Product Description
§§ Overview
SIMOGEAR helical geared motors
Features
- High range of transmission ratios (plug-on pinion)
- Very economic performance
- Very energy efficient (efficiencies of 98 % per stage)
- High power range
Mechanical construction
- Stages: 1, 2 or 3
- Mounting types: foot-mounted and flange-mounted designs, housing flange
- Shaft design: CZPT shaft
Transmission stages
• 2-stage or 3-stage helical geared motors
• 1-stage helical geared motors for high output speeds
• 4-stage to 6-stage helical geared motors for very low output speeds
Typical applications
- Conveyor belt
- Transport of packaged goods
- Vertical conveyor
Technical data
§§ About new SIMOGEAR geared motors
The SIMOGEAR geared motor delivers performance from 0.09 kW up to 55 kW. It can achieve a gear unit torque up to 19 500 Nm with helical, parallel shaft, bevel, helical worm and worm geared motors Due to accordance to the current measures, SIMOGEAR is compatible to many other suppliers of geared motors.
• SIMOGEAR geared motors are the new generation of geared motors from Siemens.
• SIMOGEAR geared motors can be obtained as helical geared motors, parallel shaft geared motors, bevel geared motors and helical worm geared motors.
• The fine-tuned sizes of the SIMOGEAR gearboxes offer you the right drive regarding the gearbox type, output nominal torque and ratio.
• SIMOGEAR geared motors stand out especially due to their energy efficiency, compactness and their little weight.
• State-of-the-art production technology and improved testing methods ensure the highest degree of quality and reliability.
§§ Gearbox type
§§ Advantages at a glance
• Based on an optimum design principle on the gear unit side, and by using new, energy-efficient motors, SIMOGEAR plays a role in reducing the energy costs of your plant or system
• As a result of the finely scaled portfolio, you only pay for the power rating that you actually require
• As a result of the compact dimensions, SIMOGEAR can even be integrated into the smallest spaces
| Application: | Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Coaxial |
| Gear Shape: | Bevel Gear |
| Step: | Double-Step |
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
A-Drive PWC single worm reducer gearbox
A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.
Agknx driver
Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H
X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle
RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
AGknx Single
Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single
If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
AGknx X & H
The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.
editor by CX 2023-06-08
China Wpa Wpo Wps Wpx Right Angle Foot Mounted Worm Reducer Gear Unit Gear Box worm gearbox application
Item Description
Wpa Wpo Wps Wpx Proper Angle Foot Mounted Worm Reducer Equipment Unit Gear Box
Functions:
one. Compact composition and simple assembly
two. Wide pace ranges and substantial torque
3. Reduced noise, great sealing efficiency, large efficiency
four. Stable and risk-free, long lifetime, common
five. Multi-construction, various assembling approaches
Product image:
Specification:
| ANG WP Worm Pace Equipment Unit | |
| Product | WPA WPS WPDA WPDS WPO WPX… |
| Size | forty-250(one phase) |
| Input energy | .12kw ~ 33kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/10 ~ 1/sixty(single stage) |
| Input motor | AC (1 stage or 3 phase) / DC motor |
| Output torque | six-6050Nm |
| Put in type | Foot / CZPT shaft / Hollow shaft… |
| Material of housing | Die-forged iron |
| Application | Foodstuff Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, etc. |
FAQ
Q: Can you make the equipment device with customization?
A: Sure, we can personalize for every your ask for, like flange, shaft, configuration, material, and many others.
Q: Do you provide samples?
A: Of course. Sample is available for tests.
Q: What is your MOQ?
A: It is 10pcs for the beginning of our company.
Q: What is your lead time?
A: Standard item want 5-30days, a little bit more time for personalized items.
Q: Do you offer technologies support?
A: Indeed. Our company have design and style and development staff, we can supply engineering help if you
need.
Q: How to ship to us?
A: It is accessible by air, or by sea, or by practice.
Q: How to pay out the cash?
A: T/T and L/C is chosen, with different currency, like USD, EUR, RMB, and many others.
Q: How can I know the solution is suitable for me?
A: >1ST verify drawing and specification >2nd test sample >3rd commence mass production.
Q: Can I arrive to your business to pay a visit to?
A: Of course, you are welcome to check out us at any time.
Q: How shall we make contact with you?
A: You can send inquiry directly, and we will answer within 24 hrs.
|
/ Piece | |
1 Piece (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) 1pcs
|
|---|
###
| Customization: |
|---|
###
| ANG WP Worm Speed Gear Unit | |
| Model | WPA WPS WPDA WPDS WPO WPX… |
| Size | 40-250(single stage) |
| Input power | 0.12kw ~ 33kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/10 ~ 1/60(single stage) |
| Input motor | AC (1 phase or 3 phase) / DC motor |
| Output torque | 6-6050Nm |
| Install type | Foot / Solid shaft / Hollow shaft… |
| Material of housing | Die-cast iron |
| Application | Food Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, etc. |
|
/ Piece | |
1 Piece (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) 1pcs
|
|---|
###
| Customization: |
|---|
###
| ANG WP Worm Speed Gear Unit | |
| Model | WPA WPS WPDA WPDS WPO WPX… |
| Size | 40-250(single stage) |
| Input power | 0.12kw ~ 33kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/10 ~ 1/60(single stage) |
| Input motor | AC (1 phase or 3 phase) / DC motor |
| Output torque | 6-6050Nm |
| Install type | Foot / Solid shaft / Hollow shaft… |
| Material of housing | Die-cast iron |
| Application | Food Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, etc. |
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by CX 2023-03-27
China One or Multi Step Wafer Butterfly Hand Wheel Electric Hydraulic Worm Gear Unit Ball Plug Valve Operator Actuator Gearbox manufacturer
Merchandise Description
One Or Multi Stage Wafer Butterfly Hand Wheel electric hydraulic Worm Equipment Device Ball plug Valve Operator Actuator Gearbox
Worm Gear Valve Actuator is a 90° rotary gear operator ideal for use on ball valves, butterfly valves, and plug valves with a guide, electric or hydraulic actuator.
Ratio Velocity: 31:1 ~ a hundred ninety:one
Output Torque: 650 Nm ~ 50000Nm
Gearbox Material: WCB
Worm Gear Content: QT600-three
Ingress of Security: IP67 ~ IP68
Both the input and output connecting flanges are designed as for each requirements ISO 5210 and ISO 5211.
Associated products
|
US $10-400 / Piece | |
100 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
|
US $10-400 / Piece | |
100 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
Worm reducer gearbox – What You Need to Know
When shopping for a Worm reducer gearbox, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducer gearboxes and the applications that they can be used for. This will help you choose the right unit for your application.
Features
Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer gearbox has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer gearbox is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducer gearboxes also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.
Functions
Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.
Applications
This market report analyzes the Worm reducer gearbox market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm reducer gearbox market.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
Cost
Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.
aspect
Worm reducer gearboxes vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer gearbox should be selected according to the specific application.The worm gear reducer gearbox saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer gearbox is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer gearbox depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducer gearboxes are common. Many gear manufacturers have large stocks of these gear reducer gearboxes. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer gearbox for your application. In addition, the worm gear reducer gearbox is easy to install and maintain.
Worm gear reducer gearbox oil
Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.
editor by czh 2023-01-26
China Nmrv Gear Motor Unit Ratio5~100 Transmission Worm Speed Reducer 180W 1.1kw 2.2kw 7.5kw Copper Wheel Right Angle Gearbox worm gearbox application
Item Description
Nmrv Equipment Motor Device Ratio5~100 Transmission Worm Pace Reducer 180W 1.1KW 2.2KW 7.5KW Copper Wheel Appropriate Angle Gearbox
Features:
one. Mild in fat and non-rusting
2. Sleek in managing, can operate a extended time in dreadful problems
3. Large efficiency, low noise
4. Very good-looking in look, resilient in provider lifestyle, and little in volume
Solution photograph:
Specification for worm gearbox:
| Design | 571 ~ a hundred and fifty |
| Power | .06kw ~ 15kw |
| Enter speed | 750rpm ~ 2000rpm |
| Reduction ratio | one/5 ~ 1/a hundred |
| Enter motor | AC (1 stage or 3 period) / DC / BLDC / Stepper / Servo |
| Output shaft | Reliable shaft / Hollow shaft / Output flange… |
| Dimension common | Metric dimensions / Inch dimensions |
| Content of housing | die-forged aluminum / Solid iron / Stainless metal |
| Components | Flange / Sound shaft / Torque arm / Go over … |
FAQ
Q: Can you make the gearbox with customization?
A: Of course, we can customize for each your ask for, like flange, shaft, configuration, material, etc.
Q: Do you provide samples?
A: Indeed. The sample is accessible for tests.
Q: What is your MOQ?
A: It is 10pcs for the beginning of our business.
Q: What is actually your direct time?
A: Standard merchandise require 5-30days, a little bit lengthier for customized items.
Q: Do you supply technical assist?
A: Sure. Our company have design and style and development team, we can provide specialized help if you
require.
Q: How to ship to us?
A: It is available by air, or by sea, or by train.
Q: How to pay the money?
A: T/T and L/C are desired, with a various currency, which includes USD, EUR, RMB, and many others.
Q: How can I know the merchandise is appropriate for me?
A: >1ST validate drawing and specification >2nd check sample >3rd start mass production.
Q: Can I arrive to your company to visit?
A: Yes, you are welcome to check out us at any time.
Q: How shall we contact you?
A: You can send an inquiry directly, and we will reply within 24 hrs.
|
US $15-25 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Single-Step |
| Type: | Worm Gear Box |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | 025 ~ 150 |
| Power | 0.06kw ~ 15kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/5 ~ 1/100 |
| Input motor | AC (1 phase or 3 phase) / DC / BLDC / Stepper / Servo |
| Output shaft | Solid shaft / Hollow shaft / Output flange… |
| Dimension standard | Metric size / Inch size |
| Material of housing | die-cast aluminum / Cast iron / Stainless steel |
| Accessories | Flange / Solid shaft / Torque arm / Cover … |
|
US $15-25 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Single-Step |
| Type: | Worm Gear Box |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | 025 ~ 150 |
| Power | 0.06kw ~ 15kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/5 ~ 1/100 |
| Input motor | AC (1 phase or 3 phase) / DC / BLDC / Stepper / Servo |
| Output shaft | Solid shaft / Hollow shaft / Output flange… |
| Dimension standard | Metric size / Inch size |
| Material of housing | die-cast aluminum / Cast iron / Stainless steel |
| Accessories | Flange / Solid shaft / Torque arm / Cover … |
How to Select a Gearbox
When you drive your vehicle, the gearbox provides you with traction and speed. The lower gear provides the most traction, while the higher gear has the most speed. Selecting the right gear for your driving conditions will help you maximize both. The right gearing will vary based on road conditions, load, and speed. Short gearing will accelerate you more quickly, while tall gearing will increase top speed. However, you should understand how to use the gearbox before driving.
Function
The function of the gearbox is to transmit rotational energy to the machine’s drive train. The ratio between input and output torque is the ratio of the torque to the speed of rotation. Gearboxes have many different functions. A gearbox may have multiple functions or one function that is used to drive several other machines. If one gear is not turning, the other will be able to turn the gearbox. This is where the gearbox gets its name.
The pitch-controlled system has an equal number of failure modes as the electrical system, accounting for a large proportion of the longest machine downtime and halt time. The relationship between mechanisms and faults is not easily modeled mathematically. Failure modes of gearboxes are shown in Fig. 3. A gearbox’s true service life is six to eight years. However, a gearbox’s fault detection process must be developed as mature technology is required to reduce the downtime and avoid catastrophic incidents.
A gearbox is a vital piece of machinery. It processes energy produced by an engine to move the machine’s parts. A gearbox’s efficiency depends on how efficiently it transfers energy. The higher the ratio, the more torque is transferred to the wheels. It is a common component of bicycles, cars, and a variety of other devices. Its four major functions include:
In addition to ensuring gearbox reliability, a gearbox’s maintainability should be evaluated in the design phase. Maintainability considerations should be integrated into the gearbox design, such as the type of spare parts available. An appropriate maintenance regime will also determine how often to replace or repair specific parts. A proper maintenance procedure will also ensure that the gearbox is accessible. Whether it is easy to access or difficult to reach, accessibility is essential.
Purpose
A car’s transmission connects the engine to the wheels, allowing a higher-speed crankshaft to provide leverage. High-torque engines are necessary for the vehicle’s starting, acceleration, and meeting road resistance. The gearbox reduces the engine’s speed and provides torque variations at the wheels. The transmission also provides reversing power, making it possible to move the vehicle backwards and forwards.
Gears transmit power from one shaft to another. The size of the gears and number of teeth determine the amount of torque the unit can transmit. A higher gear ratio means more torque, but slower speed. The gearbox’s lever moves the engaging part on the shaft. The lever also slides the gears and synchronizers into place. If the lever slips to the left or right, the engine operates in second gear.
Gearboxes need to be closely monitored to reduce the likelihood of premature failure. Various tests are available to detect defective gear teeth and increase machine reliability. Figure 1.11(a) and (b) show a gearbox with 18 teeth and a 1.5:1 transmission ratio. The input shaft is connected to a sheave and drives a “V” belt. This transmission ratio allows the gearbox to reduce the speed of the motor, while increasing torque and reducing output speed.
When it comes to speed reduction, gear box is the most common method for reducing motor torque. The torque output is directly proportional to the volume of the motor. A small gearbox, for example, can produce as much torque as a large motor with the same output speed. The same holds true for the reverse. There are hybrid drives and in-line gearboxes. Regardless of the type, knowing about the functions of a gearbox will make it easier to choose the right one for your specific application.
Application
When selecting a gearbox, the service factor must be considered. Service factor is the difference between the actual capacity of the gearbox and the value required by the application. Additional requirements for the gearbox may result in premature seal wear or overheating. The service factor should be as low as possible, as it could be the difference between the lifetime of the gearbox and its failure. In some cases, a gearbox’s service factor can be as high as 1.4, which is sufficient for most industrial applications.
China dominates the renewable energy industry, with the largest installed capacity of 1000 gigawatts and more than 2000 terawatt hours of electricity generated each year. The growth in these sectors is expected to increase the demand for gearboxes. For example, in China, wind and hydropower energy production are the major components of wind and solar power plants. The increased installation capacity indicates increased use of gearboxes for these industries. A gearbox that is not suitable for its application will not be functional, which may be detrimental to the production of products in the country.
A gearbox can be mounted in one of four different positions. The first three positions are concentric, parallel, or right angle, and the fourth position is shaft mount. A shaft mount gearbox is typically used in applications where the motor can’t be mounted via a foot. These positions are discussed in more detail below. Choosing the correct gearbox is essential in your business, but remember that a well-designed gearbox will help your bottom line.
The service factor of a gearbox is dependent on the type of load. A high shock load, for example, can cause premature failure of the gear teeth or shaft bearings. In such cases, a higher service factor is required. In other cases, a gearbox that is designed for high shock loads can withstand such loads without deteriorating its performance. Moreover, it will also reduce the cost of maintaining the gearbox over time.
Material
When choosing the material for your gearbox, you must balance the strength, durability, and cost of the design. This article will discuss the different types of materials and their respective applications and power transmission calculations. A variety of alloys are available, each of which offers its own advantages, including improved hardness and wear resistance. The following are some of the common alloys used in gears. The advantage of alloys is their competitive pricing. A gear made from one of these materials is usually stronger than its counterparts.
The carbon content of SPCC prevents the material from hardening like SS. However, thin sheets made from SPCC are often used for gears with lower strength. Because of the low carbon content, SPCC’s surface doesn’t harden as quickly as SS gears do, so soft nitriding is needed to provide hardness. However, if you want a gear that won’t rust, then you should consider SS or FCD.
In addition to cars, gearboxes are also used in the aerospace industry. They are used in space travel and are used in airplane engines. In agriculture, they are used in irrigation, pest and insect control machinery, and plowing machines. They are also used in construction equipment like cranes, bulldozers, and tractors. Gearboxes are also used in the food processing industry, including conveyor systems, kilns, and packaging machinery.
The teeth of the gears in your gearbox are important when it comes to performance. A properly meshing gear will allow the gears to achieve peak performance and withstand torque. Gear teeth are like tiny levers, and effective meshing reduces stress and slippage. A stationary parametric analysis will help you determine the quality of meshing throughout the gearing cycle. This method is often the most accurate way to determine whether your gears are meshing well.
Manufacturing
The global gear market is divided into five key regions, namely, North America, Europe, Asia Pacific, and Latin America. Among these regions, Asia Pacific is expected to generate the largest GDP, owing to rapidly growing energy demand and investments in industrial infrastructure. This region is also home to some of the largest manufacturing bases, and its continuous building of new buildings and homes will support the industry’s growth. In terms of application, gearboxes are used in construction, agricultural machinery, and transportation.
The Industrial Gearbox market is anticipated to expand during the next several years, driven by the rapid growth of the construction industry and business advancements. However, there are several challenges that hamper the growth of the industry. These include the high cost of operations and maintenance of gear units. This report covers the market size of industrial gearboxes globally, as well as their manufacturing technologies. It also includes manufacturer data for the period of 2020-2024. The report also features a discussion of market drivers and restraints.
Global health crisis and decreasing seaborne commerce have moderately adverse effects on the industry. Falling seaborne commerce has created a barrier to investment. The value of international crude oil is expected to cross USD 0 by April 2020, putting an end to new assets development and exploitation. In such a scenario, the global gearbox market will face many challenges. However, the opportunities are huge. So, the market for industrial gearboxes is expected to grow by more than 6% by 2020, thanks to the increasing number of light vehicles sold in the country.
The main shaft of a gearbox, also known as the output shaft, spins at different speeds and transfers torque to an automobile. The output shaft is splined so that a coupler and gear can be connected to it. The counter shaft and primary shaft are supported by bearings, which reduce friction in the spinning element. Another important part of a gearbox is the gears, which vary in tooth count. The number of teeth determines how much torque a gear can transfer. In addition, the gears can glide in any position.
editor by czh 2022-11-26
China Best Worm gearbox manufacturer supplier & factory Combined Helical Bevel Gear Unit K Series Gearbox with top quality best prices
We – EPG Group the largest worm gearbox, couplings and gears factory in China with 5 diverse branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
Merged Helical Bevel Equipment Unit K Sequence Gearbox
Description: K Series Helical Bevel Gearbox
Overview
(1) Input manner: coupled motor, belted motor, enter shaft or link flange.
(2) Proper angle output.
(3) Compact construction.
(4) Rigid tooth confront.
(5) Carrying increased torque, large loading ability.
(6) Large precision equipment, making certain the unit to run stably, smooth transmission.
(7) Minimal sound, lengthy lifespan.
(8) Huge overlap coefficient, abrasion resistant.
K series gear models are offered in the adhering to designs:
KAZ..Y..Quick-flange-mounted helical-bevel equipment units with hollow shaft
K…Y…Foot-mounted helical-bevel gear units with sound shaft
KAT…Y…Torque-arm-mounted helical-bevel equipment models with hollow shaft
KAB…Y…Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S…Shaft enter helical-bevel gear units
KA…Y…Helical-bevel equipment units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y..Combinatorial helical-bevel equipment models
KF…Y…Flange-mounted helical-bevel equipment models with sound shaft
KA(K, KF ,KAF ,KAZ)S…R…Shaft enter combinatorial helical-bevel equipment units
KAF…Y…Flange-mounted helical-bevel equipment models with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y…When equipping the user’s motor or the special 1 ,the flange is essential to be related
Framework:
| K(-) |
K(A) | K(F) | Input power range | Output speed | Output torque |
| Foot-mounted | Hollow shaft output |
Flange-mounted | .eighteen-200kw | .1-270r/min | Up to 50000Nm |
Enter electricity score and highest torque:
| Size |
38 | forty eight | fifty eight | sixty eight | seventy eight | 88 | ninety eight | 108 | 128 | 158 | 168 | 188 |
| Construction |
K KA KF KAF KAZ KAT KAB | |||||||||||
| Enter power score(kw) |
.eighteen~ 3. |
.18~ three. |
.18~ five.five |
.18~ 5.5 |
.37~ 11 |
.75~ 22 |
one.3~ 30 |
three~ 45 |
7.5~ ninety |
eleven~ 160 |
11~ two hundred |
eighteen.5~ 200 |
| Ratio | five.36~ 106.38 |
5.81~ 131.87 |
six.fifty seven~ one hundred forty five.15 |
seven.fourteen~ 44.seventy nine |
7.22~ 192.eighteen |
seven.19~ 197.27 |
8.ninety five~ one hundred seventy five.47 |
8.seventy four~ 141.ninety three |
8.68~ 146.07 |
12.66~ a hundred and fifty.03 |
17.35~one 64.44 |
17.ninety seven~ 178.37 |
| Greatest Torque(N.m) |
200 | 400 | 600 | 820 | 1550 | 2770 | 4300 | 8000 | 13000 | 18000 | 32000 | 50000 |
Gear unit fat:
| Measurement |
38 | 48 | fifty eight | sixty eight | 78 | 88 | ninety eight | 108 | 128 | 158 | 168 | 188 |
| Weight |
eleven | twenty | 27 | 33 | 57 | eighty five | 130 | 250 | 380 | 610 | 1015 | 1700 |
The weights are indicate values, only for reference.
Greatest torque means the greatest 1 of the optimum torque related to the distinct ratio for the specified size.
Rated Electrical power:.18KW~200KW
Rated Torque:Up to 50000N.m
Gear Arrangement:Bevel Helical Hardened Gearbox
Enter Velocity:50HZ or 60HZ of 4Pole,6Pole and 8pole motor
Ratio:5.36~192.18
Item Images:
Our firm :
AOKMAN® was started in 1982, which has a lot more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare elements.
We can supply the appropriate resolution for uncountable applications. Our products are widely employed in the ranges of metallurgical, metal, mining, pulp and paper, sugar and liquor market and a variety of other kinds of devices with a sturdy presence in the international market place.
AOKMAN® has turn out to be a dependable provider, in a position to supply substantial top quality gearboxes.With 36 many years expertise, we assure you the utmost reliability and protection for equally item and providers.
Client checking out:
FAQ:
one.Q:What types of gearbox can you produce for us?
A:Major goods of our firm: UDL sequence speed variator,RV sequence worm equipment gearbox, ATA sequence shaft mounted gearbox, X,B sequence equipment gearbox,
P collection planetary gearbox and R, S, K, and F series helical-tooth gearbox, much more
than one particular hundred versions and hundreds of specifications
2.Q:Can you make as for each personalized drawing?
A: Yes, we provide tailored service for clients.
3.Q:What is your conditions of payment ?
A: thirty% ept payment by T/T after signing the agreement.70% prior to supply
4.Q:What is your MOQ?
A: 1 Set
Get in touch with:
If you are intrigued in our solution, welcome you make contact with me.
Our team will help any need to have you may well have.
/ The use of unique tools manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our organization and the shown replacement elements contained herein are not sponsored, accredited, or made by the OEM. /
TXT locking worm gear motor near me China in Yangon Myanmar Shafted Mounted Gear Unit for Conveyer Systems Good Quality Reducer with top quality
We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/
SMRY Reducer Specification
1 Twin Tapered Output Hub
A tapered bore in both sides of the reducer’s output hub snugs up against a matching taper on the outer surface of the bushing. Bushing mounting screws pass through the bushingflange into a mounting collar on the hub. As the screws are tightened, the bushing moves inward, gripping the driven machine’s input shaft tightly and evenly around every pointon its circumference. It is easy-on, easy-off. All the Output Bushing Bore accord to ANSI
2 Precrisio. n High Qua lity Gearing
C ompu ter D e s i g n He lical .Gears, Strong Alloy Materials for High Load Capacity, Case Carburized for long life, Ground Profile Crown tooth Profile, In
Conformance with ISO 1328-1997, 98% Efficiency for Per Stage, Smooth Quiet Operation with Several Teeth in Mesh.
3 Maximum Capacity Housing Design
Close Grain Cast Iron Construction, Excellent Vibration Dampening & Shock Resistance Features, Precision Bored and Dowelled to Ensure Accurate In-Line Assembly.
4 Strong Alloy Steel Shafts
Strong Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions,for Maximum Load and Maximum Torsional Loads. Generous Size Shaft
Keys for Shock Loading .
5 Use adapter for mount the torque arm, increase the strength of the gear case, the torque armeasy-on and easy-off and reliability, controls position of standard torque arm mounting within recommended limits.
6 BackStops
Alternative Parts, anti-run back device, are available on all 15:1 and 25:1 ratio units.
7 Bearings and Oilseals
Bearings are all tapered roll bearings(Except SMRY-2), have long time service time. Oilsealsare Double Lipped Garter Spring Type, Ensuring Effective Oil
Sealing.
8 Torque Arm Assembly
For Easy Adjustment of the Belt.
| size | Nominal ratio 15:1 | Nominal ratio 25:1 | weight lbs |
||||
| Actual Ratio | Maximum Input rpm | Maximum Ouput rpm | Actual Ratio | Maximum Input rpm | Maximum Ouput rpm | ||
| SMRY-2 | 14.04 | 1974 | 140 | 23.37 | 1994 | 85 | 58 |
| SMRY-3 | 14.87 | 2083 | 140 | 24.75 | 2100 | 85 | 98 |
| SMRY-4 | 15.13 | 2118 | 140 | 24.38 | 2072 | 85 | 139 |
| SMRY-5 | 15.4 | 1925 | 125 | 25.56 | 2044 | 80 | 207 |
| SMRY-6 | 15.34 | 1916 | 125 | 25.14 | 2571 | 80 | 285 |
| SMRY-7 | 15.23 | 1827 | 120 | 24.84 | 1863 | 75 | 462 |
| SMRY-8 | 15.08 | 1809 | 120 | 24.62 | 1847 | 75 | 633 |
| SMRY-9 | 15.12 | 1814 | 120 | 25.66 | 1925 | 75 | 760 |
size SMRY-2, 3,4,5,6,7,8,9 , ratio 15:1 ,25:1
SMRY Shafted mounted gear speed reducer:
1) Shafted mounted gear unit for conveyer systems
2) All gears are heat treated and fixed to achieve low noise and high output
3) Mounting dimensions are interchangeable with Fener
Company Profile
l The largest manufacturer and exporter of worm gear reducers in Asia.
l Established in 1976, we transformed from a county owned factory to private one in 1996. HangZhou ept POWER TRANSMISSION EQUIPMENT CO.,LTD is our new name since 2001.
l We are the first manufacturer of reducers and gearboxes in China who was given export license since year 1993.
l “Fixedstar” brand gearboxes and reducers are the first owner of CHINA TOP BRAND and Most Famous Trade Mark for reducers.
First to achieve ISO9001 and CE Certificate among all manufacturers of gearboxes in China.
As a professional manufacturer of worm gearbox and worm gear reducers in China, we mainly produce reduction gearbox,aluminum case worm gearboxes,arc gear cylindrical worm gearboxes, worm gear reducers, in line helical gearboxes, and cyclo drive reducers, etc. These products feature rational structure, stable performance, and reliable quality, and so on. They are widely used in power, mining, metallurgy, building material, chemical, food, printing, ceramic, paper-making, tobacco, and other industries.
We have 600 workers in our factory, which covers 70,000 square meters in HangZhou. We have been ma ept 2,500 units of reducers everyday since 2012. We are proudly exporting 70% of our products to more than 40 countries all over the word. Our customers come from Italy, Germany, USA, Canada, Spain, UK, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries in the world. 30% of them are OEM made for direct manufacturers of other products.
We warmly welcome customers from other parts of the world to visit us. Seeing is believing. We are very confident that after visiting our facility, you will have confidence on our products. We have the latest automatic equipments and experienced workers to ensure the stable quality and large output. We have the most sophisticated technical and engineering team to support most demanding requirement on standard and OEM products.
Loo ept ept to meeting you in HangZhou, China.
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
High worm wheel unit supplier China in Bhopal India Efficiency DC Electric BLDC Brushless Planetary Motor Motor with Gearbox Gear Motor Controller Option for Machinery Equipment with top quality
We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/
High Efficiency DC Electric BLDC Brushless Planetary Motor / Motor with Gearbox / Gear Motor Controller Option for Machinery Equipment
Specification
Voltage: 12V- 310V
Power: 15W-400W
Rated Speed: 2000-3000RPM
Output Speed: Customized
Torque: Customized
Diameter of gearbox: 60-104cm
Detailed Pictures
ept Mechanical Products include:
1. AC (gear) motor
2. DC & BLDC (gear) motor
3. Worm gearbox
4. Helical gearbox
5. Coreless motor
6. External rotor motor
7. Motor controller
8. Customized motor
Company Overview
About Greensky Mechanical
- History: ept Mechanical is a motor brand of ept power company Limited. The brand ept Mechanical was founded in 2012 with investing in a 15 year old motor factory in ZHangZhoug Province. ept Power brought new management concept to the new joint company and increase the quality of the motors as ept Power always provides stable and good quality and service to the society. The Positioning of the brand is medium & high quality level. Our customers are mainly in Europe. We save cost by increasing the efficiency of production and delivery.
- Market: ept has customers in 30 different countries. Germany, Austria, Japan, USA and Middle-East are our main market .
- Mission: “Once and forever” is our goal to serve customers in the world. Once we do business with customer, we will do business forever.
The advantages of wor ept with us are:
1. Convenience. We can provide all types of motor & gearbox by manufacturing and out sourcing.
2. High Quality. All products are <1% defect rate with ≥ 1 year guarantee.
3. Low Cost. We seriously reduce cost on material, processing, assembling, pac ept and delivery.
4. Flexible service. MOQ below 10pcs & customize available & urgent order solution.
5. Fast response. Our principle is response in 15 minutes and provide solution in 24 hours.
We hope you enjoy cooperating with us.
If you have projects that need motors and gear boxes, please freely contact me.
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
Speed worm gear usage wholesaler China in Arak Iran Reducer Gear Motor Geared Motor Unit Worm Helical Bevel Gearbox with Hollow Shaft for Sewing Machine Transmission Conponents with top quality
We – EPG Group the most significant worm gearbox, couplings and gears manufacturing unit in China with five distinct branches. For far more details: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /
speed reducer gear motor geared motor unit worm Helical Bevel Gearbox with Hollow Shaft for Stitching Equipment Transmission conponents
/ The use of original tools manufacturer’s (OEM) element numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our firm and the outlined substitution parts contained herein are not sponsored, accredited, or produced by the OEM. /
Nmrv in Macao China, Macao SAR worm gear unit wholesaler China Aluminum Type Worm Gearbox with top quality
We – EPG Team the greatest worm gearbox, couplings and gears manufacturing facility in China with 5 diverse branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828 /
NMRV Aluminum Type Worm Gearbox
| Kind | Worm Gear Speed Reducer Gearbox |
| Model | NMRV25-a hundred and fifty |
| Ratio | five&comma7&period5&comma10&comma15&comma20&comma25&comma30&comma40&comma50&comma60&comma80&comma100 |
| Color | Blue &sol Silver or OEM hues |
| Content | Housing-Casting iron-HT200&num &sol Aluminium |
| Worm Gear | KK alloy |
| Worm | 20CrMnTi with carburizing and quenching&comma surface area hardness is fifty eight-62HRC |
| Shaft | chromium metal-forty five&num |
| Packing | Paper Carton&commaPlywood box &sol for every established&lparWith foam board within&rpar |
| Bearing | Brand name “HRE”&comma”C&U” Bearing |
| Seal | NAK or SKF |
| Input Power | &period06-15KW |
| Usages | In industrial machine&colon Food stuff&commaCeramics&commachemical&comma aswell as packing&comma printing&comma dyeing&commawoodworking&comma glass and plastics&time period&time period |
| IEC Flange | 56B5&comma63B5&comma80B5&comma90B5&comma100B5&comma112B5&comma132B5&period&time period&interval&period of time |
| Lubricant | BODA Artificial oil&lparRV030-ninety&rpar&commaG-N460W Mineral oil&lparRV110-a hundred and fifty&rpar |
/ The use of authentic equipment manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our firm and the listed substitution parts contained herein are not sponsored, accredited, or produced by the OEM. /