Φ25 |
| RV063 | 0.37KW~1.5KW | 7.5~100 | Φ14(Φ19,Φ24) | Φ19 | Φ25(Φ28) | Φ25 |
| RV075 | 0.55KW~4.0KW | 7.5~100 | Φ14(Φ19,Φ24,Φ28) | Φ24 | Φ28(Φ35) | Φ28 |
| RV090 | 0.75KW~4.0KW | 7.5~100 | Φ19(Φ24,Φ28) | Φ24 | Φ35(Φ38) | Φ35 |
| RV110 | 1.1KW~7.5KW | 7.5~100 | Φ19(Φ24,Φ28,Φ38) | Φ28 | Φ42 | Φ42 |
| RV130 | 2.2KW~7.5KW | 7.5~100 | Φ24(Φ28,Φ38) | Φ30 | Φ45 | Φ45 |
| Type | Worm Gearbox Speed Reducer | |||||
| Ratio | 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 | |||||
| Color | Blue/silver Grey | |||||
| Material | Aluminum alloy | |||||
| worm wheel: Wearable stannum bronze alloy | ||||||
| worm shaft: 20Cr, carbonize&quencher | ||||||
| output shaft: 40CrMnTi | ||||||
| Packing | Carton, Wooden Case. Wooden pallet. | |||||
| Flange | IEC standard flange or customized | |||||
| Input power | 0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3.0kw, 4.0kw, 5.5kw, 7.5kw | |||||
| Usages | Automation industry, medium mixers and so on. | |||||
|
US $20-300 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Industry |
| Step: | Industry |
###
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Models | Rated Power | Rated Ratio | Input Hole Dia. | Input Shaft Dia. | Output Hole Dia. | Output Shaft Dia. |
| RV030 | 0.06KW~0.18KW | 7.5~80 | Φ9(Φ11) | Φ9 | Φ14 | Φ14 |
| RV040 | 0.12KW~0.37KW | 7.5~80 | Φ11(Φ14) | Φ9 | Φ14 | Φ14 |
| RV050 | 0.12KW~0.75KW | 7.5~100 | Φ11(Φ14,Φ19) | Φ14 | Φ25(Φ24) | Φ25 |
| RV063 | 0.37KW~1.5KW | 7.5~100 | Φ14(Φ19,Φ24) | Φ19 | Φ25(Φ28) | Φ25 |
| RV075 | 0.55KW~4.0KW | 7.5~100 | Φ14(Φ19,Φ24,Φ28) | Φ24 | Φ28(Φ35) | Φ28 |
| RV090 | 0.75KW~4.0KW | 7.5~100 | Φ19(Φ24,Φ28) | Φ24 | Φ35(Φ38) | Φ35 |
| RV110 | 1.1KW~7.5KW | 7.5~100 | Φ19(Φ24,Φ28,Φ38) | Φ28 | Φ42 | Φ42 |
| RV130 | 2.2KW~7.5KW | 7.5~100 | Φ24(Φ28,Φ38) | Φ30 | Φ45 | Φ45 |
| Type | Worm Gearbox Speed Reducer | |||||
| Ratio | 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 | |||||
| Color | Blue/silver Grey | |||||
| Material | Aluminum alloy | |||||
| worm wheel: Wearable stannum bronze alloy | ||||||
| worm shaft: 20Cr, carbonize&quencher | ||||||
| output shaft: 40CrMnTi | ||||||
| Packing | Carton, Wooden Case. Wooden pallet. | |||||
| Flange | IEC standard flange or customized | |||||
| Input power | 0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3.0kw, 4.0kw, 5.5kw, 7.5kw | |||||
| Usages | Automation industry, medium mixers and so on. | |||||
Worm reducer gearbox
Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.<br
Mechanics
A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.
Sizes
Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
Applications
The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.
Cost
The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
Self-locking function
A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.
editor by czh 2023-01-23
China RV Series Right Angle Gearmotor Worm Gearbox with Motor worm gearbox assembly
Item Description
Solution Application
RV collection worm pace reducer,One ,double and universal velocity reducer.
1 Substantial high quality, It adopts tough tooth equipment with large accuracy
two Huge output torque,stable transmission with lower sound
three Higher heat-radiating performance,stylish form,tough service daily life 4,Ideal for omni-bearing set up
four Low noise and smooth managing
five Worm drive uses hollow flank worm
six Large loading capability, lower in temperature increase and the long beneficial daily life
seven Number of big difference among transmission ratio charge, I = 6~13800
8 Compact framework, little size, convenient routine maintenance
9 Are dependent the special modulation combination technique, so its convenient for them to fit all sorts of motors or to link with other electricity enter. The exact same sort of reducer can suit motors with distinct electrical power, so that its feasible for diverse types of devices to merge or connect.
The gearboxes can be utilized to numerous industrial spot, these kinds of as Metallurgical, mines, lifting, transportation, petrochemical, design, textile, pharmaceutical, foodstuff, environmental, light-weight electric powered, plastic equipment, paper, parking equipment and so on. Our technical engineers can decide on product for you in accordance to your Ask for, and we also can source our factory catalogue for your reference.
Worm Gear Speed Reducer/ gearbox
| Worm Gear Speed Reducer/ gearbox | |
| Model | NMRV25/thirty/40/fifty/sixty three/75/90/a hundred/a hundred thirty/a hundred and fifty |
| Ratio | seven.5,ten,15,twenty,twenty five,30,40,fifty,60,eighty,a hundred. |
| Shade | Blue(RAL5571)/Silver grey (RAL9006) Or On Customer Request |
| Materials | Aluminum alloy Worm wheel: Aluminum Bronze or Zinc Bronze Worm shaft: 20CrMn Ti Output Shaft: steel-45# |
| Packing | Carton, Honey Comb Carton, Wooden Case with wooden pallet |
| Guarantee | 1 Year |
| Input Power | .09kw,.18kw,1.1KW,1.5KW,2.2KW,3KW,4KW,5.5KW,7.5KW,11Kw and so on |
| Usages | Industrial Machine: Food Stuff, Ceramics, CHEMICAL, Packing, Dyeing,Wood working, Glass. |
| IEC Flange | IEC standard flange or on customer request |
| Lubricant | Synthetic oil or worm gear oil |
Specification:
| Model: | NMRV25-a hundred and fifty |
| Ratio: | 1:7.5,ten,fifteen,20,25,30,40,50,sixty,80,100 |
| Colour: | Blue/Silver Or On Consumer Ask for |
| Materials: | Housing: Die-Solid Aluminium Alloy |
| Worm Equipment-Copper-10-3# | |
| Worm-20CrMnTi with carburizing and quenching, surface area harness is fifty six-62HRC | |
| Shaft-chromium steel-forty five# | |
| Packing: | Carton and Picket Case |
| Bearing: | C&U Bearing and equal Chinese manufacturer |
| Enter Power: | .06KW,.09KW,.12KW,.18KW,.22KW,.25KW,.37KW,.55KW, .75KW,1.1KW,1.5KW,2.2KW,4KW,5.5KW,7.5KW |
| Usages: | Industrial Device: Foods processing, Ceramics, Conveyor, Packing, Dyeing, Woodworking, Glass. |
| IEC Flange: | 56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5, 100B14,112B5,112B14 |
| Lubricant: | Synthetic & Mineral |
| NMRV sequence gearbox large energy equipment velocity reducer gearbox for wind | |
| Kind | NMRV63 |
| Power | .06-7.5KW |
| Output Velocity | .3-419RPM |
| Output Torque | two.6-4596NM |
| Ratio | 7.5-5000 |
| Normal voltage and frequency | 380V&50HZ |
| Creation time | 25-30DAYS |
| Rewards | 1.Compact construction, light weight, large torque and superb functionality. two. Secure in managing, low in sound, huge in load, reduced in intake, successful in transmission, minimal in temperature and lengthy in service life. |
| Service | 1 .Prosperous export experience more than fourteen years 2 .Commit to transmission systematize solution far more than 21 a long time knowledge 3. we handed CE &ISO9001&ISO14001 certified four. 100% Payment protection five. one hundred% Product high quality safety six.Provide consultation and after-sale,experienced engineers |
Parts:
1. Housing: Die-cast Aluminium Alloy Gearbox (RV571~RV090)
Cast Iron Gearbox (RV110~RV150)
two. Worm Wheel: Wearable Tin Bronze Alloy, Aluminum Bronze Alloy
three. Worm Shaft: 20Cr Metal, carburizing, quenching, grinding, surface area hardness fifty six-62HRC, .3-.5mm remaining carburized layer after precise grinding
four. Enter Configurations:
Geared up with Electric powered Motors (AC Motor, Brake Motor, DC Motor, Servo Motor), IEC-normalized Motor Flange
Reliable Shaft Enter, Worm Shaft Tail Extension Enter
5. Output Configurations: Keyed Hollow Shaft Output
Hollow Shaft with Output Flange, Plug-in Reliable Shaft Output
6. Spare Parts: Worm Shaft Tail Extension, Solitary Output Shaft, Double Output Shaft, Output Flange, Torque Arm, Dust Go over
7. Gearbox Painting: Aluminium Alloy Gearbox:
Right after Shot Blasting, Anticorrosion Treatment method and Phosphating, Paint with the Shade of RAL 5571 Gentian Blue or RAL 7035 Light Grey
Forged Iron Gearbox:
Right after Portray with Red Antirust Paint, Paint with the Colour of RAL 5571 Gentian Blue
Models:
Hollow Shaft Input with IEC-normalized Motor Flange, RV571~RV150, Solid Shaft Input, RV571~RV150
Features:
one. Good quality aluminum alloy gear box, mild weight and not rust
two. 2 optional worm wheel resources: Tin bronze or aluminum bronze alloy
3. Regular components and really flexible for shaft configurations and motor flange interface
four. Several optional mounting alternatives
5. Minimal noise, Large effectiveness in heat dissipation
| Designs | Rated Electrical power | Rated Ratio | Input Hole Dia. | Enter Shaft Dia. | Output Hole Dia. | Output Shaft Dia. |
| RV571 | .06KW~.12KW | 5~60 | Φ9 | Φ9 | Φ11 | Φ11 |
| RV030 | .06KW~.25KW | five~80 | Φ9(Φ11) | Φ9 | Φ14 | Φ14 |
| RV040 | .09KW~.55KW | 5~one hundred | Φ9(Φ11,Φ14) | Φ11 | Φ18(Φ19) | Φ18 |
| RV050 | .12KW~1.5KW | 5~one hundred | Φ11(Φ14,Φ19) | Φ14 | Φ25(Φ24) | Φ25 |
| RV063 | .18KW~2.2KW | 7.5~a hundred | Φ14(Φ19,Φ24) | Φ19 | Φ25(Φ28) | Φ25 |
| RV075 | .25KW~4.0KW | 7.5~one hundred | Φ14(Φ19,Φ24,Φ28) | Φ24 | Φ28(Φ35) | Φ28 |
| RV090 | .37KW~4.0KW | 7.5~100 | Φ19(Φ24,Φ28) | Φ24 | Φ35(Φ38) | Φ35 |
| RV110 | .55KW~7.5KW | seven.5~100 | Φ19(Φ24,Φ28,Φ38) | Φ28 | Φ42 | Φ42 |
| RV130 | .75KW~7.5KW | 7.5~one hundred | Φ24(Φ28,Φ38) | Φ30 | Φ45 | Φ45 |
| RV150 | 2.2KW~15KW | seven.5~100 | Φ28(Φ38,Φ42) | Φ35 | Φ50 | Φ50 |
Ratio: 5, 7.5, ten, 15, twenty, 25, thirty, forty, fifty, 60, eighty, one hundred
|
US $30-238 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Machinery |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Layout: | Worm |
| Hardness: | Hardened Tooth Surface |
| Installation: | as Request |
| Step: | Double-Step |
###
| Customization: |
Available
|
|---|
###
| Worm Gear Speed Reducer/ gearbox | |
| Model | NMRV25/30/40/50/63/75/90/100/130/150 |
| Ratio | 7.5,10,15,20,25,30,40,50,60,80,100. |
| Color | Blue(RAL5010)/Silver grey (RAL9006) Or On Customer Request |
| Material | Aluminum alloy Worm wheel: Aluminum Bronze or Zinc Bronze Worm shaft: 20CrMn Ti Output Shaft: steel-45# |
| Packing | Carton, Honey Comb Carton, Wooden Case with wooden pallet |
| Warranty | 1 Year |
| Input Power | 0.09kw,0.18kw,1.1KW,1.5KW,2.2KW,3KW,4KW,5.5KW,7.5KW,11Kw and so on |
| Usages | Industrial Machine: Food Stuff, Ceramics, CHEMICAL, Packing, Dyeing,Wood working, Glass. |
| IEC Flange | IEC standard flange or on customer request |
| Lubricant | Synthetic oil or worm gear oil |
###
| Model: | NMRV25-150 |
| Ratio: | 1:7.5,10,15,20,25,30,40,50,60,80,100 |
| Color: | Blue/Silver Or On Customer Request |
| Material: | Housing: Die-Cast Aluminium Alloy |
| Worm Gear-Copper-10-3# | |
| Worm-20CrMnTi with carburizing and quenching, surface harness is 56-62HRC | |
| Shaft-chromium steel-45# | |
| Packing: | Carton and Wooden Case |
| Bearing: | C&U Bearing and equivalent Chinese brand |
| Input Power: | 0.06KW,0.09KW,0.12KW,0.18KW,0.22KW,0.25KW,0.37KW,0.55KW, 0.75KW,1.1KW,1.5KW,2.2KW,4KW,5.5KW,7.5KW |
| Usages: | Industrial Machine: Food processing, Ceramics, Conveyor, Packing, Dyeing, Woodworking, Glass. |
| IEC Flange: | 56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5, 100B14,112B5,112B14 |
| Lubricant: | Synthetic & Mineral |
###
| NMRV series gearbox high power gear speed reducer gearbox for wind | |
| Type | NMRV63 |
| Power | 0.06-7.5KW |
| Output Speed | 0.3-419RPM |
| Output Torque | 2.6-4596NM |
| Ratio | 7.5-5000 |
| Standard voltage and frequency | 380V&50HZ |
| Production time | 25-30DAYS |
| Advantages | 1.Compact structure, light weight, large torque and excellent performance. 2. Stable in running, low in noise, large in load, low in consumption, efficient in transmission, low in temperature and long in service life. |
| Service | 1 .Rich export experience more than 14 years 2 .Devote to transmission systematize solution more than 21 years experience 3. we passed CE &ISO9001&ISO14001 certified 4. 100% Payment protection 5. 100% Product quality protection 6.Provide consultation and after-sale,experienced engineers |
###
| Models | Rated Power | Rated Ratio | Input Hole Dia. | Input Shaft Dia. | Output Hole Dia. | Output Shaft Dia. |
| RV025 | 0.06KW~0.12KW | 5~60 | Φ9 | Φ9 | Φ11 | Φ11 |
| RV030 | 0.06KW~0.25KW | 5~80 | Φ9(Φ11) | Φ9 | Φ14 | Φ14 |
| RV040 | 0.09KW~0.55KW | 5~100 | Φ9(Φ11,Φ14) | Φ11 | Φ18(Φ19) | Φ18 |
| RV050 | 0.12KW~1.5KW | 5~100 | Φ11(Φ14,Φ19) | Φ14 | Φ25(Φ24) | Φ25 |
| RV063 | 0.18KW~2.2KW | 7.5~100 | Φ14(Φ19,Φ24) | Φ19 | Φ25(Φ28) | Φ25 |
| RV075 | 0.25KW~4.0KW | 7.5~100 | Φ14(Φ19,Φ24,Φ28) | Φ24 | Φ28(Φ35) | Φ28 |
| RV090 | 0.37KW~4.0KW | 7.5~100 | Φ19(Φ24,Φ28) | Φ24 | Φ35(Φ38) | Φ35 |
| RV110 | 0.55KW~7.5KW | 7.5~100 | Φ19(Φ24,Φ28,Φ38) | Φ28 | Φ42 | Φ42 |
| RV130 | 0.75KW~7.5KW | 7.5~100 | Φ24(Φ28,Φ38) | Φ30 | Φ45 | Φ45 |
| RV150 | 2.2KW~15KW | 7.5~100 | Φ28(Φ38,Φ42) | Φ35 | Φ50 | Φ50 |
|
US $30-238 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Machinery |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Layout: | Worm |
| Hardness: | Hardened Tooth Surface |
| Installation: | as Request |
| Step: | Double-Step |
###
| Customization: |
Available
|
|---|
###
| Worm Gear Speed Reducer/ gearbox | |
| Model | NMRV25/30/40/50/63/75/90/100/130/150 |
| Ratio | 7.5,10,15,20,25,30,40,50,60,80,100. |
| Color | Blue(RAL5010)/Silver grey (RAL9006) Or On Customer Request |
| Material | Aluminum alloy Worm wheel: Aluminum Bronze or Zinc Bronze Worm shaft: 20CrMn Ti Output Shaft: steel-45# |
| Packing | Carton, Honey Comb Carton, Wooden Case with wooden pallet |
| Warranty | 1 Year |
| Input Power | 0.09kw,0.18kw,1.1KW,1.5KW,2.2KW,3KW,4KW,5.5KW,7.5KW,11Kw and so on |
| Usages | Industrial Machine: Food Stuff, Ceramics, CHEMICAL, Packing, Dyeing,Wood working, Glass. |
| IEC Flange | IEC standard flange or on customer request |
| Lubricant | Synthetic oil or worm gear oil |
###
| Model: | NMRV25-150 |
| Ratio: | 1:7.5,10,15,20,25,30,40,50,60,80,100 |
| Color: | Blue/Silver Or On Customer Request |
| Material: | Housing: Die-Cast Aluminium Alloy |
| Worm Gear-Copper-10-3# | |
| Worm-20CrMnTi with carburizing and quenching, surface harness is 56-62HRC | |
| Shaft-chromium steel-45# | |
| Packing: | Carton and Wooden Case |
| Bearing: | C&U Bearing and equivalent Chinese brand |
| Input Power: | 0.06KW,0.09KW,0.12KW,0.18KW,0.22KW,0.25KW,0.37KW,0.55KW, 0.75KW,1.1KW,1.5KW,2.2KW,4KW,5.5KW,7.5KW |
| Usages: | Industrial Machine: Food processing, Ceramics, Conveyor, Packing, Dyeing, Woodworking, Glass. |
| IEC Flange: | 56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5, 100B14,112B5,112B14 |
| Lubricant: | Synthetic & Mineral |
###
| NMRV series gearbox high power gear speed reducer gearbox for wind | |
| Type | NMRV63 |
| Power | 0.06-7.5KW |
| Output Speed | 0.3-419RPM |
| Output Torque | 2.6-4596NM |
| Ratio | 7.5-5000 |
| Standard voltage and frequency | 380V&50HZ |
| Production time | 25-30DAYS |
| Advantages | 1.Compact structure, light weight, large torque and excellent performance. 2. Stable in running, low in noise, large in load, low in consumption, efficient in transmission, low in temperature and long in service life. |
| Service | 1 .Rich export experience more than 14 years 2 .Devote to transmission systematize solution more than 21 years experience 3. we passed CE &ISO9001&ISO14001 certified 4. 100% Payment protection 5. 100% Product quality protection 6.Provide consultation and after-sale,experienced engineers |
###
| Models | Rated Power | Rated Ratio | Input Hole Dia. | Input Shaft Dia. | Output Hole Dia. | Output Shaft Dia. |
| RV025 | 0.06KW~0.12KW | 5~60 | Φ9 | Φ9 | Φ11 | Φ11 |
| RV030 | 0.06KW~0.25KW | 5~80 | Φ9(Φ11) | Φ9 | Φ14 | Φ14 |
| RV040 | 0.09KW~0.55KW | 5~100 | Φ9(Φ11,Φ14) | Φ11 | Φ18(Φ19) | Φ18 |
| RV050 | 0.12KW~1.5KW | 5~100 | Φ11(Φ14,Φ19) | Φ14 | Φ25(Φ24) | Φ25 |
| RV063 | 0.18KW~2.2KW | 7.5~100 | Φ14(Φ19,Φ24) | Φ19 | Φ25(Φ28) | Φ25 |
| RV075 | 0.25KW~4.0KW | 7.5~100 | Φ14(Φ19,Φ24,Φ28) | Φ24 | Φ28(Φ35) | Φ28 |
| RV090 | 0.37KW~4.0KW | 7.5~100 | Φ19(Φ24,Φ28) | Φ24 | Φ35(Φ38) | Φ35 |
| RV110 | 0.55KW~7.5KW | 7.5~100 | Φ19(Φ24,Φ28,Φ38) | Φ28 | Φ42 | Φ42 |
| RV130 | 0.75KW~7.5KW | 7.5~100 | Φ24(Φ28,Φ38) | Φ30 | Φ45 | Φ45 |
| RV150 | 2.2KW~15KW | 7.5~100 | Φ28(Φ38,Φ42) | Φ35 | Φ50 | Φ50 |
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by czh 2023-01-14
China Right Angle Speed Transmission Worm Gear Box (GMRV/GRV/GMRV-E/GRV-E) worm gearbox design
Solution Description
Item Description
Main Components:
one)housing:aluminium alloy ADC12(dimensions 571-090) die forged iron HT200(dimensions a hundred and ten-one hundred fifty)
2)Worm:20Cr, ZI Involute profile carbonize&quencher warmth treatment method make equipment floor hardness up to 56-sixty two HRC Soon after precision grinding, carburization layer’s thickness between .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1
In depth Photographs
Blend Possibilities:
Input:with input shaft, With sq. flange,With IEC standard input flange
Output:with torque arm, output flange, solitary output shaft, double output shaft, plastic cover
Worm reducers are available with diffferent combos: NMRV+NMRV, NMRV+NRV, NMRV+Laptop, NMRV+UDL, NMRV+MOTORS
Exploded Look at:
Solution Parameters
| Previous Model |
New Model | Ratio | Center Distance | Electricity | Enter Dia. | Output Dia. | Output Torque | Weight |
| RV571 | 7.5~100 | 25mm | .06KW~.12KW | Φ9 | Φ11 | 21N.m | .7kgs | |
| RV030 | RW030 | 7.5~100 | 30mm | .06KW~.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
| RV040 | RW040 | seven.5~100 | 40mm | .09KW~.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
| RV050 | RW050 | seven.5~100 | 50mm | .12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~a hundred | 63mm | .18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | seven.5~a hundred | 75mm | .25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | 7.5~a hundred | 90mm | .37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | thirteen.0kgs |
| RV110 | RW110 | 7.5~100 | 110mm | .55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | seven.5~a hundred | 130mm | .75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
| RV150 | RW150 | seven.5~one hundred | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
GMRV Outline Dimension:
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | eighty | 97 | fifty four | forty four | 14 | fifty five | 32 | 56 | 63 | sixty five | 29 | 55 | 40 | fifty seven | 30 | 75 | 44 | six.5 | 21 | five.five | M6*ten(n=4) | 0° | five | sixteen.three | 27 |
| 040 | a hundred | 121.five | 70 | sixty | 18(19) | sixty | 43 | 71 | 78 | 75 | 36.five | 70 | 50 | seventy one.five | 40 | 87 | 55 | six.five | 26 | six.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | a hundred and twenty | one hundred forty four | 80 | 70 | 25(24) | 70 | forty nine | eighty five | ninety two | 85 | 43.5 | 80 | 60 | 84 | fifty | 100 | 64 | eight.5 | 30 | 7 | M8*12(n=4) | 45° | eight | 28.3(27.3) | 40 |
| 063 | 144 | 174 | a hundred | 85 | 25(28) | eighty | 67 | 103 | 112 | 95 | 53 | 95 | seventy two | 102 | 63 | 110 | eighty | eight.5 | 36 | 8 | M8*twelve(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | a hundred and twenty | ninety | 28(35) | 95 | seventy two | 112 | 120 | one hundred fifteen | 57 | 112.5 | 86 | 119 | seventy five | 140 | 93 | eleven | forty | ten | M8*fourteen(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | a hundred and forty | a hundred | 35(38) | 110 | seventy four | 130 | one hundred forty | one hundred thirty | sixty seven | 129.5 | 103 | a hundred thirty five | ninety | one hundred sixty | 102 | 13 | 45 | 11 | M10*sixteen(n=8) | 45° | ten | 38.3(41.3) | 70 |
| one hundred ten | 255 | 295 | 170 | one hundred fifteen | 42 | one hundred thirty | – | one hundred forty four | 155 | one hundred sixty five | 74 | one hundred sixty | 127.5 | 167.5 | 110 | 200 | a hundred twenty five | 14 | fifty | fourteen | M10*eighteen(n=8) | 45° | 12 | 45.three | eighty five |
| 130 | 293 | 335 | 200 | a hundred and twenty | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.five | one hundred thirty | 250 | 140 | 16 | 60 | fifteen | M12*twenty(n=8) | 45° | 14 | forty eight.8 | 100 |
| one hundred fifty | 340 | four hundred | 240 | one hundred forty five | 50 | one hundred eighty | – | 185 | 200 | 215 | ninety six | 210 | a hundred and seventy | 230 | a hundred and fifty | 250 | 180 | eighteen | 72.five | 18 | M12*22(n=8) | 45° | 14 | fifty three.8 | 120 |
Firm Profile
About CZPT Transmission:
We are a professional reducer producer found in HangZhou, ZHangZhoug province.
Our major merchandise is full assortment of RV571-a hundred and fifty worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Pc units, UDL Variators and AC Motors, G3 helical equipment motor.
Items are broadly employed for purposes these kinds of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-producing, development machinery, metallurgic mine, environmental safety engineering, and all kinds of automatic strains, and assembly traces.
With rapidly shipping and delivery, excellent following-sales service, innovative producing facility, our items market well both at property and abroad. We have exported our reducers to Southeast Asia, Japanese Europe and Middle East and so on.Our purpose is to create and innovate on basis of high quality, and create a good track record for reducers.
Packing details:Plastic Bags+Cartons+Picket Instances , or on request
We take part Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Earn Eurasia
Logistics
After Product sales Service
one.Maintenance Time and Warranty:Inside 1 yr following getting merchandise.
2.Other Provider: Including modeling selection guidebook, installation guidebook, and difficulty resolution information, etc.
FAQ
1.Q:Can you make as for each client drawing?
A: Of course, we provide custom-made services for customers appropriately. We can use customer’s nameplate for gearboxes.
2.Q:What is your conditions of payment ?
A: 30% deposit just before generation,harmony T/T before supply.
3.Q:Are you a trading company or maker?
A:We are a manufacurer with advanced products and experienced personnel.
4.Q:What is your manufacturing potential?
A:8000-9000 PCS/Month
five.Q:Cost-free sample is offered or not?
A:Sure, we can offer free of charge sample if client agree to spend for the courier cost
6.Q:Do you have any certification?
A:Of course, we have CE certification and SGS certification report.
Contact details:
Ms Lingel Pan
For any concerns just come to feel cost-free ton get in touch with me. Numerous many thanks for your sort focus to our company!
|
US $10-220 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Right Angle |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Double-Step |
###
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Old Model |
New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
| RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
| RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
| RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
| RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
| RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
| RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
|
US $10-220 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Right Angle |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Double-Step |
###
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Old Model |
New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
| RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
| RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
| RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
| RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
| RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
| RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
Worm gear reducer gearbox
A worm gear reducer gearbox is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.
Viscosity
A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer gearbox increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer gearbox. A worm gear reducer gearbox with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.
Self-locking function
Worm reducer gearboxes have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducer gearboxes is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducer gearboxes, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducer gearboxes are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer gearbox more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
application
The worm gear reducer gearbox market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducer gearboxes can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducer gearboxes are the most popular type of reducer gearbox. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.
cost
The cost of a worm gear reducer gearbox depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer gearbox market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer gearbox is a popular type of reducer gearbox. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer gearbox in multiple installation locations.
Another application for worm gear reducer gearboxes is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer gearbox is determined by several factors. Size and material are important. Worm gear reducer gearboxes can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
manufacturing
Agknx Transmission Ltd. manufactures premium worm gear reducer gearboxes with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer gearbox also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
editor by czh 2023-01-04
China NEMA Gearbox Motor Drive Wheel Winch Box Best Assembly Right Angle Nmrv Stainless Steel NEMA Interchange Transmission Parts Industrial Small Worm NEMA Gearbox worm gearbox design
Product Description
Nema Gearbox Motor Travel Wheel Winch Box Best Assembly Right Angle Nmrv Stainless Metal NEMA Interchange Transmission Elements Industrial Modest Worm Nema Gearbox
Wormwheel gearboxes go by many names, like 90-diploma gearboxes, appropriate angle gearboxes, speed reducers, worm gear reducers and worm push gearboxes. Equipment reduction boxes feature a equipment arrangement in which a gear in the type of a screw, also acknowledged as a worm, meshes with a worm gear. These gears are normally made from bronze and the worms are steel or stainless steel.
Product description
Dimensions:ten:one
Nema23 Worm Equipment Stepper Motor Gearbox Ratio 7.5:1 ten:1 twenty:1 30:1 50:1 L76mm 3A 1.8Nm Motor for CNC
Package deal Integrated :
1 x Nema23 L76mm Stepper Motor
1 x Gearbox
Merchandise Specifications :
4 wires : Blue , Black , Environmentally friendly , Crimson
Action Angle : 1.8degree
Holding Torque : 1.8Nm
Existing : 3A
Equipment Ratio : 7.5:1, 10:1, 20:1, 30:1, fifty:one
Motor Size : L76mm
|
US $10-99 / Piece | |
100 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Soft Tooth Surface |
| Installation: | 90 Degree |
| Layout: | Coaxial |
| Gear Shape: | Conical – Cylindrical Gear |
| Step: | Stepless |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
|
US $10-99 / Piece | |
100 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Soft Tooth Surface |
| Installation: | 90 Degree |
| Layout: | Coaxial |
| Gear Shape: | Conical – Cylindrical Gear |
| Step: | Stepless |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
Choosing a Gearbox For Your Application
The gearbox is an essential part of bicycles. It is used for several purposes, including speed and force. A gearbox is used to achieve one or both of these goals, but there is always a trade-off. Increasing speed increases wheel speed and forces on the wheels. Similarly, increasing pedal force increases the force on the wheels. This makes it easier for cyclists to accelerate their bicycles. However, this compromise makes the gearbox less efficient than an ideal one.
Dimensions
Gearboxes come in different sizes, so the size of your unit depends on the number of stages. Using a chart to determine how many stages are required will help you determine the dimensions of your unit. The ratios of individual stages are normally greater at the top and get smaller as you get closer to the last reduction. This information is important when choosing the right gearbox for your application. However, the dimensions of your gearbox do not have to be exact. Some manufacturers have guides that outline the required dimensions.
The service factor of a gearbox is a combination of the required reliability, the actual service condition, and the load that the gearbox will endure. It can range from 1.0 to 1.4. If the service factor of a gearbox is 1.0, it means that the unit has just enough capacity to meet your needs, but any extra requirements could cause the unit to fail or overheat. However, service factors of 1.4 are generally sufficient for most industrial applications, since they indicate that a gearbox can withstand 1.4 times its application requirement.
Different sizes also have different shapes. Some types are concentric, while others are parallel or at a right angle. The fourth type of gearbox is called shaft mount and is used when mounting the gearbox by foot is impossible. We will discuss the different mounting positions later. In the meantime, keep these dimensions in mind when choosing a gearbox for your application. If you have space constraints, a concentric gearbox is usually your best option.
Construction
The design and construction of a gearbox entails the integration of various components into a single structure. The components of a gearbox must have sufficient rigidity and adequate vibration damping properties. The design guidelines note the approximate values for the components and recommend the production method. Empirical formulas were used to determine the dimensions of the various components. It was found that these methods can simplify the design process. These methods are also used to calculate the angular and axial displacements of the components of the gearbox.
In this project, we used a 3D modeling software called SOLIDWORKS to create a 3-D model of a gear reducer. We used this software to simulate the structure of the gearbox, and it has powerful design automation tools. Although the gear reducer and housing are separate parts, we model them as a single body. To save time, we also removed the auxiliary elements, such as oil inlets and oil level indicators, from the 3D model.
Our method is based on parameter-optimized deep neural networks (DBNs). This model has both supervised and unsupervised learning capabilities, allowing it to be self-adaptive. This method is superior to traditional methods, which have poor self-adaptive feature extraction and shallow network generalization. Our algorithm is able to recognize faults in different states of the gearbox using its vibration signal. We have tested our model on two gearboxes.
With the help of advanced material science technologies, we can now manufacture the housing for the gearbox using high-quality steel and aluminium alloys. In addition, advanced telematics systems have increased the response time of manufacturers. These technologies are expected to create tremendous opportunities in the coming years and fuel the growth of the gearbox housing market. There are many different ways to construct a gearbox, and these techniques are highly customizable. In this study, we will consider the design and construction of various gearbox types, as well as their components.
Working
A gearbox is a mechanical device that transmits power from one gear to another. The different types of gears are called planetary gears and are used in a variety of applications. Depending on the type of gearbox, it may be concentric, parallel, or at a right angle. The fourth type of gearbox is a shaft mount. The shaft mount type is used in applications that cannot be mounted by foot. The various mounting positions will be discussed later.
Many design guidelines recommend a service factor of 1.0, which needs to be adjusted based on actual service conditions. This factor is the combined measure of external load, required reliability, and overall gearbox life. In general, published service factors are the minimum requirements for a particular application, but a higher value is necessary for severe loading. This calculation is also recommended for high-speed gearboxes. However, the service factor should not be a sole determining factor in the selection process.
The second gear of a pair of gears has more teeth than the first gear. It also turns slower, but with greater torque. The second gear always turns in the opposite direction. The animation demonstrates this change in direction. A gearbox can also have more than one pair of gears, and a first gear may be used for the reverse. When a gear is shifted from one position to another, the second gear is engaged and the first gear is engaged again.
Another term used to describe a gearbox is “gear box.” This term is an interchangeable term for different mechanical units containing gears. Gearboxes are commonly used to alter speed and torque in various applications. Hence, understanding the gearbox and its parts is essential to maintaining your car’s performance. If you want to extend the life of your vehicle, be sure to check the gearbox’s efficiency. The better its functioning, the less likely it is to fail.
Advantages
Automatic transmission boxes are almost identical to mechanical transmission boxes, but they also have an electronic component that determines the comfort of the driver. Automatic transmission boxes use special blocks to manage shifts effectively and take into account information from other systems, as well as the driver’s input. This ensures accuracy and positioning. The following are a few gearbox advantages:
A gearbox creates a small amount of drag when pedaling, but this drag is offset by the increased effort to climb. The external derailleur system is more efficient when adjusted for friction, but it does not create as little drag in dry conditions. The internal gearbox allows engineers to tune the shifting system to minimize braking issues, pedal kickback, and chain growth. As a result, an internal gearbox is a great choice for bikes with high-performance components.
Helical gearboxes offer some advantages, including a low noise level and lower vibration. They are also highly durable and reliable. They can be extended in modular fashion, which makes them more expensive. Gearboxes are best for applications involving heavy loads. Alternatively, you can opt for a gearbox with multiple teeth. A helical gearbox is more durable and robust, but it is also more expensive. However, the benefits far outweigh the disadvantages.
A gearbox with a manual transmission is often more energy-efficient than one with an automatic transmission. Moreover, these cars typically have lower fuel consumption and higher emissions than their automatic counterparts. In addition, the driver does not have to worry about the brakes wearing out quickly. Another advantage of a manual transmission is its affordability. A manual transmission is often available at a lower cost than its automatic counterpart, and repairs and interventions are easier and less costly. And if you have a mechanical problem with the gearbox, you can control the fuel consumption of your vehicle with appropriate driving habits.
Application
While choosing a gearbox for a specific application, the customer should consider the load on the output shaft. High impact loads will wear out gear teeth and shaft bearings, requiring higher service factors. Other factors to consider are the size and style of the output shaft and the environment. Detailed information on these factors will help the customer choose the best gearbox. Several sizing programs are available to determine the most appropriate gearbox for a specific application.
The sizing of a gearbox depends on its input speed, torque, and the motor shaft diameter. The input speed must not exceed the required gearbox’s rating, as high speeds can cause premature seal wear. A low-backlash gearbox may be sufficient for a particular application. Using an output mechanism of the correct size may help increase the input speed. However, this is not recommended for all applications. To choose the right gearbox, check the manufacturer’s warranty and contact customer service representatives.
Different gearboxes have different strengths and weaknesses. A standard gearbox should be durable and flexible, but it must also be able to transfer torque efficiently. There are various types of gears, including open gearing, helical gears, and spur gears. Some of the types of gears can be used to power large industrial machines. For example, the most popular type of gearbox is the planetary drive gearbox. These are used in material handling equipment, conveyor systems, power plants, plastics, and mining. Gearboxes can be used for high-speed applications, such as conveyors, crushers, and moving monorail systems.
Service factors determine the life of a gearbox. Often, manufacturers recommend a service factor of 1.0. However, the actual value may be higher or lower than that. It is often useful to consider the service factor when choosing a gearbox for a particular application. A service factor of 1.4 means that the gearbox can handle 1.4 times the load required. For example, a 1,000-inch-pound gearbox would need a 1,400-inch-pound gearbox. Service factors can be adjusted to suit different applications and conditions.
editor by czh 2022-12-16
China Nmrv Gear Motor Unit Ratio5~100 Transmission Worm Speed Reducer 180W 1.1kw 2.2kw 7.5kw Copper Wheel Right Angle Gearbox worm gearbox application
Item Description
Nmrv Equipment Motor Device Ratio5~100 Transmission Worm Pace Reducer 180W 1.1KW 2.2KW 7.5KW Copper Wheel Appropriate Angle Gearbox
Features:
one. Mild in fat and non-rusting
2. Sleek in managing, can operate a extended time in dreadful problems
3. Large efficiency, low noise
4. Very good-looking in look, resilient in provider lifestyle, and little in volume
Solution photograph:
Specification for worm gearbox:
| Design | 571 ~ a hundred and fifty |
| Power | .06kw ~ 15kw |
| Enter speed | 750rpm ~ 2000rpm |
| Reduction ratio | one/5 ~ 1/a hundred |
| Enter motor | AC (1 stage or 3 period) / DC / BLDC / Stepper / Servo |
| Output shaft | Reliable shaft / Hollow shaft / Output flange… |
| Dimension common | Metric dimensions / Inch dimensions |
| Content of housing | die-forged aluminum / Solid iron / Stainless metal |
| Components | Flange / Sound shaft / Torque arm / Go over … |
FAQ
Q: Can you make the gearbox with customization?
A: Of course, we can customize for each your ask for, like flange, shaft, configuration, material, etc.
Q: Do you provide samples?
A: Indeed. The sample is accessible for tests.
Q: What is your MOQ?
A: It is 10pcs for the beginning of our business.
Q: What is actually your direct time?
A: Standard merchandise require 5-30days, a little bit lengthier for customized items.
Q: Do you supply technical assist?
A: Sure. Our company have design and style and development team, we can provide specialized help if you
require.
Q: How to ship to us?
A: It is available by air, or by sea, or by train.
Q: How to pay the money?
A: T/T and L/C are desired, with a various currency, which includes USD, EUR, RMB, and many others.
Q: How can I know the merchandise is appropriate for me?
A: >1ST validate drawing and specification >2nd check sample >3rd start mass production.
Q: Can I arrive to your company to visit?
A: Yes, you are welcome to check out us at any time.
Q: How shall we contact you?
A: You can send an inquiry directly, and we will reply within 24 hrs.
|
US $15-25 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Single-Step |
| Type: | Worm Gear Box |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | 025 ~ 150 |
| Power | 0.06kw ~ 15kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/5 ~ 1/100 |
| Input motor | AC (1 phase or 3 phase) / DC / BLDC / Stepper / Servo |
| Output shaft | Solid shaft / Hollow shaft / Output flange… |
| Dimension standard | Metric size / Inch size |
| Material of housing | die-cast aluminum / Cast iron / Stainless steel |
| Accessories | Flange / Solid shaft / Torque arm / Cover … |
|
US $15-25 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Single-Step |
| Type: | Worm Gear Box |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | 025 ~ 150 |
| Power | 0.06kw ~ 15kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/5 ~ 1/100 |
| Input motor | AC (1 phase or 3 phase) / DC / BLDC / Stepper / Servo |
| Output shaft | Solid shaft / Hollow shaft / Output flange… |
| Dimension standard | Metric size / Inch size |
| Material of housing | die-cast aluminum / Cast iron / Stainless steel |
| Accessories | Flange / Solid shaft / Torque arm / Cover … |
How to Select a Gearbox
When you drive your vehicle, the gearbox provides you with traction and speed. The lower gear provides the most traction, while the higher gear has the most speed. Selecting the right gear for your driving conditions will help you maximize both. The right gearing will vary based on road conditions, load, and speed. Short gearing will accelerate you more quickly, while tall gearing will increase top speed. However, you should understand how to use the gearbox before driving.
Function
The function of the gearbox is to transmit rotational energy to the machine’s drive train. The ratio between input and output torque is the ratio of the torque to the speed of rotation. Gearboxes have many different functions. A gearbox may have multiple functions or one function that is used to drive several other machines. If one gear is not turning, the other will be able to turn the gearbox. This is where the gearbox gets its name.
The pitch-controlled system has an equal number of failure modes as the electrical system, accounting for a large proportion of the longest machine downtime and halt time. The relationship between mechanisms and faults is not easily modeled mathematically. Failure modes of gearboxes are shown in Fig. 3. A gearbox’s true service life is six to eight years. However, a gearbox’s fault detection process must be developed as mature technology is required to reduce the downtime and avoid catastrophic incidents.
A gearbox is a vital piece of machinery. It processes energy produced by an engine to move the machine’s parts. A gearbox’s efficiency depends on how efficiently it transfers energy. The higher the ratio, the more torque is transferred to the wheels. It is a common component of bicycles, cars, and a variety of other devices. Its four major functions include:
In addition to ensuring gearbox reliability, a gearbox’s maintainability should be evaluated in the design phase. Maintainability considerations should be integrated into the gearbox design, such as the type of spare parts available. An appropriate maintenance regime will also determine how often to replace or repair specific parts. A proper maintenance procedure will also ensure that the gearbox is accessible. Whether it is easy to access or difficult to reach, accessibility is essential.
Purpose
A car’s transmission connects the engine to the wheels, allowing a higher-speed crankshaft to provide leverage. High-torque engines are necessary for the vehicle’s starting, acceleration, and meeting road resistance. The gearbox reduces the engine’s speed and provides torque variations at the wheels. The transmission also provides reversing power, making it possible to move the vehicle backwards and forwards.
Gears transmit power from one shaft to another. The size of the gears and number of teeth determine the amount of torque the unit can transmit. A higher gear ratio means more torque, but slower speed. The gearbox’s lever moves the engaging part on the shaft. The lever also slides the gears and synchronizers into place. If the lever slips to the left or right, the engine operates in second gear.
Gearboxes need to be closely monitored to reduce the likelihood of premature failure. Various tests are available to detect defective gear teeth and increase machine reliability. Figure 1.11(a) and (b) show a gearbox with 18 teeth and a 1.5:1 transmission ratio. The input shaft is connected to a sheave and drives a “V” belt. This transmission ratio allows the gearbox to reduce the speed of the motor, while increasing torque and reducing output speed.
When it comes to speed reduction, gear box is the most common method for reducing motor torque. The torque output is directly proportional to the volume of the motor. A small gearbox, for example, can produce as much torque as a large motor with the same output speed. The same holds true for the reverse. There are hybrid drives and in-line gearboxes. Regardless of the type, knowing about the functions of a gearbox will make it easier to choose the right one for your specific application.
Application
When selecting a gearbox, the service factor must be considered. Service factor is the difference between the actual capacity of the gearbox and the value required by the application. Additional requirements for the gearbox may result in premature seal wear or overheating. The service factor should be as low as possible, as it could be the difference between the lifetime of the gearbox and its failure. In some cases, a gearbox’s service factor can be as high as 1.4, which is sufficient for most industrial applications.
China dominates the renewable energy industry, with the largest installed capacity of 1000 gigawatts and more than 2000 terawatt hours of electricity generated each year. The growth in these sectors is expected to increase the demand for gearboxes. For example, in China, wind and hydropower energy production are the major components of wind and solar power plants. The increased installation capacity indicates increased use of gearboxes for these industries. A gearbox that is not suitable for its application will not be functional, which may be detrimental to the production of products in the country.
A gearbox can be mounted in one of four different positions. The first three positions are concentric, parallel, or right angle, and the fourth position is shaft mount. A shaft mount gearbox is typically used in applications where the motor can’t be mounted via a foot. These positions are discussed in more detail below. Choosing the correct gearbox is essential in your business, but remember that a well-designed gearbox will help your bottom line.
The service factor of a gearbox is dependent on the type of load. A high shock load, for example, can cause premature failure of the gear teeth or shaft bearings. In such cases, a higher service factor is required. In other cases, a gearbox that is designed for high shock loads can withstand such loads without deteriorating its performance. Moreover, it will also reduce the cost of maintaining the gearbox over time.
Material
When choosing the material for your gearbox, you must balance the strength, durability, and cost of the design. This article will discuss the different types of materials and their respective applications and power transmission calculations. A variety of alloys are available, each of which offers its own advantages, including improved hardness and wear resistance. The following are some of the common alloys used in gears. The advantage of alloys is their competitive pricing. A gear made from one of these materials is usually stronger than its counterparts.
The carbon content of SPCC prevents the material from hardening like SS. However, thin sheets made from SPCC are often used for gears with lower strength. Because of the low carbon content, SPCC’s surface doesn’t harden as quickly as SS gears do, so soft nitriding is needed to provide hardness. However, if you want a gear that won’t rust, then you should consider SS or FCD.
In addition to cars, gearboxes are also used in the aerospace industry. They are used in space travel and are used in airplane engines. In agriculture, they are used in irrigation, pest and insect control machinery, and plowing machines. They are also used in construction equipment like cranes, bulldozers, and tractors. Gearboxes are also used in the food processing industry, including conveyor systems, kilns, and packaging machinery.
The teeth of the gears in your gearbox are important when it comes to performance. A properly meshing gear will allow the gears to achieve peak performance and withstand torque. Gear teeth are like tiny levers, and effective meshing reduces stress and slippage. A stationary parametric analysis will help you determine the quality of meshing throughout the gearing cycle. This method is often the most accurate way to determine whether your gears are meshing well.
Manufacturing
The global gear market is divided into five key regions, namely, North America, Europe, Asia Pacific, and Latin America. Among these regions, Asia Pacific is expected to generate the largest GDP, owing to rapidly growing energy demand and investments in industrial infrastructure. This region is also home to some of the largest manufacturing bases, and its continuous building of new buildings and homes will support the industry’s growth. In terms of application, gearboxes are used in construction, agricultural machinery, and transportation.
The Industrial Gearbox market is anticipated to expand during the next several years, driven by the rapid growth of the construction industry and business advancements. However, there are several challenges that hamper the growth of the industry. These include the high cost of operations and maintenance of gear units. This report covers the market size of industrial gearboxes globally, as well as their manufacturing technologies. It also includes manufacturer data for the period of 2020-2024. The report also features a discussion of market drivers and restraints.
Global health crisis and decreasing seaborne commerce have moderately adverse effects on the industry. Falling seaborne commerce has created a barrier to investment. The value of international crude oil is expected to cross USD 0 by April 2020, putting an end to new assets development and exploitation. In such a scenario, the global gearbox market will face many challenges. However, the opportunities are huge. So, the market for industrial gearboxes is expected to grow by more than 6% by 2020, thanks to the increasing number of light vehicles sold in the country.
The main shaft of a gearbox, also known as the output shaft, spins at different speeds and transfers torque to an automobile. The output shaft is splined so that a coupler and gear can be connected to it. The counter shaft and primary shaft are supported by bearings, which reduce friction in the spinning element. Another important part of a gearbox is the gears, which vary in tooth count. The number of teeth determines how much torque a gear can transfer. In addition, the gears can glide in any position.
editor by czh 2022-11-26
in Mekele Ethiopia sales price shop near me near me shop factory supplier Nmrv Right Angle Square Stainless Steel Reduction Worm Gearbox manufacturer best Cost Custom Cheap wholesaler
Entire use has been manufactured of all kinds of sophisticated tactics and technology to get to excelsior manufacturing. We have exported our merchandise to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the Usa, Canada, and so on. our products are selling well in the American, European, South American and Asian markets. NMRV RigEPT Angle Sq. Stainless Metal Reduction Worm EPT
Characteristics:
1. LigEPT in weigEPT and non-rusting
2. Clean in operating, can work EPT time in dreadful situations
three. Large performance, lower sounds
four. Very good-seeking in visual appeal, durable in service life and little in volume
Solution picture:
Specification for worm EPT:
| Model | 030 ~ 063 |
| EPT | .06kw ~ 4kw |
| Input pace | 750rpm ~ 2000rpm |
| Reduction ratio | 1/five ~ 1/100 |
| Enter motor | AC (1 section or three phase) / DC / BLDC / Stepper / Servo |
| Output shaft | Strong shaft / Hollow shaft / Output flange #8230 |
| Dimension stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd | Metric measurement / Inch dimensions |
| EPT of housing | die-cast EPT / Solid iron / Stainless metal |
| Add-ons | Flange / Reliable shaft / Torque arm / EPT #8230 |
FAQ
Q: Can you make the EPT with customization?
A: Indeed, we can customize for each your ask for, like flange, shaft, configuration, substance, and so forth.
Q: Do you supply samples?
A: Sure. Sample is obtainable for tests.
Q: What is your MOQ?
A: It is 10pcs for the starting of our company.
Q: What is your guide time?
A: StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd merchandise require 5-30days, a bit EPTer for customized merchandise.
Q: Do you offer EPT support?
A: Indeed. Our firm have style and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment crew, we can supply EPT assist if you
require.
Q: How to ship to us?
A: It is offered by air, or by sea, or by prepare.
Q: How to pay out the money?
A: T/T and L/C is desired, with distinct forex, incXiHu (West Lake) Dis.Hu (West Lake) Dis. USD, EUR, RMB, and so forth.
Q: How can I know the product is appropriate for me?
A: gt1ST verify drawing and specification gt2nd take a look at sample gt3rd commence mass generation.
Q: Can I appear to your business to visit?
A: Yes, you are welcome to visit us at any time.
Q: How shall we make contact with you?
A: You can ship inquiry straight, and we will reply in 24 several hours.
EPT worm gear reducer wpa near me China in Astana Kazakhstan Right Angle Helical Gear Planetary Gearbox for Robot Arm for Security Monitor with top quality
We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
P ept SERIES
PRODUCTS FEATURES:
(1) Low Noise:Under 65db.
(2) Low Backlash:Backlash is under 3 arcmin . Backlash for 2-stage speed reduction is with in 5 arcmin.
(3) High Efficiency:1-stage up to 95% or more,2-stage up to 92% or more.
(4) High Input Speed:Input speed allows for up to 8000RPM.
(5) High Torque:High torque output than that of conventional planetary gear reducers
(6) Maintenance-Free:Low grease wear,can be lifetime lubrication
(7) High Speed Reduction Ratio:Speed ratio is over 1/1000.
ADVANTAGE:
USAGE:
- Aerospace,military industry.
- Medical health,electronic information industry.
- ept robots,Production automation,CNC machine tool manufacturing industry.
- Motor,Textile,Printing,Food,Metallurgical.
- Environmental protection engineering,Warehouse logistics industry.
MODEL ILLUMINATE:
GEAR BOX PERFORMANCE INFORMATION:
| MODUL NO. | STAGE | RATIO¹ | PGRH42 | PGRH60 | PGRH90 | PGRH115 | PGRH142 | PGRH180 | PGRH220 | |
| Rated output torque T2N | Nm | 1 | 3 | 20 | 55 | 130 | 208 | 342 | 588 | 1,140 |
| 4 | 19 | 50 | 140 | 290 | 542 | 1,050 | 1,700 | |||
| 5 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 6 | 20 | 55 | 150 | 310 | 600 | 1,100 | 1,900 | |||
| 7 | 19 | 35 | 140 | 300 | 550 | 1,100 | 1,800 | |||
| 8 | 17 | 35 | 120 | 260 | 500 | 1,000 | 1,600 | |||
| 10 | 14 | 37 | 95 | 220 | 370 | 800 | 1,220 | |||
| 14 | – | 35 | 140 | 300 | 550 | 1,100 | 1,800 | |||
| 20 | – | 37 | 95 | 220 | 370 | 800 | 1,220 | |||
| 2 | 15 | 20 | 50 | 130 | 208 | 342 | 588 | 1,140 | ||
| 20 | 19 | 60 | 140 | 290 | 542 | 1,050 | 1,700 | |||
| 25 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 30 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 35 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 40 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 50 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 60 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 70 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 80 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 100 | 22 | 60 | 95 | 220 | 370 | 800 | 1,220 | |||
| 120 | – | – | 150 | 310 | 600 | 1,100 | 1,900 | |||
| 140 | – | – | 140 | 300 | 550 | 1,100 | 1,800 | |||
| 160 | – | – | 120 | 260 | 500 | 1,000 | 1,600 | |||
| 200 | – | – | 48 | 140 | 370 | 520 | 1,220 | |||
| MAX. output torqueT2B | Nm | 1,2 | 3~200 | 3 times of Nominal Output Torque | ||||||
| Rated input speed n1 | rpm | 1,2 | 3~200 | 5,000 | 5,000 | 4,000 | 4,000 | 3,000 | 3,000 | 2,000 |
| MAX.input speed n1B | rpm | 1,2 | 3~200 | 10,000 | 10,000 | 8,000 | 8,000 | 6,000 | 6,000 | 4,000 |
| Micro Backlash P0 | arcmin | 1 | 3~20 | – | – | ≤2 | ≤2 | ≤2 | ≤2 | ≤2 |
| 2 | 15~200 | – | – | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ||
| Precision Backlash P1 | arcmin | 1 | 3~20 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 |
| 2 | 15~200 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ||
| Standard Backlash P2 | arcmin | 1 | 3~20 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 |
| 2 | 15~200 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ||
| Torsional stiffness | Nm/arcmin | 1,2 | 3~200 | 3 | 7 | 14 | 25 | 50 | 145 | 225 |
| Max.radial force F2rB² | N | 1,2 | 3~200 | 780 | 1,530 | 3,250 | 6,700 | 9,400 | 14,500 | 50,000 |
| MAX.axial force F2a1B² | N | 1,2 | 3~200 | 350 | 630 | 1,300 | 3,000 | 4,000 | 6,200 | 35,000 |
| MAX.axial force F2a2B² | N | 1,2 | 3~200 | 390 | 765 | 1,625 | 3,350 | 4,700 | 7,250 | 25,000 |
| Service life | hr | 1,2 | 3~200 | 20,000* | ||||||
| Work efficiency η | % | 1 | 3~20 | ≥97 | ||||||
| 2 | 15~200 | ≥94 | ||||||||
| Weight | kg | 1 | 3~20 | 0.9 | 2.1 | 6.4 | 13 | 24.5 | 51 | 83 |
| 2 | 15~200 | 1.2 | 1.5 | 7.8 | 14.2 | 27.5 | 54 | 95 | ||
| Operating temperature | ºC | 1,2 | 3~200 | -10ºC~+90ºC | ||||||
| Lubrication | 1,2 | 3~200 | Synthetic lubricating oil | |||||||
| Protection level | 1,2 | 3~200 | IP65 | |||||||
| Installation direction | 1,2 | 3~200 | Any direction | |||||||
| Noise level(n1=3000rpm) | dB | 1,2 | 3~200 | ≤61 | ≤63 | ≤65 | ≤68 | ≤70 | ≤72 | ≤74 |
OUTLINE DIMENSION:
COMPANY VIEW:
HangZhou Qiandeyi Mechanical & Electrical Co., Ltd. is a subsidiary of ZheJiang Jun Yi Machinery. Jun Yi Machinery was founded in March 1972. The company specializes in the design, development and production of high-tech various geared motors and helical gear reducers, worm and worm gear reducers and planetary reducers. Our products sold to more than 30 countries around the world and win good reputation and numerous awards in the overseas market for many years. In recent years, to achieve global production and provide excellent service,we set up subsidiary of production of planetary gear reducer in China.
History:
1972:ZheJiang Jun Yi Machinery is founded.
1989:It established a overseas branch company ATRUMP MACHINERY INC in Los Angeles
1995:Pass the ISO9002 Commodity certification.
2003:Pass the ISO9001 quality certification and the European CE standard test which enabled the products to be sold in Europe
2013:The company set up subsidiary in China to achieve global production.
FACTORY:
Wisdom Made In ATG,Wisdom The World.
EQUIPMENT:
INSPECTION EQUIPMENT:
FAQ:
(1) Can I be your agent?
Yes, welcome to deep cooperation. We have big promotion of ATG brand in the market now. For the details please contact me.
(2) Is OEM available?
Yes, OEM is available. We have professional designer to help your brand promotion.
(3) How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Free for the samples, but you need to pay for the freight.
(4)What’s your quality guarantee?
We have different kinds of products which can meet different quality standard.
Our QC department will test products before shipping. We have 100% quality guarantee to customers. We will be responsible for any quality problem.
(5) How about the delivery time?
The delivery time is depending on the products and the quantity. But generally, the delivery time for a container is about one month.
Welcome to our company.
If any problem, feel free to leave message on the bottom of this page.
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
